JBL BAR 1000 Soundbar User Guide

Table of Contents

JBL-BAR-1000-Soundbar-product-image

Before using this product, read the safety sheet carefully.

To move the soundbar, first remove the two detachable speakers to avoid accidental damage.

The soundbar will pair with the two detachable speakers and the subwoofer automatically when they are powered on.

Sound Calibration
Optimize your 3D surround sound experience for your unique listening environment.

On an Android™ or iOS device, add the soundbar to your home Wi-Fi network through the JBL One app. Follow the app instructions to complete setup.

Model: BAR 1000 (soundbar unit)
BAR 1000 SURROUND (detachable speaker)
BAR 1000 SUB (subwoofer unit)
Sound system: 7.1.4 channel
Power supply: 100 – 240V AC, ~ 50/60Hz
Total speaker power output (Max @THD 1%): 880W
Soundbar output power (Max @THD 1%): 440W
Surround speaker output power(Max @THD 1%): 2x 70W
Subwoofer output power (Max. @THD 1%): 300W
Soundbar transducer: 5x (46×90)mm racetrack drivers, 3x 0.75” (20mm) tweeters, 2x 2.75” (70mm) up-firing full-range drivers
Surround speaker transducer: 0.75” (20mm) tweeter, 2.75” (70mm) up-firing full-range driver
Subwoofer transducer: 10” (260mm)
Networked standby power: < 2.0 W
Operating temperature: 0 °C – 45 °C
Lithium battery: 3.635V, 3283mAh
Detachable surround speaker playtime: up to 12 Hours (may vary according to content type and volume level)

HDMI video input: 3
HDMI video output (with Enhanced Audio Return Channel, eARC): 1
HDMI HDCP version: 2.3
HDR pass through: HDR10, Dolby Vision
Audio specification
Frequency response: 33Hz – 20kHz (-6dB)
Audio inputs: 1 Optical, Bluetooth, USB (USB playback is available in US version. For other versions, USB is for Service only.)

Bluetooth version: 5.0
Bluetooth profile: A2DP 1.2, AVRCP 1.5
Bluetooth transmitter frequency range: 2400 MHz – 2483.5 MHz
Bluetooth transmitter power: <15 dBm (EIRP)
Wi-Fi network: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)
2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4 GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
2.4G Wi-Fi transmitter power: <20 dBm (EIRP)
5G Wi-Fi transmitter frequency range:
5.15 – 5.35GHz, 5.470 – 5.725GHz, 5.725 – 5.825GHz
5G Wi-Fi transmitter power:
5.15 – 5.25GHz <23dBm,
5.25 – 5.35GHz & 5.470 – 5.725GHz <20dBm, 5.725 – 5.825GHz <14dBm (EIRP)
2.4G wireless transmitter frequency range: 2406 – 2474 MHz
2.4G wireless transmitter power: <10 dBm (EIRP)

Total soundbar dimensions (W x H x D): 1194 x 56 x 125 mm / 47” x 2.2” x 4.9”
Main soundbar dimensions (W x H x D): 884 x 56 x 125 mm / 34.8” x 2.2” x 4.9”
Detachable surround speaker dimensions (each) (W x H x D): 155 x 56 x 125 mm / 6.1” x 2.2” x 4.9”
Subwoofer dimensions (W x H x D): 305 x 440.4 x 305 mm / 12” x 17.3” x 12”
Soundbar weight: 3.72 kg / 8.2 lbs
Detachable surround speaker weight (each): 1.4kg / 3.1 lbs
Subwoofer weight: 10 kg / 22 lbs
Packaging dimensions (W x H x D): 1000 x 375 x 475 mm / 39.4” x 14.8” x 18.7”
Packaging Weight: 19.4 kg / 42.7 lbs

Information on power consumption
This equipment complies with European Commission Regulation (EC) No 1275/2008 and (EU) No 801/2013.
- Off: N/A
- Standby (when all wireless connections are deactivated): < 0.5 W
- Networked standby for Soundbar: < 2.0 W
The period of time after which the power management function switches the equipment automatically into:
If this equipment has the wireless network connections:
How to activate wireless network connections:
- Set up the equipment properly;
- Switch into wireless mode (Bluetooth, Chromecast built-in™, AirPlay 2 casting audio, Alexa Multi-Room Music & etc);
- Connect with energy using products (e.g. players/ game consoles/ STB (Set-Top Boxes)/ phones/ tablets /PCs).
  How to deactivate wireless network connections:
- Press and hold on the remote control for more than 5 seconds firstly;
- Then long press on the remote control for more than 5 seconds.