LANCOM 1790VA-4G+ GmbH System User Guide
- June 4, 2024
- LANCOM
Table of Contents
LANCOM 1790VA-4G+ GmbH System
INSTRUCTION
- LTE / 4G antennas
- Connect the two supplied cellular antennas to the connectors at the side of the device.
- VDSL / ADSL interface
- Use the supplied DSL cable for the IP-based line to connect the VDSL interface and the provider’s telephone socket.
- For more information, please contact your Internet service provider.
- Ethernet interfaces
- Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.
- SIM card slot (bottom side of the device)
- Release the SIM-card holder and lever it upwards.
- Slide the SIM card into the guide slot of the SIM-card holder.
- Press the holder down until it clicks into place.
- SIM card slot (bottom side of the device)
- Release the SIM-card holder and lever it upwards. Slide the SIM card into the guide slot of the SIM-card holder. Press the holder down until it clicks into place.
- Configuration interface
- Use a serial configuration cable to connect the serial interface (COM) to the serial interface of the device you want to use for configuring / monitoring (separately available)
- USB interface
- You can use the USB interface to connect a USB printer or a USB memory stick.
- Power
- After connecting the cable to the device, turn the bayonet connector 90° clockwise until it clicks into place. Use only the supplied power adapter
Please observe the following when setting up the device
- The power plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device
- Keep all ventilation slots on the side of the device clear of obstruction
- In case of wall mounting, use the drilling template as supplied
- Rack installation with the optional LANCOM Rack Mount (separately available)
Initial startup,
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
CONTROL PANEL
The additional power LED statuses are displayed in 5-second rotation if the device is configured to be managed by the LANCOM Management Cloud.This product contains separate open-source software components which are subject to their own licenses, in particular, the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request. Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www .lancom-systems.com/doc
LANCOM,
LANCOM Systems, LCOS, LAN community and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>