Dream On Me 393 2 in 1 Bedside Sleeper and Bassinet Instruction Manual

Dream On Me 393 2 in 1 Bedside Sleeper and Bassinet

Scan the QR code to register your product https://dreamonme.com/customercare/registration/

Read all instructions before assembling and using the product.

IMPORTANT – Keep instructions for future use.

WARNING
Failure to follow these warnings and instructions could result in serious injury or death.

FALL HAZARD – A bassinet is designed to provide a sleeping area for an infant until he or she begins to push up on hands and knees or can roll over or has reached 25lbs, whichever comes first, which is about 5 months of age.

SUFFOCATION HAZARD!
Infants have suffocated:

• In gaps between extra padding and the side of the bassinet/cradle, and On soft bedding.
• Use ONLY the pad provided by Dream
• On Me. NEVER add a pillow, comforter, or another mattress for padding.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep unless otherwise advised by their physician. lfa sheet is used with the pad, use only the one provided by Dream On Me to fit the dimensions of the bassinet mattress. Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a bassinet or attach strings to toys. NEVER leave your child unattended, allowing your child near the bassinet.

AVOID SUFFOCATION HAZARDS

• Baby can suffocate in gaps between a mattress too small or too thick and product sides and on soft bedding.
• NEVER add a mattress, pillow, comforter, or padding to the product.
• If a sheet is used, only use a fitted sheet that tucks at least 5cm under the floor pad on all sides to avoid entanglement.
• Never leave a child in the product with any side lowered. Be sure all sides are raised and locked into position whenever a child is in the product.
• Never use plastic shipping bags or another plastic film as mattress covers not sold and are intended for that purpose. They can cause suffocation.
• Never use a water mattress with this product.

AVOID STRANGULATION HAZARDS

• Strings can cause strangulation! Never place items with a string around a child’s neck such as hood strings or pacifier cords.
• Never suspend strings over products or attach strings to toys.
• When a child is able to pull to a standing position, remove large toys, and other objects that could serve as steps for climbing out.
• Never suspend strings into the play yard.
• Children in the play yard must be under supervision at all times.
• Never place the play yard near a window where cords from blinds or drapes can strangle a child.

Safety Advice
Keep the soft objects and bedding away from infants and do not use them in bassinets/bedside sleepers because they can inadvertently lead to suffocation. Furthermore, bedding has been associated with sudden infant death syndrome.

BEDSIDE SLEEPER

WARNING

• Always use ALL required parts for each use mode in the bassinet or bedside sleeper.
• Always read and follow assembly instructions for each product use mode (bedside sleeper or bassinet).
• Check the instruction manual for a list of required parts. Periodically check the product for loose, damaged, or missing parts.
• A bedside sleeper is designed to provide a sleeping area for an infant until he or she begins to push up on hands and knees or reaches approximately 5 months of age. Move your child to another sleeping product when your child reaches this stage.
• This bedside sleeper is designed for use only with adult beds that are between 17 .2 and 22.4 inches from floor to top of the adult mattress.
• The mattress, box spring, and bed frame must share the same width. The product cannot attach to the adult bed if the frame is bigger than the box spring.
  • ACCEPTABLE BED FRAME IN-LINE
  • UNACCEPTABLE BED, MATTRESS, BOXSPRING & FRAME NOT IN-LINE

WARNING

Entrapment Hazard -To prevent death from entrapment, the bedside sleeper must be properly secured to the adult bed using the connecting belts.

1. There must be no more than a 1/2 inch(13mm) gap between the bedside sleeper and the adult bed.
2. Check tightness before each use by pulling the bedside sleeper in the direction away from the adult bed
3. If the gap exceeds 1/2 inch(13mm). DO NOT use the product.

Do not fill the gap with pillows, blankets, or other items that are suffocation hazards.

Notice for using connecting belts: Fasten the belts and put the boxspring back.

• The connecting belt (attachment system) must always be used and properly secured to adult bed by tightening the connecting belt while using in bedside sleeper mode.

