SALTER SAB220559 Smart Scale Instruction Manual

: June 9, 2024
: SALTER

Table of Contents

Safety Instructions
Battery Safety
Care and Maintenance
Specifications
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Smart Scale
Instruction Manual

Please retain instructions for future reference

Safety Instructions

BATTERY WARNING: KEEP OUT OF THE REACH OF CHILDREN.
This product contains no user serviceable parts. Only a qualified electrician should attempt repairs.
Do not place, store or use the product near direct sunlight or direct heat sources or in a damp/high humidity environment.
This product is a high precision device; handle it with care This product is intended for domestic use only.
CAUTION: DO NOT USE THE ANALYSER FUNCTION IF YOU HAVE A PACEMAKER OR OTHER MEDICAL DEVICE FITTED. IF IN DOUBT, CONSULT YOUR DOCTOR.

Battery Safety

This product is supplied with 3 AAA batteries. Only batteries of the same or equivalent type as those recommended should be used with this product.
Batteries are to be inserted with the correct polarity Exhausted batteries should be removed from the product to avoid leakage.

Care and Maintenance

Wipe the exterior of the scale with a soft, damp cloth and allow it to dry thoroughly Never immerse the scale in water or any other liquid Do not use harsh or abrasive cleaning detergents or scourers to clean the scale, as this could cause damage.
Before First Use
Remove the plastic isolator tab from the battery compartment (if present) prior to use.
Make sure the batteries are inserted following the correct polarity Position the scale on a firm flat surface.
For use on carpet attach enclosed carpet feet.
Switching On the Smart Scale
Position the scale on a flat, level surface Press the centre of the platform and make sure no weight is on the scale. [0.00/ZERO] will be displayed. To select a weight unit (kg, st or lb) press [>] or [<]. The scale will switch off and is now ready for use.
NOTE: THE SETUP PROCESS MUST BE REPEATED IF THE SCALE IS MOVED. AT ALL OTHER TIMES STEP STRAIGHT ONTO THE SCALE.
Using the Smart Scale to take Weight Readings
STEP 1: Step on to the platform and stand still.
STEP 2: After 2-3 seconds the weight reading will be displayed.
STEP 3: Step off the platform; the weight reading will be displayed for several secondsbeforethescaleturnsofl Pairing a Mobile Device
STEP 1: Download and install the Salter Health app on a mobile device.
STEP 2: Turn on Bluetooth in the settings menu on the mobile device.
STEP 3: 0pen the Salter Health app and follow the on screen instructions to set up a profile
STEP 4: Once an account is set up navigate to the Settings menu in the app
STEP 5: Select ‘Add Device’
STEP 6: Select ‘$A00432 Scale’ from the list of devices.
STEP 7: Follow the instructions shown on the mobile device to finish setup.
STEP 8: Repeat Steps 1-7 for each user and mobile device.
NOTE: EACH USER NUMBER CAN ONLY BE PAIRED WITH ONE MOBILE DEVICE.
RESULTS WILL BE AVAILABLE ON THE PAIRED DEVICE ONLY.
Personal Data Entry Without the App
STEP 1: Press the centre of the platform and make sure no weight is on the scale. [0.00/ZERO] will be displayed
STEP 2: Select kg, st or lb weight mode by pressing [>] or[<] STEP 3: Press While the user number is flashing, select a user number by pressing [>] or [<]. Press again to confirm the selection.
STEP 4 : The height display will flash. Press [>] or [<] to select the correct height. Press to confirm.
STEP 5: The age display will flash. Press [>] or [<] to select the correct age Press to confirm
STEP 6: The male or female symbol will flash. Press [>] or [>] to choose between male , female male athlete or female athlete Press to confirm
STEP 7: The display will show the chosen settings then switch off. The memory is set
STEP 8: Repeat Steps 1-7for a second user, or to change user details
NOTE: IF AGE IS SET BETWEEN 6-12 YEARS, CHILD MODE WILL AUTOMATICALLY BE SELECTED. IN CHILD MODE ONLY WEIGHT, BODY FAT, BODY WATER AND BMI ARE DISPLAYED.
ATHLETE MODE: IF THE AGE IS SET BETWEEN 15-50 YEARS ATHLETE MODE IS AVAILABLE. AN ATHLETE IS DEFINED AS A PERSON WHO IS INVOLVED IN INTENSE PHYSICAL ACTIVITY OF APPROXIMATELY 12 HOURS A WEEK AND WHO HAS A RESTING HEARTBEAT OF APPROXIMATELY 60 BEATS PER MINUTE OR LESS.
Using the Smart Scale
This scale uses BIA (Bio Impedance Analysis) technology which passes a small electrical impulse through the body to distinguish fat from lean tissue. The electrical impulse cannot be felt and is perfectly safe. Contact with the body is made via stainless steel pads on the glass platform.
NOTE: DURING PREGNANCY A WOMAN’S BODY COMPOSITION CHANGES CONSIDERABLY IN ORDER TO SUPPORT THE DEVELOPING CHILD. UNDER THESE CIRCUMSTANCES, BODY FAT PERCENTAGE READINGS COULD BE INACCURATE AND MISLEADING. PREGNANT WOMEN SHOULD THEREFORE ONLY USE THE WEIGHT FUNCTION. FOR MORE INFORMATION, VISIT SALTER.COM /UNDERSTANDING-YOUR-MEASUREMENTS.
STEP 1: Position the scale on a flat, level surface.
STEP 2: Press the centre of the platform and make sure no weight is on the scale. [0.00/ZERO] will be displayed
STEP 3: Press . Select the user number by pressing [>] or [<] STEP 4: The LCD display will show the saved data for that user, followed by a zero reading
STEP 5: With bare feet, step onto the platform and stand still. Feet must be in contact with the metal pads on the platform and evenly spaced
STEP 6: User weight, body fat percentage body water percentage BMI [BMI], muscle mass , BMR [BMR] and bone mass will be displayed
STEP 7: If the user number is paired with a mobile device, } will be displayed and the data will be sent to the paired mobile device,
STEP 8: If the device is out of range or the app is close[lwf be displayed and the data will be saved on the scale and transferred next time the scale is used.
NOTE: TO RECEIVE OATA THE SALTER HEALTH APP MUST BE OPEN.
THE SALTER HEALTH APP WILL NOT RECEIVE OATA IF IT IS CLOSEO, OR BLUETOOTH IS TURNEO OFF.
Warning indicators
Lo – Replace the batteries.
Err – Weight exceeds maximum capacity. Unstable weight. Stand still
Err2 – Out of range, incorrect operation or poor feet contact.

Specifications

Product code: SA00432
Display Backlit LCD
Battery. 3x 1.5 V AAA batteries (included)
Operating frequency. 2.4 GHz
Max RF output: < 20 dBm
Units kg/st/lb
Declaration of Conformity
UJP Global Sourcing UK Ltd. hereby declares that this product is in compliance with the essential requirements and other provisions of directive 2014/53/EU
The declaration of conformity may be consulted at UP Global Sourcing UK Ltd, UK Victoria Street, Manchester 0l9 000/Germany.
Edmund-Rumpler Strae 5, 51149 K~ln or online at salter.com/declaration- letter Model No. $A00432
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries or its packaging means that this product and any batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for humanheal thandthe environment duetothe possiblepresence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city/ municipality office, household waste disposal service, or the retailer If this product does not reach you in an acceptable condition, please contact our Customer Services Department at www.salter.com Please have your delivery note to hand as details from it will be required. If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions). To be eligible for the extended guarantee, go to guarantee.upgs.com/salter and register your product within 30 days of purchase.

Points de collecte sur www.quefairedemesdechets.fr
Manufactured by

www.fsc.org
UP Global Sourcing UK Ltd., UK. Manchester 0L9 000. Germany. 51149 K~ln.
MADE IN CHINA.
www.salter.com
©Salter trademark. All rights reserved.
00120722/40121022/03

http://fqrct.com/t/972fb8a
For more information, scan the QR code or visit our website:
health.salter.com