THOMSON THFP3510G Stand Mixer User Manual

: June 1, 2024
: THOMSON

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SAFETY INFORMATION
KNOW YOUR PASTRY ROBOT
BEFORE USING THE PASTRY PROBOT
USE OF PASTRY PROBOT
Documents / Resources

STAND MIXER
THFP3510G
User manual

Read the instruction manual carefully before first use.
This product complies with the requirements of Directive 2014/35/EU (which replaces Directive 73/23/EEC amended by Directive 93/68/EEC) and 2014/30/EU (replaces Directive 89/336/EEC).

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should be observed, including the following:

Read all instructions carefully.
To protect against the risk of electric shock, do not put the stand mixer, power cord or electrical plug in water or any other liquid.
This device should not be used by children. Keep the appliance and the power cord out of the reach of children.
The device can be used by people with reduced physical, sensory or mental capacities or a lack of experience and knowledge if they have received supervision or instructions concerning the safe use of the device and if they include the risks involved.
Children should not play with the device.
Unplug the appliance after use, before cleaning it and before changing accessories.
Avoid contact with moving parts. Always disconnect the appliance from the power supply when it is left unattended and before assembling, disassembling or cleaning it.
Do not use accessories other than those supplied with the device.
To unplug, turn it off, hold the electrical plug, and pull it from the wall outlet. Never yank the cord abruptly.
Never bring your hands, hair, clothes or utensils near the mixer, whisk, kneader or moving discs during work; you could seriously injure yourself and damage the device.
Keep hands, hair, clothing, as well as spatulas and other utensils away from the mixer whisk, beater or kneader when the appliance is in operation to avoid personal injury and/or damage to the robot pastry cook.
Remove the beaters from the stand mixer before washing them. A scraper can be used but only when the device is not working.
To avoid a hazard, have the damaged power cord replaced by the manufacturer, an authorized agent or a qualified person.
The use of attachments not recommended or sold by the appliance manufacturer may result in a risk of fire, electric shock or injury to persons.
Do not use the device outdoors. Your device must be placed on a horizontal surface, clean and stable during use.
Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces, including the stove.
Mixing flammable non-food substances can be dangerous.
Do not use this device for purposes other than those for which it was designed.
Do not operate in the presence of explosive and/or flammable fumes.
To disconnect, turn the speed control to “0”, then remove the electrical plug from the wall outlet.
WARNING: In order to avoid any danger linked to an accidental resetting of the thermal circuit breaker, the power supply of this device must not be carried out by means of a device external switching device, such as a timer, or by connection to an electrical circuit which is regularly switched on and off by the public network.

ADDITIONAL SAFETY INFORMATION

Polarized outlet – appliance is a polarized outlet – one blade is wider than the other. To reduce the risk of electric shock, this plug will fit only one way into a polarized outlet.
If the plug cannot be fully inserted into the electrical outlet, reverse the position. If it still cannot be inserted properly, contact your licensed electrician.
Do not attempt to remove this safety feature by modifying the socket in any way.

Suitable for use in contact with food.
IMPORTANT
It is forbidden to replace the power cable by yourself. If damaged, it should be repaired by the local distributors service department, the manufacturer or a similarly qualified person.
If the device is dropped, please have a qualified professional check before using it again. Internal damage can cause accidents. For any type of problem or repair, please contact the local distributors after-sales service, the manufacturer or a similar qualified person in order to avoid any risk.
Disposal and Environmental Responsibility:
In order to respect the environment, we encourage you to dispose of your device. You can contact local authorities or recycling centers for further information.
Read the instructions carefully before use. This product complies with the requirements of Directive 2014/35/EU (which replaces Directive 73/23/EEC amended by Directive 93/68/EEC) and 2014/30/EU (replaces Directive 89/336/EEC) .

KNOW YOUR PASTRY ROBOT

THOMSON THFP3510G Stand Mixer - PASTRY ROBOT

Pivoting arms
Release button
Speed control button
Device body
Non-slip feet
Drive axis
Cover
Bowl
Whip mswinger
beater whisk
Kneader
Anti-splash

BEFORE USING THE PASTRY PROBOT

Before assembling the robot, make sure the power cord is unplugged from the power outlet and the speed selector is in position 0.

By pressing the tilt button, the head of the device automatically releases and locks in the raised position.
Select the desired accessories, which depend on the task to be performed: beater for mixing and beating the egg, dough hook for kneading, whisk for beating and frothing the egg white. Directly insert the beater/dough hook/whisk until it locks. turning it counterclockwise until the pins engage and the accessory locks firmly.
Note: Make sure the beater, dough hook or whisk is fully inserted into the socket, otherwise your mixing results may be affected. (fig.1) To place it, Place the bowl in the place assigned to it. First place the bowl on the base, then turn the bowl clockwise until it locks into position (see fig.2).
To lower the head and place the mixer/dough hook/beater in the bowl by holding the head with one hand and gently lowering the head. A click is heard when the head has reached the correct position.
Make sure the bowl lid is in place

THOMSON THFP3510G Stand Mixer - PASTRY ROBOT 1

USE OF PASTRY PROBOT

Make sure the speed selector is in the 0 position, then plug in the power source.

