Lyridz 150 Night Light Plug Wall User Manual
- June 15, 2024
- LYRIDZ
Table of Contents
**Lyridz 150 Night Light Plug Wall User Manual
**
Operating Principles
- AUTO mode: Auto turns on when motion is detected in the dark and off in a preset auto-off time of no motion detected.
- ON mode: Constant lighting.
- OFF mode: Light staying off.
Influencing Factors
Sensing angle & temperature
If a movement route is like photo A, sensor will be more sensitive than that
in photo B.
Under what circumstances does it make it difficult for Sensor to react to motion?
If the light is installed too low from the floor, it will affectits sensing range. We recommend that the installed height is at least 15.7inch/40cm.
If both lights are installed too close, they will interfere with each other.
Sensor in position Ais more sensitive than thatin position B.”
Troubleshooting
| Problem | Possible Causes | Remedies |
|---|---|---|
| Stay on/ can’t turn off | In ON mode | Switch to auto mode |
| There are other heat sources OR air outlets around the light | Install the |
light in another place without heat sources OR air outlets to test it again
Lights off / insensitive in AUTO mode| In a bright environment| Please
make sure the environment is in the dark while the light is in AUTO mode
The motion is not within the sensing range| Please refer to Page 1
Sensor covers dust| Please useadryploth with alcohol to clean it
There is no temperature difference around the light| Sensor works by detecting
heat energy in the surrounding environment
There are other electrical devices, like monitors|
- Unplug the light and switch itto auto mode
- Plug itin and cover the whole light with a cloth
- Tap the detector and the light will be on
- The light will automatically turn off after a preset time
In AUTO mode, the light stays on even if other lights are turned on| The light detects your motion all the time| Please make sure your motion is out of sensing range