THOMSON ANT1528BK HD Indoor Antenna Instruction Manual

June 9, 2024
THOMSON

HD indoor antenna

Antenne d’intérieur HD

HD-Zimmerantenne

ANT1528BK

THOMSON ANT1528BK HD Indoor Antenna A01

 THOMSON ANT1528BK HD Indoor Antenna A02 THOMSON
ANT1528BK HD Indoor Antenna A03

Operating Instructions

Thank you for choosing a Thomson product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

2. Package Contents
  • DVB-T Indoor Antenna
  • Power supply unit
  • Hook
  • Stand
  • Power inserter
  • 2 screws
  • 2 wall anchors
  • These operating instructions
3. Safety Notes
  • The product is intended for private, non-commercial use only.
  • The product is intended for indoor use only.
  • Use the product for its intended purpose only.
  • Protect the product from dirt, moisture and overheating and use it in dry rooms only.
  • Children should be supervised to ensure that they do not play with the device.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Connect the product only to a socket that has been approved for the device. The electrical socket must always be easily accessible.
  • Disconnect the product from the network using the power button­ – if this is not available, unplug the power cord from the socket.
  • Lay all cables so that they do not pose a tripping hazard.
  • Do not bend or crush the cable.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Do not modify the device in any way. Doing so voids the warranty.

Warning

  • Do not use the product if the AC adapter, adapter cable or power cable is damaged.
  • Do not attempt to service or repair the device yourself. Leave any service work to qualified experts.
  • Do not open the device or continue to operate it if it becomes damaged.
4. Specifications
Frequency band(s)  UHF: 470 – 790 MHz
Active antenna gain  UHF: 6 – 12 dBi
Impedance 75 ohm
Connection Coax plug
Ambient temperature -20 to +40° C
****Specifications in accordance with Regulation (EU) 2019/1782

Manufacturer’s name or trade mark, commercial registration number and address| Thomson, HRA12159, Dresdner Str. 9, 86653 Monheim
---|---
Model identifier| S003ATV0600015
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage / Output current/ Output power | 6.0 V DC / 0.15 A/ 0.9 W
Average active efficiency| 69.9 %
Efficiency at low load (10 %)| 57.9 %
No-load power consumption| 0.03 W

5. Startup and Operation

Note
Please note that the number and quality of stations received may vary depending on the position of the antenna and local conditions.

5.1 Powering the antenna with the power supply and the bandpass filter (fig. 1)

  • Connect the power inserter to the antenna input of the set-top box or digital TV.
  • Connect the coaxial cable from the antenna to the input power inserter
  • Connect it to the DC input of power inserter; and plug the AC end to an AC Outlet. (Please note that use only supplied power adaptor.)
  • Switch on the TV (and the set-top box, if present).
  • Check the reception quality. If the reception quality is not good, adjust the position or angle of the antenna.

5.2 Powering the antenna with the set-top box or digital TV (fig. 2)

  • Take the coaxial cable that attached on the antenna, and connect it to the antenna input connector of your Set Top Box (or Digital TV).
  • Please make sure the antenna powering function of your Set Top Box (or Digital TV) is activated.
  • Turn on the power switch on the rear panel.
  • Check the reception quality. If the reception quality is not good, adjust the position or angle of the antenna.

5.3 Wall mounting (fig. 3)

Attach the Wall mounting unit to the back of ANT1410/ ANT1415. Please use the hook, screws and anchors to fix the antenna on the wall.

Note

  • Before mounting, check that the wall you have chosen is suitable for the weight to be mounted Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
  • After the product has been mounted, check that it is sufficiently secure. You should repeat this check at regular intervals.

5.4 Setting up the antenna on a table, cabinet or similar (fig. 4)

Attach the provided stand to the rear of the antenna. Next, place the antenna on an even surface such as a table or entertainment stand. Check the reception quality. If the reception quality is not good, adjust the position or angle of the antenna.

6. Trouble shooting

If you cannot get the digital programs as you expect. Please check the following conditions:

  • Make sure the power switch on the rear panel is turned on.
  • Check the connection. Make sure all the connection is correct.
  • Check the antenna powering (coaxial cable powering) function of your STB. ANT1410/ ANT1415 is an active antenna so you will need to enable the antenna powering function. (Please check the operational manual of the STB or TV.)
  • If you place the ANT1410/ ANT1415 antenna on the TV panel, please try to move the antenna away from the TV panel. Some panel may reduce the signal reception of the antenna.
  • Adjust the direction and position of antenna to find the best reception angle.
7. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

8. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

9. Declaration of Conformity

Hereby, Hama GmbH & Co KG declares that the radio equipment type [00132187, 00132188] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.hama.com -> 00132188-> Downloads

Service & Support

www.thomson-av-accessories.eu

Thomson is a trademark of Technicolor (S.A.) or its affiliates used under license by HAMA GmbH & Co KG in 86652 Monheim / Germany

www.thomson-av-accessories.eu

THOMSON ANT1528BK HD Indoor Antenna certi

ANT1528BK
00132188

mythomson.com

Documents / Resources

| THOMSON ANT1528BK HD Indoor Antenna [pdf] Instruction Manual
ANT1528BK HD Indoor Antenna, ANT1528BK, ANT1528BK Antenna, HD Indoor Antenna, Indoor Antenna, HD Antenna, Antenna
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals