ProtoArc EK01 Backlit Wireless Ergonomic Keyboard User Manual
- June 9, 2024
- ProtoArc
Table of Contents
ProtoArc EK01 Backlit Wireless Ergonomic Keyboard
Product Features
Keyboard Backlit Switch:
The first press turns on the backlight dimly;
The second press, brightens to medium brightness;
The third press, turns the light to its brightest;
The fourth press, turns off the backlit.
The keyboard will enter deep sleep mode after 30 minutes without operation,
the backlight will be turned off automatically, you can press any key to wake
the keyboard.
Note: the backlight needs to be turned on again.
2.4G Connection
-
Turn on the power switch to ON.
-
Get the USB receiver read
-
Plug the USB receiver into USB port of your computer.
-
Press to switch to 2.4G channel, when the white indicator light flashes slowly, 2.4G channel is connected.
Bluetooth Connection
-
Turn the power switch ON
-
Short press the corresponding Bluetooth chann , the white indicator light will flash once on the corresponding channel.
-
Hold and press the Bluetooth channel button for 3 to 5 seconds, when the white indicator light starts flashing quickly, it enters Bluetooth pairing mode.
Windows 10 OS
❹ Click “Bluetooth Devices”.
❺ Click “Add or Remove Bluetooth Devices”.
❻ Your computer will automatically search for “ProtoArc EK01” then click
“pair”.
❼ “ProtoArc EK01 ” is now connected
Mac OS
Please complete the Bluetooth connection step G)0@ before pairing.
❹ Click “System Preferences” on Mac
❹ Click “Bluetooth” in “System Preferences”
❻ Your computer will automatically find “ProtoArc EK01 “, then click “pair”,
it will be ready for use after installation.
iOS
Please complete the Bluetooth connection step G)@® before pairing.
❹ Click “Setting” on the device and then turn ON Bluetooth.
❺ Your computer will automatically find “ProtoArc EK01 “, then click “pair” to
complete pairing.
❻ “ProtoArc EK01 ” is connected.
Android OS
Please complete the Bluetooth connection step CD@® before pairing.
❹ Click “Setting” on the device and then turn on Bluetooth.
❺ Your computer will automatically find “ProtoArc EK01 “, then click “pair” to
complete pairing.
❻ “ProtoArc EK01” is connected.
How to Switch Device Channels
After pairing/connection, simply press the channel button to switch to the
corresponding device.
Keyboard Charging
When the battery is low, the white indicator light on the button of the
channel in use will start to flash until the device shuts down. Please charge
the keyboard as soon as possible to ensure it has sufficient power for stable
connection.
If the battery is too low, it may cause poor connection quality, resulting in
delays or other problems while using. Charge in time to avoid these problems.
Power indicator light is red while charging, and will turn green when fully
charged. A full charging cycle is about 2 to 3
hours.
Multimedia Function Button
Buttons
| Windows| Android| iOS|
MAC OS
---|---|---|---|---
|
Decrease brightness
| Decrease brightness| Decrease brightness| Decrease brightness
| Increase brightness| I ncrease brightness| I ncrease brightness|
I ncrease brightness
|
Window switching
| Window switching| I| Multi-window preview
| Multi-window preview| I| App switching|
App switching
|
Show desktop
| I| I|
Show desktop
|
Search
| Search| Search|
Search
|
Select all
| Select all| Select all|
Select all
|
Copy
| Copy| Copy|
Copy
|
Cut
| Cut|
Cut
|
Cut
|
Paste
| Paste| Paste|
Paste
|
Mute
| Mute| Mute|
Mute
|
Home
| Home| Home|
I
|
Screenshot
| Screenshot| Screenshot|
Screenshot
|
Lock
| I| L ock|
Lock
|
Volume up
| Volume up| Volume up|
Volume up
|
Volume down
| Volume down| Volume down|
Volume down
|
Previous
| Previous| Previous|
Previous
|
Play&Stop
| Play&Stop| Play&Stop|
Play&Stop
|
Next
| Next| Next|
Next
|
press FN+ESC to turn ON / OFF the FN function
Product Specification
| Project Name | Specifications |
|---|---|
| Applicable System | 2.4G: Microsoft system |
Bluetooth: Windows8, Windows10 or higher, Mac os X 10.12 or higher, Android4.3
or higher.
Battery Capacity| 1100mAh
Sleep Mode| Go to sleep after 30 minutes of no operation
Battery Life| 1000 charge and discharge cycles
Button Life| 3 million keystrokes test
StandbyTime| 200 h
Awake Mode| Click any key to wake up
Effective Distance| 8 m / 26 ft
Working Current| < 3mA
Size| 423.8 x 231.4 x 27.7mm / 16.7″ x 9.1″ x 1.1″
Tips
- If keyboard fails to connect, switch the keyboard power OFF then turn it back ON, retry the Bluetooth connection procedures again. Clear the current Bluetooth connection list, remove current devices and then reconnect.
- To switch to a already connected channel, please wait for 3 seconds after pressing the switch device button for it to respond.
- The keyboard has memory function, when a keyboard channel is successfully connected, that channel connection will remain connected in the default channel.
The corresponding indicator light will be on.
Sleep Mode
- When the keyboard stays idle for more than 30 minutes, it will automatically enter sleep mode and the indicator light will be off.
- To wake the keyboard, simply press any key on the keyboard and it will be ready within 3 seconds. The indicator light will turn on again.
What’s In Package
- 1 * Wireless Bluetooth Keyboard
- 1 * USS Receiver
- 1 * Type-C Charging Cable
- 1 * User Manual
Customer Support
support@protoarc.com
www.protoarc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>