Turn the speed selector to the desired setting, low speed 1-3 speed is used for kneader, medium speed 4-6 speed is used for mixer whisk, and the highest speed is used for beater whisk. Warning: Do not position a knife, metal spoons, fork, etc. in the bowl when in use.
The maximum operating time per cycle must not exceed 6 minutes and a minimum rest time of 20 minutes must be observed between two consecutive cycles. When kneading a yeast-based dough, it is advisable to use the speed selector first at low speed and then at high speed in order to obtain the best results.
Note:During kneading, some flour may adhere to the inside of the bowl, you need to remove the lid of the bowl and scrape the flour on the inner wall of the bowl with a spatula to achieve good kneading results. When kneading, you should remove the bowl cover after the flour and water are mixed completely, in order to avoid its shaking or falling off.
When blending is complete, turn the speed selector to position 0, unplug the cord from the outlet.
Hold down the tilt button, the head will automatically lift and lock into the tilt position. Warning: Before pressing the tilt button (i.e. before lifting the stand mixer head), make sure the beater, whisk and kneader are resting on both sides of the stand mixer head. robot, otherwise, when you lift the mixer head, the beater or whisk or a dough hook will engage in the mixer bowl; if the beater or whisk or dough hook rests on the front of the mixer head, you must turn the speed selector back on, let the beater run for a few seconds, then turn the speed selector off to stop the beater or whisk or dough hook on both sides of mixer head.
If necessary, you can remove excess mixture from the beaters or dough hooks with a plastic spatula.
Pull the beater/dough hook/whisk with a little force. It is recommended to hold the accessory firmly to remove it more easily. Warning: The speed selector must be in position 0 and the power plug must be unplugged before removing the accessories.

CLEANING AND MAINTENANCE

Unplug the appliance and wait until it has completely cooled down before cleaning it.
Warning: the blender cannot be immersed in water or any other liquid.
Wipe the outer surface of the head and base with a damp cloth and buff with a soft, dry cloth.
Wipe any excess food particles from the power cord.
Immerse the bowl, beater, spatula, dough hook and whisk in warm soapy water for thorough cleaning. Then rinse under running water and pat dry. Please note that the accessories are not dishwasher safe.

KITCHEN TIPS

Chilled ingredients, such as butter and eggs, should be at room temperature before your preparation begins. Prepare these ingredients in advance.
To eliminate the possibility of shells or spoiled eggs in your recipe, first crack the eggs into a separate container, then add them to the mixture.
Do not beat the preparations too much. Be sure to mix only until the recipe recommends it. Stir in dry ingredients only until just combined. Always use slow speed.
Weather conditions. Temperature changes the temperature of the ingredients and their variation in texture from area to area all play a role in the mixing time required and the results achieved.

IMPORTANT WARRANTY
Always start blending on the lowest speed. When the ingredients form a smooth paste, gradually increase to the speed recommended in the recipe card. NEVER PLACE THE BEATER, WHISK AND DOUGH HOOK IN THE DISHWASHER.
RECIPE

Itemstest ing| Recommended material| Weight| Instructions
---|---|---|---
Drummer| Flour| 150g| Set a program for 30 seconds, then set it to the highest workingt level for 3 minutes
sugar| 150g
Butter| 150g
Eggs| 3 pieces
Bicarbonates oda| 3g
dough
hook| Flour| 910g| Set a program for 30 seconds, then set it to work level 3 for 3 minutes
water| 519
grams
Whip| Eggs| 4 rooms| Set the highest working level for 2 minutes

If this logo is affixed to the device, it means that it must be disposed of in accordance with Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). Any hazardous substance contained in electrical or electronic equipment can have harmful effects on the environment and health during its recycling.
Consequently, at the end of the appliance’s useful life, it must not be thrown away with unsorted municipal waste.
As the end consumer, your role is essential to ensure the reuse, recycling or any other creation of value for this appliance. Several collection and recovery systems set up by your local authorities (recycling centers) and distributors are available to you. It is your responsibility to use these devices.
This product complies with the applicable requirements of Directives 2014/35/EU (replacing Directive 73/23/EEC as amended by Directive 93/68/EEC) and 2014/30/EU (replacing Directive 89/336/EEC)
The warranty does not cover worn parts of the product, or problems or damage resulting from:

deterioration of the coating linked to normal wear and tear of the product;
defects or deterioration due to contact with liquids and corrosion caused by rust or the presence of insects;
any incident, abuse, misuse, alteration, disassembly or unauthorized repair;
improper maintenance, improper use of the product, or connection to an electrical source with incorrect voltage; the use of accessories not
supplied or not approved by the manufacturer.

This product has been manufactured and sold under the responsibility of SCHNEIDER CONSUMER GROUP.
THOMSON, and the THOMSON logo are trademarks used under license by SCHNEIDER CONSUMER GROUP – further information at www.thomson-brand.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.

This product is imported by: SCHNEIDER CONSUMER GROUP
12, rue Jules Ferry, 93110 Rosny-sous-Bois, FRANCE