LYRIDZ A5136 Motion Sensor Under Cabinet Light User Guide

CabinetLight2
Please retain this document for future reference

Installation Method

1. Clean the installation position.
2. Stick the loop side to the hook side, and tear off the protective film on the back of the loop side.
3. Stick the cabinet light somewhere by pushing firmly for at least 1 minute.

Notice:
Once the hook side and loop side are attached, please do not remove it. Otherwise, itis hard o stick it on the. wall.

Specifications

Important Safety Information

To ensure correct and safe installation, function of the product, please follow below instructions and keep this booklet for future reference.

• Do not use light around water. Avoid liquids on all electrical parts.
• Clean only with a dry, soft cloth. Household cleaners or solvents can damage your light.
• Do notinstall your light near any heat sources, such as radiators, heat registers, stoves, or any other apparalus that produces heat.
• Do not block any ventilation openings
• To reduce the risk of fire or eleciric shock, do not expose this light to rain or moisture,
• Keep packaging materials(e.g plastic bags)out of children’s reach.
• Not suitable for chidren under 36 months. Small parts has choking hazard.
• Do not stare at the operating light source.

GettoKnow Your LYRIDZ

Light Button
Press once to swich between 5 preset brightness.
Long press to switch brightness steplessly.
Four Modes

• OFF: Always light off
• ON : Always light up
• 24H-AUTO: Detects motion to tum on all day. Last about 30secs.
• Night-AUTO: Detects motion to turn on in dark enough condition.
  Last about 30secs.

Charge the Cabinet Light

Tip:
When the battery is low, the cabinet light will flash.

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient of relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an oulet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
This LYRIDZ smart cabinetlight is fully compliant with the EU, CA JP, UK and USAlegislation. When disposing this equipment, please help protect our environment by means of proper disposal. Your local authorities will have special return and disposal facilities available for you.
‘AN ICES-3(B)INMB-3(8)
Made inChina
Model: A5136
Linkfar Healthcare GmbHNiederrheinstrafe
71, 40474 Dusseldorf Germany
Sea&Mew Accounting Ltd
10 Duke Street, Coventry CV5 8BZ

Customer Service
12-month limited warranty
 lifetime technical support
support@lyridz.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>