JBL Quantum 910X Wireless Gaming Headset for Xbox User Guide

: October 30, 2023
: JBL

JBL Quantum 910X Wireless Gaming Headset for Xbox

Product Information: JBL Quantum 910X Wireless for Xbox

The JBL Quantum 910X Wireless for Xbox is a high-performance gaming headset that provides an immersive gaming experience with its advanced features. The headset comes with JBL QuantumENGINE software that allows users to customize their audio settings, RGB lighting effects, and microphone side-tone. The headset also features JBL QuantumSPHERE 360 and JBL QuantumSPATIAL 360, which provides a 3D audio experience on compatible devices.

Software Requirements

Platform: Windows 10 (64 bit only) / Windows 11
500MB of free hard drive space for installation

System Compatibility
The JBL Quantum 910X Wireless for Xbox is compatible with the following devices:

PC
XboxTM
PlayStationTM
Nintendo SwitchTM
Mobile
MAC

What’s in the Box

USB-A to USB-C converter
Windshield foam for boom microphone
Calibration USB charging 3.5 MM AUDIO Microphone cable CABLE USB WIRELESS DONGLE
QSG | WARRANTY CARD | Safety Sheet OWNER’S MANUAL

Overview

The JBL Quantum 910X Wireless for Xbox features:

ANC/TALKTHRU LED and button
Game audio-chat balance dial
Volume control
Detachable windshield foam
Notification LED for mic mute/unmute
Microphone mute/unmute button
Charging LED
3.5 mm audio jack
USB-C port
Voice focus boom microphone
Spatial sound/head tracking control
Power on/off and Bluetooth pairing slider
RGB lighting zones
Flat-fold ear cup
2.4GHz pairing button

Calibration Microphone:

The calibration microphone can be set up by visiting JBL’s website for detailed instructions. The setup takes about 15-30 seconds.

Product Usage Instructions

Power On and Connect (Xbox):

Power on the headset.
For 2.4GHz wireless connection, connect the USB Type-A dongle to your Xbox and manually pair the headset with the dongle.

Power On and Connect (PC, Mac, etc.):

Power on the headset.
For 2.4GHz wireless connection, connect the USB Type-A dongle to your PC, Mac, laptop, PS5, or Nintendo SwitchTM. For devices without auto-switch, use the USB Type-C cable.

Bluetooth:

Access your device’s Bluetooth settings.
Select “JBL Quantum 910X” from the list of available devices.

JBL QuantumENGINE
Download JBL QuantumENGINE to gain full access to features on your JBL Quantum headsets – from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. JBLquantum.com/engine

Software requirements
Platform: Windows 10 (64 bit only) / Windows 11 500MB of free hard drive space for installation
*Always use the latest version of Windows 10 (64 bit) or Windows 11 for the most optimal experience on JBL QuantumENGINE

JBL QuantumSPHERE 360 available on Windows only. Software installation required.
JBL QuantumSPATIAL 360 Available on XBOX SERIES (X/S), XBOX ONE, Playstation™ (PS4/PS5) and Nintendo Switch

WHAT’S IN THE BOX

Requirements

Platform: Windows 10 (64 bit only) / Windows 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

OVERVIEW

ANC / TALKTHRU LED
ANC / TALKTHRU button
Game audio-chat balance dial
Volume Control
Detachable Windshield foam
Notification LED for mic mute / unmute
- Microphone Mute / unMute
CHARGING LED
3.5 mm Audio Jack
USB-C port
Voice Focus Boom Microphone
SPATIAL SOUND / head tracking control
Power on / off and Bluetooth pairing slider
POWER / 2.4GHz / Bluetooth LED
RGB Lighting Zones
Flat-fold ear cup
2.4GHz PAIRING BUTTON
Volume Control
MIC MUTE BUTTON

Calibration microphone

POWER ON & CONNECT (XBOX)

POWER ON & CONNECT (PC, mac ETC.)

