rizoma EE164 Wiring Kit with Resistors User Manual
- June 9, 2024
- rizoma
Table of Contents
EE164 Wiring Kit with Resistors
User Manual
EE164 Wiring Kit with Resistors
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personnel. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or failure
to observe all the assembly instructions. We also invite you to comply with
the provisions of the Highway Code and Traffic rules and/or to additional
regulations in force in your Country.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
**** Descriptions preceded by this symbol contain information, instructions,
or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety Rizoma suggests to
always contact
your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
PART NUMBER
EE164
Wiring kit with resistors for Rizoma turn signals
N°01 resistor da 100 ohm 2
watt e n°01 resistor 47 ohm 3 watt.
Before you start mounting the product please check the completeness of
the kit on the part list. The difficulty level and the time of assemblage
shown do not include the removal of OEM components. The warrantee is not valid
for any electric wires cutting or any product modify or tampering.
Improper installation could damage the electrical system of the
motorcycle and cause a fire, resulting in personal injury or death. Electrical
shock hazard. Disconnect the battery before starting to install turn license
plate bracket or rear light or the turn signals. The pins must always be
isolated and respect the polarity in the connections. The
warrantee is not valid for any electric wires cutting or any product modify or
tampering.
| DIFFICULTY LEVEL| Simple
---|---|---
| TIME OF ASSEMBLAGE| 3-5 min
INSTALLATION
Step 1
**** Your guarantee will not apply if the turn signal has not been
correctly installed and connected to the electrical supply on your motorbike.
Do not carry out the installation unless you are specifically trained to do
so; otherwise, please contact an authorized dealer Rizoma. Your guarantee does
not apply to damage due to wrong connection or excess voltage. Improper
mechanical installation or orientation of the turn signal may invalidate your
motorbike’s roadworthiness and insurance protection, or even lead to
accidents. Check that your turn signal are securely fitted before you ride
your motorbike. Make sure that your motorbike is standing firmly before you
start work, as a fall may lead to damage to the motorbike or injury to you or
others.
COLLEGAMENTI ELETTRICI ELECTRIC CONNECTIONS
PART NUMBER
EE164
**** Disconnect the battery before starting to install the resistors. To
avoid damage to the electrical system of the bike, for electrical connection
of turn signal and resistor we recommend using the Rizoma electric wiring.
Consult the Rizoma catalog or the web site www.Rizoma.com to choose the
correct electric wiring. Arrange the wires to protect them from splash water
and fasten them as appropriate, such as with wire connectors. Reconnect the
motorbike battery and test the turn signal. Align the turn signal as described
above. Install the resistors in such a way that heat can escape effectively.
These measures may disable the rapid flashing function to alert the rider that
one of the turn signal is no longer working. Check your turn signal before
each motorcycle trip. These resistors will heat up if the turn signal is used
for an extended period. Make sure that other components or person are safe.
MONTAGGIO CABLAGGIO ELETTRICO INSTALL ELECTRIC WIRING
Step 3
Attention: connect to the original connector ** Attention: connect to
the female fastons the direction indicator. Refer to the instruction manual
for connection.
Warnings
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
** Some of our products may not be approved for road circulation in the
countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its
products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>