JBL GO 3 Portable Waterproof Speaker User Guide
- June 9, 2024
- JBL
Table of Contents
JBL GO 3 Portable Waterproof Speaker
WHAT’S IN THE BOX
Bluetooth pairing
Play
CHARGING
WATERPROOF DUSTPROOF IP67
SPEC TECH
| Transducer | 43 x 47 mm /1.5″ |
|---|---|
| Output power | 4.2WRMS |
| Frequency response: | 110 Hz -20 kHz |
| Signal-to-noise ratio | >85d8 |
| Battery type | Li-ion polymer 2.7 Wh |
| Battery charge time: | 2.5 hours (5 V = 1 A) |
| Music play time: | up to 5 hours (dependent on volume level and audio |
content)
Bluetooth® version:| 5.1
Bluetooth® profile:| A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range:| 2400 MHz- 2483.5 MHz
Bluetooth® transmitter power| >8 dBm (EIRP)
Bluetooth® transmitter modulation| GFSK, rr/4 DQPSK, 8DPSK
Dimensions (W x H x D)| 87.5 x 75 x41.3 mm/3.4×2.7 x1.6″
Weight| 0.209 kg/ 0.46 lbs
To protect battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Go 3 to liquids without removing cable connection. Do
not expose JBL Go 3 to water while charging. It may result in permanent damage
to the speaker or power source. After a liquid spill, do not charge your
speaker until it’s completely dry and clean. Charging when wet might damage
your speaker. When using an external adapter, the output voltage/ current of
the external adapter should not exceed SV /3A.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
www.harman.com/ru
tel. +7-800-700-0467
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>