EUROfase 37038 LED Pendant Instruction Manual
- June 9, 2024
- EUROfase
Table of Contents
EUROfase 37038 LED Pendant
Installation instruction
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for the installation of this lighting fixture.
- Before installing the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be In accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type, and number of conductors.
- Attach the junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire,
- attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not Included; Flathead screwdriver, Philips screwdriver, Pliers, Electrical tape, and Wire cutters.
- Helpful Toos (not included): Wire strippers, Ladder
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>