westomatic primo MAXI Cleaning Coffee Grinder Blades Instruction Manual
- June 4, 2024
- westomatic
Table of Contents
westomatic primo MAXI Cleaning Coffee Grinder Blades
INSTRUCTIONS
These instructions show how to clean the coffee grinder if:
- It needs preventative maintenance (annually)
- Or if no ground coffee is being produced.
*The ground coffee in the outlet can unintentionally swell because of water splashing upwards when the piston is going down to start position after making a recipe.
Check if there is any water visible above the piston when it has reached the
rest position.
If so: take out the inlet-hose brewer on the front-side and blow on it: there
should be an open connection with the rest water bin on top of the normal
waste bin.
-
Turn off machine. Close the bean hopper slide moving to the right (downwards).
-
Remove the complete bean hopper from the machine.
-
Using a vacuum – remove coffee beans from top of grinder.
-
Loosen the screw on the top. Take away plastic outlet, sliding upper part away from grinder.
-
Clean/Renew Grinder outlet.
PN:1057039. *make sure plastic is not cracked -
Unscrew both screws from the aluminium grinder head (L & R).
-
Take out the left screw.
-
Take away the upper aluminum (fixed disc) head of the grinder.
-
Clean the upper ceramic disc with a brush and vacuum cleaner.
-
Clean the rotating disc -using a vacuum cleaner and a brush.
-
Ensure plastic grinder bottom is facing front side of the machine.
-
Fit head back, position correctly and replace screws.
-
Refit the grinder outlet – starting at the bottom and using gentle force.
-
Fit bean hopper back into machine, fill with beans and open bottom slide.
-
Close the door.
-
Switch on the machine
-
Take 2-3 coffees – this fills up the grinder again.
-
Check the 3rd drink for correct dosing time.
+ 4 4 ( 0 ) 1 6 2 6 3 2 3 1 0 0
sales@westomatic.com