JBL Xtreme 2 Portable Bluetooth Speaker User Guide

June 9, 2024
JBL

Xtreme 2 Portable Bluetooth Speaker
User GuideJBL Xtreme 2 Portable Bluetooth Speaker

What’s in the box

  JBL Xtreme 2 Portable Bluetooth Speaker - fig 1

Button

JBL Xtreme 2 Portable Bluetooth Speaker - fig
2

Connections

JBL Xtreme 2 Portable Bluetooth Speaker - fig 3

Bluetooth®

Bluetooth connection JBL Xtreme 2 Portable Bluetooth Speaker - fig
4

Music control

JBL Xtreme 2 Portable Bluetooth Speaker - fig 5

Speakerphone

JBL Xtreme 2 Portable Bluetooth Speaker - fig 6

Voice assistant
Tap “Voice Assistant” in the JBL Connect app, to make the “ ****” button as the activation key of Sid or Google Now on your phone.

Press the ” ****” button on the speaker to activate Sid or Google Now on your phone. Please make sure the Sid or Google Now is enabled on your phone.JBL
Xtreme 2 Portable Bluetooth Speaker - fig 8

JBL Connect+

Wirelessly links more than 100 pcs JBL Connect+ compatible speakers together.

Step 1

JBL Xtreme 2 Portable Bluetooth Speaker - fig 9 Step 2

JBL Xtreme 2 Portable Bluetooth Speaker - fig 10 Play music on one of your JBL speakers and then press the JBL Connect+ button on all desired speakers to start pairing. All the other JBL speakers will play same music from the music source. JBL Xtreme 2 Portable Bluetooth Speaker -
fig 11Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming. JBL Xtreme 2
Portable Bluetooth Speaker - fig 12

LED Behavior

JBL Xtreme 2 Portable Bluetooth Speaker - fig 13

Warning

JBL Xtreme 2 Portable Bluetooth Speaker - fig 14 JBL Xtreme 2 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Xtreme 2 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Xtreme 2 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Xtreme 2 to water while charging, as doing so may result in permanent damage to the speaker or power source. IPX7 waterproof is defined as the speaker can be immersed in water up to 1 m for up to 30 minutes.
If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

  • Bluetooth® version: 4.2
  • Support: A2DP V1.3, AVRCP V1.6, HFP V1.61 HSP V1.2
  • Transducer: Woofer 2 x 2.75 inch
  • Tweeter: 2 x 20 mm
  • Rated power: 2 x 20W RMS Bi-amp (AC mode)
  • Frequency response: 55Hz-20kHz
  • Signal-to-noise ratio: >80dB
  • Power supply: 19V 3A
  • Battery type: Lithium-ion Polymer 36Wh (Equivalent to 3.7V10000mAh)
  • Battery charge time: 3.5hours
  • Music play time: up to 15 hours (varies by volume level and audio content)
  • USB charge out: 5V / 2A (maximum)
  • Bluetooth® transmitter power: 0-12.5 dBm
  • Bluetooth® transmitter frequency range. 2.402 — 2.480 GHz
  • Bluetooth® transmitter modulation: GFSK, n/4 DQPSK, 8DPSK
  • Dimension (H x W x D): 136 x 288 x 132 mm
  • Weight: 2393g

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries,  Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals