ProtoArc EM12 Wireless Mouse User Manual
- June 9, 2024
- ProtoArc
Table of Contents
EM12
User Manual
Macro Mouse
support@protoarc.com | www.protoarc.com
By Default
A Left Button
B Right Button
C Forward
D Backward
E Disabled
F Disabled
G Middle buntton
H DPI Switch Button
I Charging/low battery indicator
J Power Switch
K USB Receiver
*All buttons are macro-enabled
Product Parameters
DPL:800-1200(default)-1600-2000-2400 DPI
Return rate: 250Hz
Operating voltage: 3.7V
Working current: <10mA
Working distance: 10m / 32 ft
Mouse button life: 3 million times
Mouse size: 117.3×71.3×39.5mm / 4.6×2.8×1.6″
Mouse weight: 55g ± 5g / 1.9oz
System interface: PC available USB interface
Power prompt
Charging: indicator light is on in blue while charging, and turns off when
fully charged.
Low Battery: indicator light fash every second in red.
Sleep Mode: the mouse will auto-sleep after 15 minutes without any activity,
press any button to wake the mouse.
Start the installation application
Install the mouse:
Remove the receiver from the bottom of the mouse, plug it directly into the USB port of the device, turn on the on/off button, the mouse is ready to use.
How To Install Driver:
Please visit our website at ( https://www.protoarc.com ).
Go to Menu–Support—Download.
Find and download the driver for ProtoArc EM12 , then unzip the downloaded driver and double click to run (the driver installation is only applicable to windows system ).
Driver main interface:
Button Settings:
Click the desired button customization in the left panel and select a new function from the drop-down menu to use it directly.
Mouse settings:
Movement speed adjustment
- Click “Improve pointer percision”
- Adjust the mouse movement speed
- Adjust the scroll wheel movement speed
- Adjust the speed of double click.
Return rate adjustment:
Adjustable mouse return rate: 152Hz-250Hz-500Hz.
DPI settings:
5 differrent levels of DPI can be adjusted to the most ideal state
Multimedia shortcuts and key combinations customization settings:
18 multimedia buttons can be used by your choice
Customizable combination of shortcut keys (click the desired key and then enter the compound letter)
Macro settings:
- Click “New Macro” and customize the macro name.
- Click “Start Record” and enter your own definition and then click “Stop Record” and click “Save” to finish recording. You can record multiple macro definitions.
- Save the definition profile: Edit the name of the function you defined and save it on your computer.
- Export the definition profile: export the profile saved on the computer directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>