WOLF ICBSO3050TE 76cm E Series Transitional Built In Single Oven User Guide

June 4, 2024
Wolf

76 CM E SERIES TRANSITIONAL BUILT-IN SINGLE OVEN
ICBSO3050TE/S/TWOLF ICBSO3050TE 76cm E Series Transitional Built In
Single Oven -

FEATURES

Wolf’s dual convection system provides reliably even heat, reduces hot and cold spots, and enables consistent multi-rack cooking
Ten cooking modes, including Bake, Broil, Convection, Convection Roast, Dehydrate, Gourmet, Proof, Roast, Stone, and Warm, were developed by Wolf chefs to maximize the performance of your oven
Gourmet Mode offers nearly 50 presets to automatically cook a delicious set of impressive dishes
The large full-color touch screen and stainless touch controls are intuitive and easy-to-read
The temperature probe alerts you when your dish has reached the desired temperature
The oven offers self-clean, delayed start, timed cook, and Sabbath features
Coordinates with other Sub-Zero and Wolf appliances

ACCESSORIES

30″ (762 mm) Broiler Pan
Bake Stone Kit
Baking Sheet
Dehydration Rack Set
Full-Extension Ball-Bearing Rack
Multifunction Pan
Standard Oven Rack
Temperature Probe
Accessories are available through an authorized dealer.

PRODUCT SPECIFICATIONS

Model ICBSO3050TE/S/T
Dimensions 759mmW x 723mmH x

584mmD
Oven 1 Interior
Dimensions| 635mmW x 419mmH x
483mmD
Overall Capacity| 131 L
Usable Capacity| 113 L
Door Clearance| 543mm
Weight| 124 kg
Electrical Supply| 220-240 VAC; 50/60 Hz
Electrical Service| 3.8-4.8 kW

ELECTRICAL

NOTE: Dimensions in parenthesis are in millimeters unless otherwise specified

DIMENSIONS

WOLF ICBSO3050TE 76cm E Series Transitional Built In Single Oven -
DIMENSIONS

FLUSH INSTALLATION

WOLF ICBSO3050TE 76cm E Series Transitional Built In Single Oven - FLUSH
INSTALLATION

*Shaded areas will be visible and should be finished to match cabinetry.
Dimension provides minimum reveals.
NOTE:** Location of electrical supply within opening may require additional cabinet depth.

GUIDE ONLY.

THESE SPECIFICATIONS ARE A GUIDE ONLY. Not suitable for cabinetry, installation, or service location.
SUB-ZERO AND WOLF OFFER A CUSTOMISED DESIGN CHECK SERVICE to ensure your new appliances are installed perfectly. Please contact our Customer Care team for further information regarding our Design Check Service, or for detailed product specifications and installation advice.
Phone: 1300 808 859 Email: enquiries@subzero.com
Sub-Zero and Wolf Design Guides are also available via our website: www .subzero-wolf.com.au

Specifications are subject to change without notice.
This information was generated on July 25, 2022.
Verify specifications prior to finalizing your cabinetry/enclosures.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals