westomatic EVOLVE Fuel your Body Installation Guide

June 4, 2024
westomatic

westomatic EVOLVE Fuel your Body - LOGO 1 westomatic EVOLVE Fuel your Body - LOGO 2EVOLVE Fuel your Body
Installation Guide westomatic EVOLVE Fuel your Body - FIG
3

Walcome
TO YOUR NEW EVOLVE
WE KNOW YOU’RE EXCITED SO LET’S GET GOING!
INITIAL CHECKLIST

  1. CHECK FOR DAMAGE
    Report any issues

  2. LEVEL UP
    Using the adjustable feet and a spirit level make sure the machine is leuel.

  3. CONNECT WATER
    Connect mains water to the back of the machine

  4. ATTACH PLINTHS
    Detachable for easy maneuvering/moue into position

  5. Ili INSTALL WATER FILTER
    (if not already installed)

  6. TURN THE WATER SHUT-OFF VALVE ON

  7. FLUSH WATER FILTERS
    Flush buttons are located on the inside of the door

AND YOU’RE READY TO FILL THE MACHINE
SCAN OR CODE FOR HELP

westomatic EVOLVE Fuel your Body - FIGwestomatic
EVOLVE Fuel your Body - FIG 1

FILLING GUIDE

  1. TWIST CHUTE UPWARDS
  2. LIFT UP & REMOVE THE CANISTER FROM FLAVOUR DECK
  3. HOOK CANISTER INTO FILLING CLIPS
  4. USE THE FUNNEL PROVIDED TO HELP FILL
  5. REPLACE CANISTER TO FLAVOUR DECK
  6. TWIST CHUTE INTO PLACE – POINT ST, -LIGHT DOWN
  7. ENSURE THE MIXING BOWL IS CLEAN AND CLEAR OF POWDER
  8. PRESS FLUSH TO RUN A RINSE CYCLE

westomatic EVOLVE Fuel your Body - FIG 2 USER Guide
SIMPLE STEPS

  1. PLACE BOTTLE IN DISPENSE AREA
  2. HOVER YOUR FINGER OVER THE BUTTON TO SELECT A DRINK
  3. ALLOW MACHINE TO DISPENSE DRINK
  4. REMOVE BOTTLE FROM MACHINE AND ENJOY

TROUBLESHOOTING GUIDE

THE MACHINE ISN’T DETECTING BOTTLE
– Clean the sensor in the dispensing area.
– If the issue persists, the sensor may need adjusting by an engineer.
WASTE BUCKET FULL
– Remove the waste bucket and empty it.
– Ensure the weighted pipe is placed back in the bucket.
ERROR CODE 14
Button Failure.
– Call-out required by the engineer.
POWDER NOT DISPENSING
Check there is still powder in canisters (agitate to free powder).
– Clean dispense nozzle/whipper/pipe to ensure there is no blockage.
– Press flush buttons to flush pipes.
CHILLER NOT DISPENSING COLD WATER
Check Fuses
– If the issue persists contact the engineer
SOUND AND VIDEO ADJUSTMENTS
– Scan QR for instructions on using the screen

REFUEL RECOVER REPEAT
CONTACT
Units 7-8 Block 4 Forde Court, Forde Road
Brunel Industrial Estate, Newton Abbot, Devon, TQ12 4BT
www.westomatic.com
**** +44 (0)1626 323100
support@westomatic.com
www.westomatic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

westomatic User Manuals

Related Manuals