TW STEEL 6S10 Smartwatch User Guide
- June 9, 2024
- TW STEEL
Table of Contents
TW STEEL 6S10 Smartwatch
TW Steel is a watch brand harmoniously combining both design and innovation. ‘The Watch in Steel’ leads the oversized market with style and quality guaranteed. TW Steel values the most important relationship of all – the one with the consumer. To express this, we hereby give you all the information that you need to enjoy your TW Steel watch to the fullest
MAINTENANCE
- TW Steel uses the best materials and carries out strict controls before the watch leaves the factory. The way in which you wear or treat your TW Steel will determine whether the appearance of the watch is maintained in the future, or whether it will deteriorate. In order to enjoy wearing your TW Steel as long as possible, we include a number of tips: If the watch comes into contact with hard or corrosive materials, this can cause damage, which, if it occurs regularly, will become clearly visible in the form of scratches.
- Your watch should be cleaned with a soft cotton cloth that is not impregnated with any cleaning material. Absolutely no cleaning materials should be used. It is advisable to regularly polish your watch with a soft cotton cloth. The watch is a precision mechanical instrument and should be treated as such. Adjusting the time or date, opening or closing the crown or crowncap, should not be done roughly, but carefully.
SETTING THE TIME
- Pull the crown out to the 2nd Click Position.
- Turn the crown clockwise to set hour and minute hands.
- After the time has been set, push the crown back to the Normal position.
SETTING THE DATE
-
Pull the crown out to the 1st Click Position.
-
Turn the crown clockwise to set the date.
If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. -
After the date has been set, push the crown back to the Normal position
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time accurately to 1/20th
of a second, up to a maximum of 59 minutes and 59 seconds. The chronograph
1/20 second hand keeps running continuously for 30 seconds after starting and
then stops at Zero position.
Measuring time with the stopwatch
- Press button “A” to start the chronograph.
- The chronograph can be started and stopped each time button “A” is pressed.
- Press button “B” to reset the chronograph and chronograph minute and second hands return to their Zero positions.
CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the chronograph second hand does not
return to the Zero position
-
Pull the crown out to the 2nd Click Position.
-
Press the button “A” once to set the chronograph second hand to the Zero position.
-
Press the button “B” once to set the chronograph 1/20 second hand to the Zero position.
The chronograph hands can be advanced rapidly by continuously pressing button “A” or “B”. -
Once the hands are set at Zero position, reset the time and return the crown to its Normal position.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>