THOMSON CT550I Charging Station Alarm Instruction Manual

: June 1, 2024
: THOMSON

Table of Contents

THOMSON CT550I Charging Station Alarm
Product Specifications
Product Usage Instructions
Getting started
What is in the box
Description of the parts
Controls
Control functions
Charging functions
Product specification
MORE INFORMATION
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

THOMSON CT550I Charging Station Alarm

THOMSON-CT550I-Charging-Station-Alarm-PRODUCT

Product Specifications

Type : Charging Station Alarm
Power Supply Type: AC/DC
Power Consumption: 15 W (max)
Wireless Charging Consumption: 5 W (max)
Dimensions: 185 x 90 x 26 mm

Product Usage Instructions

Getting Started

Before using the device, read the user manual carefully and follow the instructions provided. Ensure to retain the manual for future reference.

Warnings and Safety Instructions:

Read and understand all instructions before using the device.
Do not remove the housing unit from the device.
Avoid placing the device on top of other electrical equipment.
Protect the power cable from being walked over or trapped.
Clean the device using a soft cloth, avoiding abrasive cleaning products.
Ensure easy access to the power cable, plug, and adapter for unplugging.
Avoid using the device near water or in wet/humid environments.
Unplug the device during storms or when not in use for an extended period.
Device suitable for children aged 8 years and older.

Additional Information:

The device is for domestic use only and should not be used outdoors. Regularly inspect the transformer for any damage and do not use it if damaged.

Getting started

Take the appliance out of the box.
Remove all the packaging from the product.
Place the packaging inside the box or dispose of it safely in compliance with the waste sorting instructions shown on the product packaging.

Warnings and safety instructions
You must read and understand all of the instructions before using this device. The guarantee will be invalidated in cases of damage caused by failure to follow the instructions.

Never remove the housing unit from the device.
Never place this device on top of other electrical equipment.
Protect the power cable, to avoid it being walked over or trapped somewhere, particularly by the plugs, power sockets, and the device’s power connection. Make sure that the power supply voltage corresponds to the voltage indicated on the information panel on the rear of the device. When you disconnect the device, always unplug the device from the power socket by pulling on the plug itself. Never pull on the cable. Make sure that you have secured all other connections before plugging in the plug.
Only use accessories recommended by the manufacturer.
Repairs must be carried out by qualified repair technicians. Repairs are necessary when the device has been damaged in any way, and particularly:
- If the power cable is damaged;
- If liquid has been spilled onto the device or if objects have been inserted into it;
- If the device is exposed to rain or humidity;
- If the device isn’t working normally;
- If the device has fallen or been struck with something.
The serial number can be found on the underside of the device.
Never obstruct the vent.
Make sure that you leave sufficient space for ventilation. Position the device on a stable surface.
This device must be used in a moderate climate, away from direct sunlight, flames, and heat, heating devices, cooking appliances, or any other device (including amps) that generates heat. Do not install this device close to a heat source.
The batteries (battery block or inserted batteries) must not be exposed to excessive heat, such as sunlight, fire, etc.
Always unplug the device before cleaning it. Do not lubricate any part of this device. Clean it using a soft cloth. Do not use abrasive or aggressive cleaning products.
Make sure that you can always easily access the power cable, the plug, and the adapter so that you can unplug this device from the mains power socket.
Do not use this device close to a water point. It must not be exposed to water drops or splashes. Do not use this device in a wet or humid environment.
Unplug this device in the event of a storm, or if you don’t plan on using it for a long period.
This device can be used by children aged 8 years and older, and it can also be used by individuals with physical or sensory disabilities, learning difficulties, or without experience or knowledge of similar devices, under supervision or with instructions regarding the safe use of this device, as long as they understand the risks associated. Children must not play with this device or its power cable (risk of strangulation). Children must not clean or repair this device without supervision.
This device must only be powered by a very low-voltage safety supply, corresponding to the instructions provided on the device.
The battery must be removed from the device before disposing of it. The device must be unplugged from the power supply when you remove the battery.
When it is in use, the device must be located at least 20 cm from human bodies.
Choking risk: The small parts are not designed for children under the age of 3 years or individuals with tendencies to put objects in their mouths.
This toy must only be connected to equipment with the following symbols:
CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

The symbol with a lightning bolt inside an equilateral triangle signals to users that there are hazardous, non-insulated electrical voltages inside the device, which are strong enough to pose a risk of electrocution.
The symbol with an exclamation mark inside a triangle indicates that there are important instructions regarding operation and maintenance (repairs) in the documentation accompanying the device.

Place the device in the desired location, and unwind the power cable. Insert the cable into the power socket and switch it on, if necessary.
For ELECTRICAL EQUIPMENT, the socket must be located close to the equipment, and it must offer easy access.

Please take the following information into account: Only use the electrical power supply indicated below.
Dongguan Kingdrive Industrial Co., Ltd.
Model number: KDP-A3120200E

What is in the box

Check and identify the contents of your box:

Charging Station Alarm
Mains power adapter
USB-C to USB-A adapter (underneath)
User Manual

Description of the parts

THOMSON-CT550I-Charging-Station-Alarm-FIG-3

Controls

Clock button
Alarm button
– button
+ button
Power input
USB-C output
USB-C to USB-A adapter
Battery compartment (CR2025 batteries)
Dimmer switch/Alarm repeat button
Alarm light
Alarm repeat light
Wireless charging light (Red = off, Solid blue = charging, Flashing blue = error)

Operation
Plug the mains power plug into your wall socket.

Control functions

Press and hold the clock button (1) for 2 seconds to set the time, and then press button (3) or (4) to change the hours.
- Press the clock button (1) again to set the minutes, and then press button (3) or (4) to change the minutes.
- Press the clock button to set the date, and then press button (3) or (4) to change the year. Press the clock button (1) again to set the days, and then press button (3) or (4) to change the number of the day.
- Press the clock button (1) again to change the month, and then press button (3) or (4) to change the number of the month.
- Press the clock button to confirm the date and time set.
- Briefly press the clock button (1) to switch from the time and temperature display to the date, and press again or wait 8s to return to the time display.
Press and hold button (2) to set the alarm, and then press button (3) or (4) to change the hours.
- Press the alarm button again to set the minutes, and then press buttons (3) or (4) to change the minutes.
- Press the alarm button again to confirm the alarm set. The alarm is then set, and the alarm light (10) will come on. Briefly press to activate the alarm, press twice to deactivate it.
- When you’re not setting the time or the alarm, press buttons (3) or (4) to increase or decrease the alarm volume by one level.
- There are 5 volume levels, from the quietest to the loudest. The lowest level is approximately 40 dB and the highest level is around 80 dB — with steps of 10 dB between each level.
- The volume level is displayed on the screen. The alarm’s sound slowly increases, reaching the set volume within 15 seconds.
Press the dimmer switch/repeat button (9) to adjust the brightness of the clock display (20%, 100%, or off) in time mode. When the alarm sounds, press to snooze it for 9 minutes. The alarm will then sound again, 9 minutes later. The repeat light (11) will come on.
- The alarm will sound for 3 minutes if it is not repeated or dismissed. Press the alarm button (2) to dismiss it when it sounds.
  Note: The clock and alarm programs have a backup battery in the event of the power supply being cut off (e.g. After a power cut, etc.). If the programs are not backed up, you’ll need to replace the battery. See below.

Charging functions

Place your mobile phone on top of the device, in the center.
The LED light (12) will illuminate in solid blue when the wireless charging is in progress. If nothing is charging, it will remain red.
If a foreign metal object is detected in the charging zone, the LED light (12) will slowly flash blue, and the charging function will disabled.

Note: Your phone must support wireless charging. Otherwise, the LED light will flash blue to signal an error.

USB-C charging function

Charge another device using the USB-C port (6) located at the rear of the alarm.
Use the adapter (7) if your charging cable has a USB-A plug.
Please note that the USB C port is designed to charge low-power items such as smart watch hatch or earbuds. Any other product may temporarily cause adverse effects.
Note: The USB-C output functions at 5 V/1 A (max.).

Interior temperature function
This device has an interior temperature function. The probe is integrated into the power cable. No action on your part is required. The temperature display is located to the right of your display.

Changing the backup battery

Remove the safety screw using a compatible screwdriver.
Using a tool, turn the cover of the battery compartment counter-clockwise, to align the two guide triangles. You’ll feel slight resistance.
Remove the battery compartment cover and take out the used battery.
Replace the battery with a new CR2025 battery.
Replace the battery compartment cover and turn it clockwise to slot it back into place, and check that the hole is properly aligned with the screw thread.
Screw the screw back in. You have completed the battery change.

Battery Warning

This product contains one or more batteries.
Use batteries correctly to prevent any injury or fire caused by a leak, overheating, explosion, erosion or other damage.
Keep new and used batteries out of the reach of children or any vulnerable person. Stop using the product if the battery compartment does not close properly.
If the liquid from an alkaline battery comes into contact with the skin and/or eyes, rinse immediately with fresh water and consult a physician.
If an alkaline battery leaks, wipe up the liquid with a cloth and replace the battery with a new one.
Do not swallow the battery/ies. If swallowed, a battery can cause severe internal burns in 2 hours and can cause death. If batteries are swallowed, contact a poison center immediately and consult a physician.
Use AA Ni-MH, alkaline, or lithium batteries.
Do not charge these batteries. Charging non-rechargeable batteries causes gas and/or heat emissions that can cause explosions and/or fires.
Do not use different types of batteries or a mixture or new and old batteries at the same time. Insert the batteries according to the correct polarity (+ and -).
Do not put the same battery poles in contact with each other.
Remove dead batteries quickly. There is a risk of the battery exploding if this is not replaced correctly or if the appliance is not used for some time.
Replace the battery with an identical or equivalent model.
The batteries (or battery pack) must not be exposed to excessive heat, such as sunlight, fire, etc.
Do not heat batteries and do not dispose of them in fire or water.
Do not use metal pliers or metal objects such as the point of a pen or tweezers to remove batteries. Avoid deforming, crushing or piercing batteries.
Do not disassemble the batteries.
Cover the ends of the batteries with tape to prevent explosions and combustion when these need to be scrapped.
Be environmentally friendly when scrapping batteries
Do not dispose of batteries in ordinary household waste.
When disposing of batteries, be sure to follow local disposal regulations.

