BriTeQ BT-Theatre 60FCL LED Lens Spotlight User Manual

BriTeQ BT-Theatre 60FCL LED Lens Spotlight

FEATURES

• Stylish full color LED theater spot with manual 17° ~ 40° zoom.
• Thanks to its attractive looks this projector is perfect for use in clubs, exhibition booths, rental, …
• Four-leaf barndoor included
• No more heavy and expensive dimmer packs needed!
• Thanks to the 60W RGBL LED, you can create rich colors and excellent white tints with a high CRI >87.
• Different color presets, including white with different CCT: 2700K, 3000K, 3200K, 4000K, 5600K.
• Low noise, temperature controlled, cooling fan
• Extruded black anodized aluminium housing with strong bracket
• LCD-display to select different working modes:
• Standalone (master) Mode : set dimmer + strobe (if needed)
• Master/slave mode: connect several projectors together, the first projector controls the others.
• DMX-controlled: 6 different channel modes for maximum flexibility.
• Selectable lamp behavior: halogen lamp (slow) or led (fast)
• Four dimmer curves: linear, square, inverse square, S-curve
• In case of DMX failure you can choose between blackout and freeze mode.
• RDM-functionality for easy remote setup: DMX addressing, channel mode, …
• Lock function to avoid unwanted altering of the settings.
• White balance adjustment to perfectly match the colors of several projectors.
• Default factory settings + user settings can be saved/loaded.
• 3pin DMX in/outputs and fixed 1m power cord with standard mains plug (CEE 7/7)

BEFORE USE

• Before you start using this unit, please check if there’s no transportation damage. Should there be any, do not use the device and consult your dealer first.
• Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual.
• Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.

Check the contents:
Check that the carton contains the following items:

• English operating instructions, other languages can be downloaded from our website.
• BT-THEATRE 60FCL
• Four leaf barndoor

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only.

• The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance.
• This symbol means: indoor use only
• This symbol means: Read instructions
• This symbol determines: the minimum distance from lighted objects. The minimum distance between light-output and the illuminated surface must be more than 1 meters

CAUTION: Do not stare at operating lamp. May be harmful to the eyes.

• To protect the environment, please try to recycle the packing material as much as possible.
• To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
• To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages.
• This unit is for indoor use only.
• Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object enters the unit, immediately disconnect the mains power.
• Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls.
• Don’t cover any ventilation openings as this may result in overheating.
• Prevent use in dusty environments and clean the unit regularly.
• Keep the unit away from children.
• Inexperienced persons should not operate this device.
• Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.
• Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
• Allow the device about 10 minutes to cool down before to start servicing.
• Always unplug the unit when it is not used for a longer time or before to start servicing.
• The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country.
• Check that the available voltage is not higher than the one stated on the unit.
• The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Never let the power-cord come into contact with other cables!
• This fixture must be earthed in order to comply with safety regulations.
• Don’t connect the unit to any dimmer pack.
• Always use an appropriate and certified safety cable when installing the unit.
• In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user serviceable parts inside.
• Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type and electrical specifications!
• In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
• The housing and the lenses must be replaced if they are visibly damaged.
• Please use the original packing when the device is to be transported.
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy.

DESCRIPTION

1. MAINS INPUT: 1m power cord with standard CEE 7/7 mains plug.
2. MAINS FUSE: protects the unit in case of electrical problems, always use the prescribed fuse!
3. DMX IN: used to daisy chain the projector with other units that will be controlled by a DMX-controller. The DMX-input is also used to update the firmware of the projector, see the upgrade instructions on our website.
4. DMX OUT: used to daisy chain the projector with other units that will be controlled by a DMX-controller.
5. DISPLAY: shows the various menus and the selected functions:
6. MENU-button: used to browse the different menu options or to exit a menu option.
7. ENTER-button: used to select a menu option or confirm a setting.
8. ▲-button: used to go to the previous menu option or to increase a parameter value.
9. ▼-button: used to go to the next menu option or to decrease a parameter value.
10. SAFETY EYE: used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”.
11. FOCUS KNOB: used to adjust the beam angle between 10° and 50°.
12. HANGING BRACKET: with a knob on both sides to fasten the unit in the desired position. you can use the hole in the center of the bracket to fix a hook or truss clamp.
13. LOCKING CLIP: The clip is used to keep the barn door and color frame in place. Press the clip aside to open it.
14. BARN DOORS: they facilitate shaping of the beam of light from the fixture, and prevent the distinctive scatter of light created by the Fresnel lens from spilling into areas where it is not wanted, such as the eyes of audience members. Just rotate the barndoor leafs in the desired position.