Bluetooth

SETUP

BUTTON COMMAND JBL-Quantum-910X-Wireless-Gaming-Headset-for-Xbox-
fig-10

First time setup

10a Connect the headset to your PC via 2.4GHz USB wireless connection.
10b Go to “Sound Settings” -> “Sound Control Panel”.
10c* Under “Playback” highlight “JBL Quantum 910X Wireless For Xbox Game” and select “Set Default” -> “Default Device”.
10d Highlight “JBL Quantum 910X Wireless For Xbox Chat” and select “Set Default” -> “Default Communication Device”.
10e Under “Recording” highlight “JBL Quantum 910X Wireless For Xbox Chat” and select “Set Default” -> “Default Device”.
10f In your chat application select “JBL Quantum 910X Wireless For Xbox Chat” as the default audio device.
10G Follow the onscreen instructions to personalize your sound settings.
*If you have not installed JBL QuantumEngine, ensure to complete this step before enabling JBL QuantumSPATIAL 360.

MICROPHONE

JBL-Quantum-910X-Wireless-Gaming-Headset-for-Xbox-
fig-12

CHARGING

JBL-Quantum-910X-Wireless-Gaming-Headset-for-Xbox-
fig-13

LED BEHAVIOURS

TECH SPEC

Model: QUANTUM910X WIRELESS FOR XBOX
QUANTUM910XWIRELESSTM
Driver size: IRELESSTM 5
Frequency response (Passive): 20 Hz – 40 kHz
Frequency response (Active): 20 Hz – 20 kHz
Microphone frequency response: 100 Hz – 8 kHz
Max input power: 30 mW
Sensitivity: 113 dB SPL @1 kHz / 1 mW
Maximum SPL: 93 dB
Microphone sensitivity: -38 dBV / Pa @1 kHz
Impedance: 32 ohm
2.4GHz Wireless transmitter power: <11 dBm (headphone) <9dBm (dongle)
2.4GHz Wireless modulation: GFSK, π/4-DQPSK
2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
Bluetooth transmitted power: <12 dBm (EIRP)
Bluetooth transmitted modulation: GFSK, π/4-DQPSK
Bluetooth frequency: 2400 MHz – 2483.5 MHz
Bluetooth profile version: HFP: v1.8, A2DP: v1.3
Bluetooth version: BT Core: v5.2
Battery type: Li-ion battery (3.7 V / 1300 mAh)
Power supply: 5 V, 2 A
Charging time: 3.5 hrs
Music play time with BT+2.4GHz on and
ANC+RGB lighting off: Up to 34 hrs
Talk time with BT+2.4GHz on and ANC+RGB
lighting off: Up to 35 hrs
Music play time with only 2.4GHz on and
ANC+RGB lighting off: Up to 37 hrs
Talk time with only 2.4GHz on and ANC+RGB
lighting off: Up to 37 hrs
Music play time with only BT on and ANC+RGB
lighting off: Up to 42 hrs
Talk time with only BT on and ANC+RGB
lighting off: Up to 46 hrs
Microphone pickup pattern: Unidirectional
Weight: 420 g

JBL-Quantum-910X-Wireless-Gaming-Headset-for-Xbox-
fig-15

IC RF Exposure Information and Statement

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ910WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.14 W/Kg. The device was tested for typical head operations where the product was kept 0 mm from the head. To maintain compliance with IC RF
requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLQ910XWTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for body use is 0.39 W/Kg.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna. IC: 6132A-JBLQ910WL

Body operation
The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna. IC: 6132A-JBLQ910XWTM

WARNING
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Headphone : FCC ID: APIJBLQ910WL
IC: 6132A-JBLQ910WL
HVIN: Q910XW

DONGLE:
FCC ID: APIJBLQ910XWTM
IC: 6132A-JBLQ910XWTM
HVIN: Q910XWTM
product specifications and app screens are subject to change without notice.