BATTERY WARNING
KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.

Product specification

Type

Power voltage
Wireless charging consumption
Dimensions

Specifications

DC 12 V⎓2 A
15 W (max.)
185 x 90 x 26 mm

Type

Total electrical consumption
USB-C charging consumption

Specifications

24 W
5 W (max.)

Technical specifications of the adapter

Power supply: Mains power 100-240 V 50/60 Hz 0.8 A Max.
Power supplied: 12 V ⎓ 2 A Max.
Cable length: Approx. 1.0 m

The device risks switching off in an environment with electrostatic discharge. The user must then recharge the battery and restart the device.

Care of the environment

Your product has been designed and manufactured using high-quality materials and components that can be recycled and reused.
Attention should be drawn to the environmental aspects of battery disposal.
When this crossed-out wheelie bin symbol is applied to a product, it means that the product is covered by European Directive 2002/96/EC. Please find out about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products in your household waste. By ensuring this product is disposed of correctly, you are also helping to prevent potentially negative consequences for the environment and human health.

Additional information

THOMSON is a trademark of Talisman Brands, Inc. used under license by Bigben Interactive.
This product is manufactured and sold under the responsibility of Bigben Interactive.
THOMSON and the THOMSON logo are trademarks operated under license by Bigben Interactive – for more information: www.thomson-brand.com.
All other products, services, corporate names, trademarks, trade names, product names, and logos referenced herein are the property of their respective owners.

Declaration of conformity
Bigben Interactive hereby declares that the CT550I-type radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www .bigben-interactive.co.uk/support/

Guarantee
This product is guaranteed by Bigben for 2 years from the date of purchase, except in countries of the European Economic Area, which offer a longer warranty period. We recommend that you keep your receipt for any claims. The warranty covers breakdowns due to defective material, a missing element, or a manufacturing defect. In this case, contact our technical support. For any problem with a defective product, contact your point of purchase with your receipt. The warranty does not cover problems of improper use.

Support

Made in China
Manufactured by BIGBEN INTERACTIVE SA 396, Rue de la Voyette
CRT2 – FRETIN
CS 90414
59814 LESQUIN Cedex – France
www.bigben.eu

MORE INFORMATION

Fabricant : Bigben Interactive FRANCE 396, Rue de la Voyette, C.R.T. 2, Fretin, CS90414 – 59814 Lesquin Cedex, France
Vertrieben von Bigben Interactive DEUTSCHLAND GmbH Walter Gropius Str. 28, 50126 Bergheim, Deutschland
Distribué par Bigben Interactive Belgium s.a./n.v. Boulevard d’Angleterre 2 / Bte 4 1420 Braine l’Alleud
Gedistribueerd door Bigben Interactive NEDERLAND b.v. ‘s-Gravelandseweg 80, 1217 EW Hilversum, Nederland
Distribuido por Lineas Omenex Metronic S.L. Pol. Ind. Can Salvatella – Avda. Arraona 54-56 08210 Barberà del Vallès (BCN) – España
Distribuito da Metronic Italia s.r.l via Marconi 31, 20071 Vermezzo con Zelo (MI), Italia

MADE IN CHINA

FRANCE , du lundi au vendredi (sauf jours fériés) :
9h00-18h00 ou [email protected]
N°Cristal 09 69 39 79 59)
DEUTSCHLAN D, Montag bis Freitag von 09:00 bis 18:00 Uhr (außer an Feiertagen)
Tel. : 02271-9047997
Mail: [email protected]
BELGIQUE , [email protected]
NEDERLAND , [email protected]
ESPAÑA , [email protected]
Tel.: 93 713 26 25
ITALIA , [email protected]
Tel : 02 94 94 36 91
www.bigben.eu

FAQ

Q: What should I do if the device is exposed to water?
- A: If the device is exposed to water, unplug it immediately and do not use it until it has been inspected and deemed safe by a professional.
Q: Can the device be used with an external timer?
- A: No, the device is not designed to operate with an external timer or separate remote control system. It should be used as intended for domestic use only.