OVERHEAD RIGGING

Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property. Overhead rigging requires extensive experience! Working load limits should be respected, certified installation materials should be used, the installed device should be inspected regularly for safety.

• Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
• Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The fixture must be fixed at least 50cm from surrounding walls.
• The device should be installed out of reach of people and outside areas where persons may walk by or be seated.
• Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s weight.
• Always use a certified safety cable that can hold 12times the weight of the device when installing the unit. This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails.
• The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
• Don’t cover any ventilation openings as this may result in overheating.
• The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. The installations should be inspected every year by a skilled person to be sure that safety is still optimal.

SETUP MENU / HOW TO SETUP

With the setup menu you can fully configure the projector. All settings are preserved when the unit is disconnected from the mains.

• To select any of the functions, press the MODE button until the required function is shown on the display or use the ▲/▼buttons to browse the menu.
• Select the function with the ENTER button.
• Use ▲/▼buttons to change the values.
• Once the required value is selected, press the ENTER button to confirm.

DMX ADDR
Used to set the desired DMX-address.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the DMX value can now be changed
• Use ▲/▼buttons to select the desired DMX512 address. The last occupied DMX-address is also shown: this makes it easier to set the address of the next unit in the chain.
• Once the correct address shows on the display, press the ENTER button to save it.
  Note: on RDM-compatible controllers this option can also be remotely set.

CHANNEL MODE
Used to set the desired channel mode.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to select the desired mode:
  • 4CH RGB+DIM: R+G+B can be set separately, with combined strobe + master dimmer on CH4.
  • 4CH RGBL: R+G+B+W can be set separately (no master dimmer or strobe)
  • 5CH RGBL+DIM: R+G+B+W can be set separately, with combined strobe + master dimmer on CH5.
  • 6CH: R+G+B+L can be set separately, with separate master dim & combined strobe/sound channels.
  • 6CH+: R+G+B+L can be set separately, with separate master dim & strobe channels.
  • 7CH: R+G+B+L can be set separately, with separate master dim, effect & strobe channels
• Once the correct option shows on the display, press the ENTER button to save it.
  Remark: on RDM-compatible controllers this option can also be remotely set.

SLAVE MODE
Used to set the projector as slave in a master/slave setup.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button

SOUND SENS MODE
Used to set sensitivity of the internal microphone, so the projector reacts in the best condition when in sound controlled mode.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the sensitivity SENS can now be changed
• Use ▲/▼buttons to select the desired sensitivity. (00 = lowest sensitivity, 31=highest sensitivity)
• Press the ENTER button to confirm your settings

AUTO RUN
Used to run all the internal automatic programs automatically.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Use ▲/▼buttons to select the desired SP playback speed from 01 (very slow) to 99 (fast).
• Once the correct value is shown on the display you have to press the ENTER button to confirm.
• Use ▲/▼buttons to select the desired R Repetitions from 0 (NO repetitions) to 99.
• Once the correct value is shown on the display, press the ENTER button to save it.

