westomatic EASY 6000 Vending Services Ltd User Guide
- June 4, 2024
- westomatic
Table of Contents
westomatic EASY 6000 Vending Services
INITIAL CHECK LIST
-
CHECK FOR DAMAGE
Report any issues -
LEVEL UP
Using the adjustable feet and a spirit level make sure the machine is level. -
ATTACH PLINTHS
Detachable for easy maneuvering / move into position -
POWER ON MACHINE
(wait 12 hours for machine to reach temperature) -
CONFIGURE & FILL COIN MECH/CARD READER
(if fitted) -
CHE CK DRUM CONFIGURATION
(adjust if necessary) -
DRUM / DELIVERY DOOR TEST – CMD 1
-
FILL MACHINE , SET PRICES & SELL BY DATES
CLEANING
WEEKLY:
- Hoover Drums to remove any crumbs/debris
- Wipe clean thoroughly each drum
- For a deeper clean, drums can be removed and are dishwasher safe.
EVERY 6 – 12 MONTHS:
- FRIDGE – disconnect and remove, hoover ventilation and condenser grille, test temperature probes, check fans move smoothly and check cut out temperature.
- COMMAND #1 – Check all delivery doors and drums are running smoothly, deep clean drums, and check entire machine is free of rubbish/food/debris.
- COIN MECH – Clean/test/refill/check reject mechanism
SCAN ME
FOR CLEANING, FILLING & MAINTENANCE GUIDES
FILLING
NORMAL FILLING: (Command 51)
- Either open the door, pull each drum out and fill from the top – being careful that each product fits within the compartment. The drums reloaded must be confirmed by pressing the drum number on the internal keypad – complete full revolution.
- Or using the internal keypad with the door open, select the drum number and fill as it rotates.
SMART FILLING: (Command 51)
- This allows for machine to recognise expired products. The correct date/time/days must be entered in Command 71-78.
- Press button 2, display shows “select drum to refill”
- Close the door, select drum to refill, machine will identify empty compartments, delivery door opens, place product in machine, press Shopper button to record product, continue until full.
5 SIMPLE STEPS
- USE SHOPPER BUTTON TO BROwSE PRODUCTS
- ENSURE CHOSEN SELECTION IS NEXT TO ARROW
- SELLING PRICE IS DISPLAYED ON PRICE DISPLAY
- IF REQUIRED ENTER PAYMENT – EITHER VIA CASH/ CARD
- PRESS SELECTiON BUTTON DELIVERY DOOR WILL OPEN TO RETRIEVE PRODUCT
TROUBLESHOOTING GUIDE
DELIVERY DOOR WILL NOT OPEN-ERROR CODE
- Open machine and check tor any obstructions in the drum.
- Check there is no debris on the motors
- If the issue persists, the door motor may need replacin8
HEALTH CONTROL
- With the door open press either the # (ENTER) on the internal keypad or the shopper button to reset.
- If the issue persists consult an engineer regarding fridge fixes .
ERROR CODE 10
- Internal (Cabinet) temperature probe defective.
- Call-out required by engineer to test and fit a new probe.
ERROR CODE 11
- vaporator probe detective.
- Call-out required by engineer to test and tit a new probe.
NO CHANGE DISPENSED
Check the coin mech is full – clean & fill if necessary.
MACHINE WONT DELIVER PRODUCTS
- Check to see if sell by dates are active for products.
- Check the Health Control- machine won’t deliver if fridge is too warm.
PRODUCTS EXHAUSTED
- Occurs if products have sold out or drums not reset properly after loading.
- Open door, press the drum number and complete a full revolution, close door, drum is now reset.
CONTACT
- Units 7-8 Block 4 Forde Court, Forde Road, Brunel Industrial Estate, Newton Abbot, Devon, TQ12 4BT
- www.westomatic.com
- TEL: +44(0)1626323100
- E MAIL:[email protected]
- WEB:www.westomatic.com