ProtoArc EKM02 2.4G Wireless Keyboard and Mouse Combo User Manual
- June 5, 2024
- ProtoArc
Table of Contents
ProtoArc EKM02 2.4G Wireless Keyboard and Mouse Combo
What’s in Package
Wireless Keyboard
Wireless Mouse
User Manual
► USB Receiver
► Type-C Charging Cable
Product Overview
2.4G Wireless Connection
-
Switch both the keyboard and mouse power ON.
-
Remove the cover in the bottom of the mouse to find the USB receiver.
-
Plug receiver into the USB port.
Charging
Charging Tips: The indicator light is r•ed when the keyboard is charging, and blue when fully charged. The ·indicator Ught ls red when the mouse is charging, and blue when fully charged. (Charge with 5V-1A computer interface).
Low power prompt: When the power of the keyboard and mouse is lower than 3.4V, the red light of the low power prompt light will flash once a second, please charge it in time or it will affect the normal use.
Sleep time: The keyboard sleep time is 10 minutes, press any key to wake up, The mouse sleep time is 30 minutes, press any button to wake up.
Specifications
Wireless Keyboard
| System Compatibility | Windows system, MAC system |
|---|---|
| Operating Distance | SM / 26.2 ft |
| Operating Voltage | 2mA |
| Operating Current | 6.0mA |
| Stand-by Current | ≤0.4mA |
| Dormant Current | 18uA |
| Wake From Sleep Mode | Press any key to wake up |
| Battery Life Per Charge | 250 Hours |
| Stand-by Time | 250 days |
| Keyboard Size | 419 x 220 x 19 mm / 16.5″ x 8.7″ x 0.8″ |
W i r e l ess M ouse
| System Compatibility | Windows system, MAC system |
|---|---|
| Mouse DPI | 800-1200-1600 DPI |
| Operating Distance | ≥8M / 26.2 ft |
| Operating Voltage | 1.5V |
| Operating Current | ≤22mA |
| Stand-by Current | ≤0.4mA |
| Dormant Current | ≤0.3mA |
| Stand-by Time | ≥100 days |
| Battery Life Per Charge | >36 Hours |
| Mouse Size | 107 X 69 X 41 mm / 4.2” X 2.7” X 1.6″ |
Multimedia Function Key
Note: The FN function is for alternate commands (F1-F12 & multimedia
functions are dual-use keys).
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Chang,es or modifications no1t expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device comrplies with Part 15 of the FCC Rules Operatio,n is subject to
the following two conditions:
(1) this device may not cause hanmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
[email protected] | www.protoarc.com