• To avoid death from the infant’s neck being caught on the top rail on the side that is next to the adult bed, the top rail must be no higher than the adult bed mattress.
  CORRECT
  THE TOP RAIL IS LOWER THAN THE ADULT BED MATTRESS.
  WRONG
  THE TOP RAIL IS HIGHER THAN THE ADULT BED MATTRESS.

• The below parts are required for the bedside sleeper, DO NOT use the bedside sleeper if any parts are missing, damaged, or broken. Contact Dream On Me for replacement parts and instructional literature if needed. DO NOT substitute parts.

  • Bedside sleeper frame, including of cover and removable top rail
  • Connecting Belts 2pcs
  • Mattress pad

Maintenance and Care

To clean, use only mild household soap or detergent and warm water on a sponge or clean cloth. Check the product for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed. Discontinue use of the bedside sleeper should it malfunction or become damaged or broken. Please contact Dream On Me for repair or to obtain replacement parts.

PARTS LIST

Please check to make sure that all of the following parts are included in the box hen opened. If there are any missing parts, please contact Dream On Me before using the product.

Assemebling the bassinet

• Step 1
  Connect the side frames to the support bar and click them into place

• Step 2
  Insert the bassinet into the side frames until they click into place

• Step 3

1. Insert the bassinet support into the bassinet sleeves.
2. Insert the bassinet support into the locks underneath the bassinet until they lock and click into place.

• Step 4
  Place the mattress pad into the bassient with the padded side up. Pull the velcro staps underneath the mattress pad and velcro them underneath the bassinet.

Bassinet Functions

Height Adjustment
The bassinet can be adjusted to 7 different height positions. To adjust the height:

1. Pivot the safety lock.
2. Pull on the handles on both sides at the same time.
3. Lift or lower the bassinet to the desired height.

WARNING: The two height for both sides of the bassinet MUST be the same height. (e.g. If the right leg in position 1, then the left leg must in position 1 as well).

Locking and unlocking the wheels
Lock and unlock the wheels as shown to the right before using.

To Switch to Bedside Sleeper Mode

• Step 1

1. Open the zipper.
2. Slide the release button to open the 4th side of the bassinet.

• Step 2
  Fasten the connecting belt buckles around the frame of the adult bed.

• Step 3
  Fasten the connecting belt buckles on the side of bedside sleeper.

1. Insert the connecting belt into the fixed straps on both sides of the bassinet.
2. Fasten the buckles until they lock into place with a ‘click’.

• Step 4

1. Adjust the height of bassinet as explained on page 10.
2. Tighten the connecting belts.
3. PLEASE ADHERE TO ALL OF THE WARNINGS IN THE BEGINNING OF THE MANUAL.  

Note: Make sure that the buckles are securely fastened when using the bedside sleeper.

Locking and unlocking the wheels
Lock and unlock the wheels as shown to the right before using. The wheels must be locked when in bedside sleeper mode.

WARNING
The connecting belt (attachment system) must always be used and properly secured to adult bed by tightening the connecting belt while using in bedside sleeper mode.

ATTENTION
After fixing the Bedside Sleeper, please try to pull on the Bedside Sleeper to ensure that the gap between the Bedside Sleeper and the adult bed does not exceed 13mm, if it is more than 13mm, readjust the adjusting buckles on the connecting belt. Before using the Bedside Sleeper, please check whether the connecting belt has been tightened. When the Bedside Sleeper is connected to the adult bed, the lifting rail of the bassinet must be at the lowest position, and the height shall be lower than the adult bed to avoid the baby falling off of the bedside sleeper.

WARNING
When the bedside sleeper is attached/tied to the bed, that the actual bassinet must remain straight and not lopsided. If the bassinet is not straight/flat, contact our customer service immediately for help.

1532, S. Washington Avenue Piscataway, NJ 08854 E-mail: info@dreamonme.com  www.dreamonme.com Follow us on

• @dreamonmeinc
• @dreamonmeinc

to get your nursery featured on our social media.

• Enter our monthly giveaway!
  • Simply scan the QRcode to register.
• Chat with us!
  • For any questions or concerns or feedback.

References

• One moment, please...
• Product Recall Registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>