Lyridz A5215 Motion Sensor Table Lamp 1 User Manual
- June 15, 2024
- LYRIDZ
Table of Contents
Lyridz A5215 Motion Sensor Table Lamp 1
Get To Know Your LYRIDZ
Touch Control Area
- Tap once to turn on or off the light.
- Touch and hold to turn on or off the color-flowing mode when the light is on.
Indicator Light
- Flash Blue: Charging
- Flash Red: Low battery
- Solid Green : Timing
Color Switching
- Press once to switch between
- Prong press steplessly to switch colors.
Dimming
- Press once to switch between 5 preset brightness.
- Long press steplessly to switch brightness.
Timing Off
- Press once to turn on or off the 1-hour auto-off function.
Hanging Hole
-
Power On/Off
Press and hold for 1.5 seconds to turn on or off the power source. -
Motion Sensor On/Off
Press twice within 0.5 seconds to switch between 30s auto-off mode and constant lighting mode when the main lights up.
3 Steps To Use Your LYRIDZ
-
Step 1:
Full Charge -
Step 2:
Press and hold the Power On/Off Button for 1.5 seconds to power on the device. -
Step 3:
Tap the top to turn on the light
Specifications
Important Safety Information
To ensure the correct and safe installation and function of the product, please follow the below instructions and keep this booklet for future reference.
- Do not use light around the water. Avoid liquids on all electrical parts.
- Clean only with a dry, soft cloth. Household cleaners or solvents can damage your light.
- Do not install your light near any heat sources, such as radiators, heat registers, stoves, or any other apparatus that produces heat.
- Do not block any ventilation openings.
- To reduce the risk of fire or electric shock, do not expose this light to rain or moisture.
- Keep packaging materialize.g. plastic bags) out of children’s reach.
- Not suitable for children under 36 months. Small parts have choking hazards.
- Do not stare at the operating light source.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This LYRIDZ motion sensor table lamp is fully compliant with the EU, CA, JP, UK, and USA legislation. When disposing of this equipment, please protect our environment by means of proper disposal. Your local authorities will have special return and disposal facilities available for you. CAN ICES-3(B)/NMB-3(B)
Made in China
Model : A5215
Linkfar Healthcare GmbHNiederrheinstraße 71, 40474 Düsseldorf Germany
Sea&Mew Accounting Ltd 10 Duke Street, Coventry CV5 8BZ
Customer Service
- 8 12-month limited warranty
- lifetime technical support
- support@lyridz.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>