DAS 4 SL22 IP68 Dustproof Smartwatch User Manual

June 6, 2024
DAS 4

DAS - LOGO

SL22 User ManualDAS 4 SL22 IP68 Dustproof
Smartwatch

Operation Guide
Up button: short press enter pedometer will show steps, calories, distance.
Down button: long press to activate watch, short press to return to the standby interface, Long press to shut down the watch and restart it if the software crashes.
Touch panel gestures: slide right/left/up to enter different functions, after entering each function, swipe from left to right for return, swipe from right to left for confirmation
Watch face switch: long press the screen, there will be a dial choice, tap to confirm.
Status bar: slide down to enter, it tells Bluetooth status, battery life, time, etc.DAS 4 SL22 IP68 Dustproof Smartwatch - BUTTON
1

Charging instruction: this product adopts is using magnetic force charging. Supports 5V mobile phone charger and computer USB interface. Put the charging cable to the back of the device’s charging pins, it will charge automatically. It takes 75 mins to fully charge. Do not use the watch when charging.
Caution: You should place the magnetic charger correctly at the pins. If the charger is not properly aligned with the pins, it will cause the circuit to burn.DAS 4 SL22 IP68 Dustproof Smartwatch - button

The watch can connect with your phone by downloading the application “M active” using one of the methods below: 1)Android / IOS: Scan the QR code using any scanner, to download the app “M active”DAS 4 SL22 IP68 Dustproof
Smartwatch - QR CODE

http://dw.ss-tjd.com/download/mactive.html

2)Android: search and download the “M Active” app from Google Play.
iOS: search and download the “M Active” app from App Store.
Bluetooth 4.0 connection: After installation, turn on cellphone Bluetooth and M Active App, confirm the notifications, location, all permissions are enabled, tap Device – Add  Device, search “L19” device and tap connect. Some Android phones need to turn ON GPS to connect.
How to set notification: into phone’s Settings -App Management, find “M Active”-permissions Management, and turn every permission ON.
What if I do not get the notice?
1. First, make sure that you have enabled all the notifications from the app and that you have given the required permissions. If not, then you must enable them.
2. Due to the lack of uniformity of Bluetooth protocol of various mobile phone brands, sometimes the Bluetooth connection between the mobile phone and the watch is not stable. You can turn off the Bluetooth of the mobile phone and reconnect it or restore the watch to factory settings.
3. Delete “M Active” and download it again. Note that all permissions should be opened during the installation process, and then the watch should be reconnected.

Main functions

Calling
Dial: Bluetooth call via cellphone, talk at the watch end.
Phonebook: Sync the contacts in the cellphone, up to 200 usual contacts.
Call logs : Sync all the calls history in the cellphone.
SMS: Sync the messages in the cellphone maximum of 10 messages No IOS support yet.
Notifications: When connected, you decide which notifications can be pushed from the phone to your watch. You can select said notifications from the app.
Bluetooth : Search the device you want connect or disconnect the devices.
Pedometer : Recording the steps you walked during the day, calories burn and distance.  Every day 0 12 o’clock all the data will be saved automatically and reset to 0. Slide up enter option; status, on and off; history, it can check 7 days local records; Goal set a target for everyday steps; put into all your information, such as Gender, Height, Weight, etc. for more accurate measure your steps data.
Sleep monitor:
The device turns on the sleep monitor automatically from 9 p.m to 9 a.m. It records your sleep duration and quality, helps to build a better rest time, improves sleep quality. Slide up enter options; Status, On and Off; History, check out deep sleep and light sleep; instruction.
Heart rate monitor:
wear the watch tightly with your wrist, best position would be upper of the hand-wrist, around 20 seconds it will show the real time heart rate data, slide down into history,
the mode includes a single measure and continuous measure; and instruction. The normal value is. 60-100 BPM. However, that number can differ. It depends on your age, gender, and physical condition. Please consult your doctor.
ECG: Via optical heart rate and ECG c technology.”. 30 seconds after the measurement the message “To the App” will appear. That means that the measurement was saved in your phone’s app.
Blood pressure: Tap to enter and start. The measurement. After about a minute you will get a single measurement of your blood pressure.
Sedentary: Set a reminder for you to stand up, to avoid sitting for a prolonged period. Anti-lost: Press find the phone. Your phone will start to vibrate and ring. Once found, press the top on the watch to end the function.
Alarm : Setting 5 alarms maximum, long press can cancel the alarm.
Stopwatch: Single timing, tap the left icon to start timing, and tap to pause, tap again for a cumulative time.
Calculator
Calendar
Setting : All the settings here for the set as follows: Bluetooth Setting: Turn on/off the Bluetooth in the watch.
Clock: clock type, there are a couple of watch faces for you to choose from. Time will be synced once connected with M Active App.
Wake up screen receives notification: You can set wake up the watch screen when messages are received. Battery working time will be reduced.
Display : Set the screen on time and brightness adjustment.
Sound: you can select the caller profile, select Ringtones, select notification ringtones.
Unit : Set metric or. Imperial
Reset : Restore the factory settings
Languages: When connected, the language will be the same as your phone’s if supported. You can manually change the language from the watch’s menu.
Gesture: Flipping mute call, flipping mute alarm, gesture wake-up (screen automatically on once raise hand), and shaking to answer calls.
Warranty
About the fault caused by the user’s personal reasons, we don’t offer a free warranty, as follows:
1). Disassemble or refit the product.
2). Caused by immodesty drop.
3). All artificial damage or misuse (such as: make water into the host, the external force shatter, scratch damage of peripheral components, etc.), all are beyond the scope of the warranty.
4. When asking for a free warranty, you must provide a warranty card with the seal of purchase place and purchase date.
5. If you met problems during use, please contact the shop customer service which you bought from.

IP68 – Only dustproof and only accidental contact with freshwater – hand washing.www.das-4.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals