TW Steel OS20 Miyota Movement User Manual
- June 9, 2024
- TW STEEL
Table of Contents
TW Steel OS20 Miyota Movement
Instructions
TW Steel is a watch brand harmoniously combining both design and innovation. ‘The Watch in Steel’ leads the oversized market with style and quality guaranteed. TW Steel values the most important relationship of all the one with the consumer. To express this, we hereby give you all the information that you need to enjoy your TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict controls before the
watch leaves the factory.
The way in which you wear or treat your TW Steel will determine whether the
appearance of the watch is maintained in the future, or whether it will
deteriorate. In order to enjoy wearing your TW Steel as long as possible, we
include a number of tips: If the watch comes into contact with hard or
corrosive materials, this can cause damage, which, if it occurs regularly,
will become clearly visible in the form of scratches.
Your watch should be cleaned with a soft cotton cloth that is not impregnated
with any cleaning material. Absolutely no cleaning materials should be used.
It is advisable to regularly polish your watch with a soft cotton cloth. The
watch is a precision mechanical instrument and should be treated as such.
Adjusting the time or date, opening or closing the crown or crowncap, should
not be done roughly, but carefully.
SETTING THE TIME
- Pull the crown out to the 2nd position.
- Turn the crown to set hour and minute hands.
- When the crown is pushed back to the normal position, small second hand begins to run.
SETTING THE DATE
-
Pull the crown out to the 1st position.
-
Turn the crown counter-clockwise to set the date.
If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. -
After the date has been set, push the crown back to the normal position.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time in 1/1 second united up to a maximum of 59 minutes and 59 seconds. The chronograph second hand keeps running continuously for 59 minutes and 59 seconds after starting.
Measuring time with the stopwatch
- The chronograph can be started and stopped each time button “A” is pressed.
- Press button “B” to reset the chronograph and the chronograph second hand, chronograph minute hand, and chronograph hour hand return to the zero positions.
CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not
return to the Zero position after the chronograph has been reset, and
including after the battery has been replaced.
-
Pull the crown out to the 2nd position.
-
Press the button “A” to set the chronograph second hand to the Zero position.
The chronograph hands can be advanced rapidly by continuously pressing button “A”. -
Once the hand have been zeroed, return the crown to the normal position.
Note: Do not push crown to normal position while the chronograph second
hand returns to zero position. It stops on the way when crown are returned to
normal position and its position is recognized as zero position.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>