EFFECT MODE
Used to set the desired effect mode while used as master.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• After 1 second, the last selected effect will start running. The name of the effect is now written on the display
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to selected the desired mode:
  • COL.CH04 (COLOR CHANGE 4) 4 colors change automatically without fading.
  • COL.CH15 (COLOR CHANGE 15) 15 colors change automatically without fading.
  • COL.FADE (COLOR FADE) colors change with a nice fading effect.
• Once the desired option is shown on the display you have to press the ENTER button to confirm.
• Use ▲/▼buttons to select the desired SP playback speed from 01 (very slow) to 99 (fast).
• Once the correct value is shown on the display you have to press the ENTER button to confirm.
• Use ▲/▼buttons to select the desired F strobe speed from 00 (NO strobe) to 99 (fast).
• Once the correct value is shown on the display, press the ENTER button to save it.

STATIC COLOR MODE
Used to set the desired fixed color while used standalone without controller or as master in a master/slave configuration : 5 WHITE CCT-presets + 7 color presets + 1 custom color.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use DOWN and UP buttons to selected the desired color:
  • WW 2700K warm white 2700K (extra warm and cosy: perfect for homes, pubs, …)
  • WW 3000K warm white 3000K (warm and cosy: perfect for homes, pubs, …)
  • WW 3200K warm white 3200K (perfect for homes, small theatres, pubs, shops, …)
  • NW 4000K natural white 4000K (perfect for exhibition stands, shops, museums, …)
  • CW 5600K cold white 5600K (perfect for juwelry shops, …)
  • RED
  • ORANGE
  • YELLOW
  • GREEN
  • CYAN
  • BLUE
  • PURPLE
• SET this is a color that can be set by the user. Follow these steps:
  • Press the ENTER button: the display shows the value (000-255) for RED. (use ▲/▼buttons)
  • Press the ENTER button: the display shows the value (000-255) for GREEN. (use ▲/▼buttons)
  • Press the ENTER button: the display shows the value (000-255) for BLUE. (use ▲/▼buttons)
  • Press the ENTER button: the display shows the value (000-255) for LIME. (use ▲/▼buttons)
• Press the ENTER button to save your setting.

MASTER DIM
Used to set the master dimmer while used as master.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to select the desired level for the master dimmer. (please note that the last selected static color will be used to set the value)
• Once you have the desired level, press the ENTER button to save it.
  Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.

WHITE BALANCE
Used to set the white balance or to perfectly match the colors of several projectors.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the display shows the value (050-255) for RED. (change with ▲/▼buttons)
• Press the ENTER button: the display shows the value (050-255) for GREEN. (change with ▲/▼buttons)
• Press the ENTER button: the display shows the value (050-255) for BLUE. (change with ▲/▼buttons)
• Press the ENTER button: the display shows the value (050-255) for LIME. (change with ▲/▼buttons)
• Once you have set the desired levels, press the ENTER button to save them.
  Note: the setting of this option affects all color settings, static colors and DMX-controlled colors.

DIMMER CURVE
Used to set the dimmer curve of the master dimmer.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to selected the desired curve:
•  Once you have the desired curve, press the ENTER button to save it.

LAMP BEHAVIOR
Used to select the reaction time of the projector.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to select the desired mode:
  • LED The projector follows the instructions instantly, no delay.
  • HALOGEN The projector imitates the behavior of a halogen lamp (slower reaction time).
• Once the correct option shows on the display, press the ENTER button to save it.

FAN SPEED
Used to set the fan working mode.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to select the desired mode:
  • AUTO Temperature controlled with the focus on maintaining highest possible light output.
  • STILL Temperature controlled with the focus on low fan noise (reduced light output when needed).
• Once the correct option shows on the display, press the ENTER button to save it.

LED TEMPERATURE
Shows the actual LED temperature.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.

LOCKING MENU
Used to lock the setup menu against unwanted altering of the settings.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.

• Press the ENTER button: the values can be changed

• Use ▲/▼buttons to select the desired mode:

  • OFF The setup menu can be used at any time.
  • ON After a short time the setup menu locks automatically, the display shows LOCKED *****.
    Unlock the display by pressing the buttons in this order: UP, DOWN, UP, DOWN, ENTER.

• Once the correct option shows on the display, press the ENTER button to save it.

