MONSTER HUMA H4 Gaming Laptop User Guide
- June 9, 2024
- Monster
Table of Contents
HUMA
H4 **V5.1
STARTUP GUIDE**
Supplied Startup Guide
Welcome to the Monster Notebook Family. Below is the startup guide we have prepared for your new Huma.
-
Startup Guide
Please read this guide first. You can find basic information, including connecting accessories to your Huma, setting up Windows, and connecting your Huma to the Internet. -
Safety Guide/Recovery and Troubleshooting Guide
Please be sure to read this guide. You can find information that helps you use your Huma safely, including troubleshooting FAQs as well as instructions on recovering your Huma and creating recovery media.
Notes
- Features and apps mentioned in these startup guide may not be available or preinstalled, depending on the model of your Huma.
- With the latest Windows updates applied to your Huma, the operation procedures described in the startup guide may vary from the actual ones.
- The visual contents, such as illustrations, photos, and screenshots, used in the manual may look different from what you actually see on your Huma.
Monster Notebook Support Website
You can find the latest Huma support information.
When you need any help for using your Huma, visit our website first.
https://www.monsternotebook.com.tr/monster-cozum-merkezi/
European Union Regulatory Notices
Declaration of Conformity
Product bearing the CE marking comply with one or more of the following EU
directives as may be applicable.
- EMC Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- Radio Equipment Directive 2014/53/EU
- RoHS Directive 2011/65/EU
- Eco Design Directive 2009/125/EC
- Commission Regulation ErP 617/2013/EU
Products with Radio Functionality (EMF)
This product incorporates a radio transmitting and receiving device.
For computers and notebook computers in normal use, a separation distance of
20 cm ensures that radio frequency exposure levels comply with EU
requirements.
Products designed to be operated at closer proximities, such as tablet
computers, comply with applicable EU requirements in typical operating
positions.
Products can be operated without maintaining a separation distance unless
otherwise indicated in instructions specific to the product.
CONTENTS OF THE BOX
- AC adapter
- Startup Guide
- Warranty Book
- Safety Guide/Recovery and Troubleshooting Guide
- USB drive containing the drivers
Notes
- Keep the shipping box of your Huma until you make sure that you have all the supplied items. If you notice a missing or damaged product, before discarding the box contact our support specialists via our website.
- The supplied accessories were tested and found functional solely with your Huma.
CAUTION Hot surface
To avoid burn, do not use the computer on your lap for a long time.
LOCATING PARTS AND CONTROLS
Frontal View
1. Dual microphones | 7. Left/Right button |
---|---|
2. Camera LED Indicator | 8. LCD screen |
3. Camera | 9. Stereo speakers |
4. Camera cover | 10. Power button |
5. Touch Pad | 11. Keyboard |
6. Fingerprint Scanner |
Right Side View
- USB Type-C
- USB 3.1 Port
- USB 3.1 Port
- HDMI Output port
- Ethernet Port
Left Side View
- Kensington® Lock Port
- Charging Port
- Air Exhaust Vent
- USB 2.0 port
- SD Slot
- Headphone Jack
SETTING UP
-
Connect to a Power Outlet
Plug the AC adapter to the AC charging port on the Huma and connect the AC adapter and a power outlet with the supplied power cord.• Even when you do not intend to use your Huma for an extended period of time, connect it to a power outlet at least every three months and charge the battery to around 50% of capacity. If the computer is kept unplugged from a power outlet for an extended period of time, the battery voltage will drop due to self-discharge to trigger the safety function and the battery may become unavailable for use. The time period before the safety function is triggered varies depending on the ambient temperature. -
Turn On Your Huma
Lift the LCD screen lid and press the **power button on the computer. Notes**
• When lifting the LCD screen lid, do not grasp the area around the camera as it will cause malfunctions.
• Do not turn off your Huma before the Windows Setup window appears. -
Set Up Windows (Initial Setup)
Follow the instructions displayed on the Windows Setup window to make initial settings.
Note
Please refer to Windows Help or Microsoft’s website for more details.
TIPS
Connect to the Internet
With your Huma, you can connect to the Internet either via a Wi-Fi
{wireless LAN) or wired LAN network. Before connecting to the Internet, you
need to select a connection service, make a contract with an Internet service
provider accordingly, and make the Internet connection settings on the
computer. For detailed information on the Internet connection settings and
required network devices, refer to the manual from your service provider and
the manual that came with your device. Establishing a successful connection to
the Internet completes Windows license authentication.
Connecting via a Wi-Fi network
- Select (start), (Settings), Network & Internet, and Wi-Fi, and then set Wi-Fi to On.
- Select Show available networks.
- Select the desired Wi-Fi access point, and then select Connect.
Connecting via a Wired LAN network
- Plug one end of a LAN cable {not supplied) to the . Ethernet port on your Huma and the other to your modem/router.
Running Windows Update
- Select (start), (Settings), and Windows Update, and then follow the on-screen instructions to update the Windows.
Updating Huma’s Software
The USB drive included in the box contains all the drivers you need.
However, please visit https://www.monsternotebook.com.tr/suruculer/ for the
latest versions of the drivers.
Creating your own recovery media
Your Huma does not come with any recovery media.
Be sure to create your own recovery media with a USB flash drive before you
first use the computer following your purchase. For more information, refer to
the Safety Guide/ Recovery and Troubleshooting Guide.
Note
Always be sure to use the AC adapter to connect your Huma to a power outlet
before doing a recovery.
Turning off or placing your Huma into Sleep mode
Upon completion of the Windows setup, select (start), ****(Power}, and then
Shut down or Sleep.
USING THE FINGERPRINT SENSOR
You can use the fingerprint sensor to access the Windows Hello functions.
The Windows Hello functions include signing in with fingerprint authentication
instead of password, to the Windows user account for which you have enrolled
your fingerprint .
For more information about the functions and setup of Windows Hello, refer to
the Windows Hello help.
Enrolling your fingerprint Follow these steps to set up Windows Hello and
enroll your fingerprint.
- Select (start), (Settings), and Accounts.
- Select Sign-in options and set your password. If you have already set your password, proceed to step 3.
- Follow the on-screen instructions for each fingerprint authentication to enroll your fingerprint. If you have not set a PIN, set it at the end of the procedure.
Notes
-
The fingerprint authentication technology does not assure complete verification of personal identity, nor do they guarantee absolute protection of your data and hardware. Monster Notebook assumes no liabilities arising out of your use of or inability to use the fingerprint sensor.
-
The fingerprint recognition rate varies depending on your use of the fingerprint sensor.
They are not consistent among individuals as well. -
Keep the fingerprint sensor clean to prevent failures or malfunctions.
-
Please be aware that your enrolled data for fingerprint authentication and face recognition may be erased in the course of repair work to your Huma.
-
When you enroll fingerprints, be sure to enroll more than one finger, in case of injuries.
-
Depending on the state of your fingerprint or your use of the fingerprint sensor, enrollment or authentication of the fingerprint may fail. When fingerprint authentication fails, try the following:
- Use another finger.
- Clean the finger.
- Delete the fingerprint already enrolled, and then enroll it once again.
- During a dry season, such as winter, be sure to touch a metal object to discharge static electricity from your body before scanning your fingerprint. Static electricity may cause malfunctions of the fingerprint sensor.
References
- Monster Notebook | Performans Tutkunlarına Özel Notebook'lar
- Monster Çözüm Merkezi
- Monster Notebook | Performans Tutkunlarına Özel Notebook'lar
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>