TW STEEL VD54 Smartwatch User Manual
- June 9, 2024
- TW STEEL
Table of Contents
TW STEEL VD54 Smartwatch
TW STEEL
TW Steel is a watch brand harmoniously combining both design and innovation.
‘The Watch in Steel’ leads the oversized market with style and quality
guaranteed. TW Steel values the most important relationship of all – the one
with the consumer. To express this, we hereby give you all the information
that you need to enjoy your TW Steel watch to the fullest.
MAINTENANCE
TW Steel uses the best materials and carries out strict controls before the
watch leaves the factory.
The way in which you wear or treat your TW Steel will determine whether the
appearance of the watch is maintained in the future, or whether it will
deteriorate. In order to enjoy wearing your TW Steel as long as possible, we
include a number of tips: If the watch comes into contact with hard or
corrosive materials, this can cause damage, which, if it occurs regularly,
will become clearly visible in the form of scratches.
Your watch should be cleaned with a soft cotton cloth that is not impregnated
with any cleaning material. Absolutely no cleaning materials should be used.
It is advisable to regularly polish your watch with a soft cotton cloth. The
watch is a precision mechanical instrument and should be treated as such.
Adjusting the time or date, opening or closing the crown or crowncap, should
not be done roughly, but carefully.
DISPLAY AND CROWN / BUTTONS
CROWN
There are two types of crown, a normal crown and a screw-lock type crown.
Please check the type of the crown of your watch.
HOW TO ADJUST THE STOPWATCH HANDS POSITION
- If the stopwatch is functioning: A → B
- If the stopwatch is stopped: B
- If the split time is displayed: B → A → B
-
Pull out the crown.
-
Press the button A or B to reset the stopwatch second and minute hands to the“ 0” position. The second hand stops immediately.
By pressing the button A, the STOPWATCH second and minute hands position could be reset. (counter-clockwise direction).
By pressing the button B, the STOPWATCH second and minute hands position could be reset. (clockwise direction). -
Push the crown back to the normal position.
HOW TO SET THE DATE AND TIME
Note: Before setting the time, make sure to check that the stopwatch measurement is stopped.
-
Pull out the crown when the second hand is at the 12 o’clock position. The second hand will stop immediately.
Do not press any button, as this will move the stopwatch hands. -
Turn the crown to set the minute hand to the desired time.
-
Push the crown back to the normal position in accordance with a time signal.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!