rizoma DBL001 Dynamic Brake Light Sensor User Manual

rizoma DBL001 Dynamic Brake Light Sensor

Welcome to Rizoma

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

General conditions

Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding. Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
   your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).

2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
   correct functioning of the product.

3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
   suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike. Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never tr to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.

• The DBL system is a safety device that activates a flashing stop light in order to warn vehicles behind of an intense and sudden braking. The device, when properly mounted on the motorcycle, is activated when the vehicle undergoes a sudden deceleration, by flashing the stop light with a frequency of 4 Hz. The DBL is activated as soon as the rider brakes suddenly and continues to work for the next 4.5s even with less deceleration. The device will not operate at speeds under 40 km / h. The DBL can be connected to the bike’s rear light, or to our multi-functional indicators: FR115/FR125/FR155/FR165. The DBL is an accelerometer and consequently doesn’t require any connection to the brake hydraulic system.

Dynamic brake light system

• Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. The warrantee is not valid for any electric wires cutting or any product modify or tampering.
• Improper installation could damage the electrical system of the motorcycle and cause a fire, resulting in personal injury or death. Electrical shock hazard. Disconnect the battery before starting to install turn license plate bracket or rear light or the turn signals. The pins must always be isolated and respect the polarity in the connections. The warrantee is not valid for any electric wires cutting or any product modify or tampering.

INSTALLAZIONE INSTALLATION

Step 1

• Your garantee will not apply if the tail light has not been correctly installed and connected to the electrical supply on your motorbike. Do not carry out the installation unless you are specifically trained to do so; otherwise, please contact an authorized dealer Rizoma. Your garantee does not apply to damage due to wrong connection or excess voltage. Improper mechanical installation or orientation of the tail light may invalidate your motorbike’sroadworthiness and insurance protection, or even lead to accidents. Check that your tail light are securely fitted before you ride your motorbike. Your tail light may heat up during use. Contact with bare skin or heat-sensitive objects may lead to damage or injury. Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.

COLLEGAMENTI ELETTRICI ELECTRIC CONNECTIONS

Disconnect the battery before starting to install the tail light. To avoid damage to the electrical system of the bike, for electrical connection of the tail light we recommend tu use the Rizoma electric wiring. Arrange the wires to protect them from splash water and fasten them as appropriate, such as with wire connectors. Reconnect the motorbike battery and test the tail light.

Step 3

CONNECTIONS SOLUTION 1

Step 4

CONNECTIONS SOLUTION 2

Step 5

CONNECTIONS

Step 6

REGULATE

Step 7

RESET

FOR THE RESET OF THE DBLO01:

• KEEP PUSHED THE BUTTON AND KEEP DOING THE BRAKE LEVER;
• THE REAR LIGHT WILL FLASH FOR 3 TIMES. THE RESET IS CORRECT. AFTER THE RESET THE DBLO01 WILL BE SETTLED IN THE FACTORY SETTING (see regulate step).

Step 8

Warnings

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort(personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full-finger gloves, boots, and body armor.Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes

Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>