NO DMX BEHAVIOR
Used to set how the projector reacts when the DMX-signal suddenly disappears.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to select the desired mode:
  • BLACKOUT output turns black while no DMX is detected.
  • FREEZE: output based on the last valid DMX-signal is kept on the projector.
• Once the correct option shows on the display, press the ENTER button to save it.
  Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled.

DEFAULT SETTINGS
This is your emergency exit if you really messed up the settings: just return to factory settings. Also 2 user settings can be saved/loaded.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.
• Press the ENTER button: the values can be changed
• Use ▲/▼buttons to selected the desired settings:
  • FACTORY
  • USER1
  • USER2
• Press the ENTER button:
  • FACTORY was selected: the display shows LOAD
  • Press the ENTER button: the display shows ACTION?
  • Use ▲/▼buttons to select YES / NO
  • Press the ENTER button to confirm.
  • USER1 / USER2 was selected:
  • Use ▲/▼buttons to select LOAD / SAVE
  • Press the ENTER button to confirm: the display shows ACTION?
  • Use ▲/▼buttons to select YES / NO
  • Press the ENTER button to confirm.
  • SAVE was selected: the current settings of the setup menu are saved to memory.
  • LOAD was selected: the previously saved settings are loaded.

Default factory settings:

PARAMETER name| Defaults factory| USER defaults 1| USER defaults 2
---|---|---|---
DMX Channel mode| 6CH| Current setting in the menu| Current setting in the menu
SOUND MODE sensitivity| SENS:25| Current setting in the menu| Current setting in the menu
AUTO RUN Chase repeat| SP=50 R=3| Current setting in the menu| Current setting in the menu
EFFECT MODE| CFADE SP50 F00| Current setting in the menu| Current setting in the menu
CUSTOM Static color| WW 2700K| Current custom color settings| Current custom color settings
MASTER DIM| 100%| Current setting in the menu| Current setting in the menu
WHITE BALANCE| RGBL = 255| Current white balance settings| Current white balance settings
DIM Curve| SQUARE| Current setting in the menu| Current setting in the menu
LED behavior| HALOGEN| Current setting in the menu| Current setting in the menu
FANSPEED| AUTO| Current setting in the menu| Current setting in the menu
Auto Lock Menu| OFF| Current setting in the menu| Current setting in the menu
No DMX mode| FREEZE| Current setting in the menu| Current setting in the menu

FIRMWARE VERSION
Used to show the current version of the firmware.

• Press the MENU button or ▲/▼buttons until the desired function is showing on the display.

The firmware of this unit can be upgraded using a special upgrade tool with Windows® software. (separately available from Briteq).
Each time the projector is switched on, the display shows “UPDATE Wait ….”: while this message shows on the display you can start the update using our special upgrade tool. More information about this can be found in the user manual of the upgrade tool and / or our website: www.briteq- lighting.com

ELECTRICAL INSTALLATION

Important: The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country.

Master / Slave mode:
Connect the projectors together as shown on the drawing. Please refer to the paragraph “SETUP MENU” to setup the master. All slaves must be set to SLAVE- mode.
IMPORTANT: make sure that no DMX-controller is connected, this will result in unexpected behavior!

Electrical installation for two or more units in DMX-mode:

• The DMX-protocol is a widely used high speed signal to control intelligent light equipment. You need to “daisy chain” your DMX controller and all the connected units.
• Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+)
• To prevent strange behavior of the light effects, due to interferences, you must use a 90Ω to 120Ω terminator at the end of the chain. Never use Y-splitter cables, this simply won’t work!
• Make sure that all units are connected to the mains.
• Each unit in the chain needs to have its proper starting address so it knows which commands from the controller it has to decode.

RDM FUNCTIONS / REMOTE SETUP

RDM means “Remote Device Management”. This projector works with a brief set of RDM-functions which means that it can setup a bi-directional communication with an RDM-compatible DMX-controller. Some of these functions are briefly explained below, others will be added in the future.

