hama 00095820 Full Motion Monitor Arm Instruction Manual

00095820
Monitor Arm
Operating Instructions

Required tools

Installation kit

Operating instruction

Thank you for choosing the Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• Monitor Arm
• Installation kit (see contents, Fig. 1)
• These operating instructions

Note
Please check that the installation kit is complete before installing the product and ensure that none of the parts are faulty or damaged.

Safety Notes

Warning

• Given the multitude of terminal devices, the supplied mounting kit is unable to cover every option.
• In a few cases, the screws for attaching the terminal device to the product are too long.
• Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialized dealer.
• Never apply force during mounting. This can damage your terminal device or the product.
• If in doubt, have this product mounted by a qualified technician -do not attempt to mount it yourself!
• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
• You should repeat this check at regular intervals (at least every three months).
• When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no-load exceeding the maximum permitted dimensions is attached.
• Make sure that the product is loaded symmetrically.
• During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.
• Maintain the necessary safety clearance around the attached load (depending on the model).
• In the event of damage to the product, remove the attached load and stop using the product.

Intended use and specifications

• The product is used for mounting flat panel displays for private household use.
• The product is intended for indoor use only.
• Only use the product for the intended purpose.

Installation requirements and installation

Note

• Only mount the product with the help of a second person. Get the support and help you need.
• Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
• The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be leftover, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product).
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1a ff.).

Note

• Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
• Please ensure that the bracket lays flat and evenly on the back of the monitor.
• Ensure that all screws have the proper length and can be mounted until they are hand-tight (see Fig. 3, 4).

Setting and maintenance

Warning

• Always adjust the product with the help of asecond person. Get the support and help you need.
• The spring rate must be set precisely based on the weight of the screen.
• The setting must be made when the screen is already installed.
• Screws do not have to be loosened for lateral movement.
• The tilting resistance can be adjusted using the screws on the front joint of the monitor plate (see Figure5).

Note

• If the screen is too light for the current setting, the carrying arm will automatically move upward. This means that the spring rate must be reduced by turning the locking screw in the (-) direction.
• If the carrying arm automatically moves downward, the spring rate must be increased (+).
• Only adjust the gas springs when the carrying arm is completely lowered.
• To adjust the spring rate, use the Allen key (C2) to turn the locking screw in the appropriately marked direction (+) or (-) while the carrying arm is completely lowered. (Fig. 5) • After adjusting the spring rate, check whether the carrying arm with the installed load remains in various positions, or automatically moves up or down. If necessary, repeat the adjustment process while the carrying arm is completely lowered.
• Depending on the weight of the screen, an adjustment may take up to 40 full rotations of the locking screw. Do not overtighten the locking screw (screw suddenly becomes difficult to move).
• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.
• You should repeat this check at regular intervals (at least every three months).
• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>