• The DMX-controller sends out a “discovery command”, all RDM devices respond and send their unique device ID.
• The DMX-controller asks each RDM device for some basic data so it knows which devices are connected. The projector will respond:
  • Device name: BT-THEATRE 60FCL
  • Manufacturer: Briteq®
  • Category: LED Dimmer
  • Firmware: x.x.x.x (firmware version of the projector)
  • DMX address: xxx (current DMX start address of the projector)
  • DMX footprint: xx (number of DMX-channels used by the projector)
  • Personality: xx (current personality or DMX-working mode used by the projectors)
• The DMX-controller can send certain commands to each RDM device which allow remote setup of the units. Thanks to this the projector can be setup remotely.

The following functions can be managed remotely:
No more need to take a ladder and set all units one by one!

• DMX START ADDRESS: The start address can be set remotely from 001 to xxx.
• PERSONALITY: The DMX working mode (DMX-chart) can be set remotely.

These 2 functions make it possible to prepare a complete DMX-patch of all projectors on the DMX-controller and send these data to all projectors at once. More functions will be added later.

OPERATING INSTRUCTIONS

Note: when the projector is switched on the display shows “UPDATE WAIT …” This message informs you that IF you want to upgrade the firmware, you should do it while this message is shown on the display. For normal use you can ignore this message completely.

• A. Standalone 1unit:
  • Just connect the projector to the mains.
  • Select one of the standalone options, AUTO RUN EFF MODE or STATIC COLOR
  • Adjust the master dimmer MASTER DIM if necessary
  • Refer to chapter HOW TO SETUP to learn how to set the menu options.
• B. Two or more units in master/slave setup:
  • Connect the units together. Refer to the chapter “electrical installation” to learn how to do this.
  • Select one of the standalone options, AUTO RUN EFF MODE or STATIC COLOR in the first projector of the chain. This “Master” unit will send all the information to the slave units. This means all the main program settings need to be done in this “Master” unit.
  • Adjust the master dimmer MASTER DIM if necessary
  • Set all the other projectors in SLAVE mode
  • The slave projectors will now follow the settings of the master projector so they all work synchronously.
• C. Controlled by universal DMX-controller:
  • Connect all units together. Refer to the chapter “Electrical installation for two or more units in DMX-mode” to learn how to do this (don’t forget to address all units properly!)
  • Connect all units to the mains and turn on the DMX controller. Since each unit has its own DMX-address, you can control them individually. Remember that each unit can use a different number DMX-channels, depending on the DMX-mode you have selected in the menu. See the different DMX charts:

04CH RGB+DIM channel DMX-Mode: RGB + MASTER / DIM / SOUND / STROBE

04CH RGBL channel DMX-Mode: RGBL

05CH RGBL+DIM channel DMX-Mode: RGBL + MASTER/DIM/SOUND/STROBE

06CH DMX-Mode: RGBL + MASTER DIM + SOUND/STROBE

06CH+ DMX-Mode: RGBL + MASTER DIM + STROBE

07CH DMX-Mode: MASTER DIM + STROBE + COLOR MACROS + RGBL

MAINTENANCE

• Make sure the area below the installation place is free from unwanted persons during servicing.
• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.

During inspection the following points should be checked:

• All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation.
• When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
• The mains cables must be in impeccable condition and should be replaced immediately when even a small problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit’s optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
  Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

This unit is radio interference suppressed. This product meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer.

• Mains Input: AC 100 – 240V, 50/60Hz
• Power consumption: 62 Watt (4 colors @ 100%)
• Power connections: Power cord, 1m.
• DMX connections: 3pin-XLR male/female
• Lamp: LED, 60W RGBL (1pc)
• Beam Angle: manual zoom 17° ~ 40°
• IP-Rating: IP20
• Size: 241 x 196 x 173 mm (without barndoor)
• Weight: 3.6 kg

The information might be modified without prior notice You can download the latest version of this user manual on our website: www.briteq- lighting.com

www.BRITEQ-LIGHTING.COM

Other languages can be downloaded from: WWW.BRITEQ-LIGHTING.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>