Pure Clean Smart Robot Vacuum User Manual

: June 7, 2024
: Pure Clean

Pure Clean Smart Robot Vacuum User Manual

SAFETY INSTRUCTIONS

Before using this product, please read the following safety instructions and follow all normal safety precautions. · Before using this product, ensure the power switch is ON. · Turn off the power switch on the right side of the main body when you don’t need to use this product for a long time.

WARNING

Only the certified technician may disassemble the product. Users are not allowed to disassemble or repair the product.
Only use the adapter provided by the factory. Using other unmatched adapter may cause electric shock, fire or product damage.
Do not touch the power cord, plug or adapter when your hands are wet.
Do not make clothes or part of a body drawn into the product’s wheels.
Do not make this product close to cigarette, lighter, match or any flammables.
If the product requires cleaning, clean it after being fully charged.
Do not over-bend the power cord or pressure the power cord with heavy or sharp objects.
Indoor use only, do not use outdoors.
Do not sit on top of this product or attach an object on top of it.
Do not use this product in wet or moist environment (any environment with liquid)
Before use, collect the floor environment (remove all the fragile objects and cords, clothing’s papers and drapes .etc. that may get caught in the product).
Do not place this product where it is easy to drop off (tables, chairs, etc.).
Turn off the power switch when you don’t need to use this product for a long time.
Before use, check whether adapter and outlet are properly connected.
To avoid tipping, inform all the people in the house when this product is working.
The product may not be able to pass through steps over 10mm.
Use this product in temperature from -10°C to 40°C. Do not place this product on a high-temperature environment.
The battery must be removed from the product before it is scrapped.
The product must be disconnected from the supply mains when removing the battery.
Dispose of batteries safely

NOTE: This product could not be used by children, mentally challenged people or people lack of related experience and knowledge (unless there’s people instruct or supervise them).

Product Parts

Main Body and Accessories

Pure Clean Smart Robot Vacuum User Manual - Product
Parts

Robot Anatomy

Pure Clean Smart Robot Vacuum User Manual - Robot
Anatomy

Charging Dock

Pure Clean Smart Robot Vacuum User Manual - Charging
Dock

Remote Control

Pure Clean Smart Robot Vacuum User Manual - Remote
Control

Display Panel

When the robot is working or under operation, display panel will show the current status as below:

Pure Clean Smart Robot Vacuum User Manual - Display
Panel

Remote Control Operating

Product Operating

1. HOW TO GET STARTED

1. Place in charging dock, plug in adapter, signal light on charging dock will flash.
NOTE: Put charging dock against the wall and remove obstacles about 1 meter at both sides and about 2 meters forward.

Pure Clean Smart Robot Vacuum User Manual - Place in charging dock, plug in
adapter

2. Turn on the Power Switch around the power socket, then display panel will flash.
(If no command received, the robot will activate sleep mode after 15 sec.)
NOTE:
A. Please always keep the power switch on.
B. If power switch is turned off, all the scheduling will be lost.

CAUTION: Before charging the robot, please make sure the power switch is turned ON or else the robot cannot be charged.

3. Charge the robot in either way as shown below:
A. Plug into an outlet.
B. Press HOME to make the robot return to charging dock to charge itself.

Pure Clean Smart Robot Vacuum User Manual - Charge the robot in either
way

For better extending battery life:
A. Before first use, charge the robot overnight. When fully charged, display panel will turn solid .
B. In normal use, always store the robot on charging dock with base plugged in.
C. If the robot will not be used for a long time, turn the power switch off, fully charge the robot and store it in a cool dry place.

4. Auto Charging
The robot will automatically return to charging dock when battery is low.

2. STARTING UP/PAUSE/SLEEPING

Sleeping mode:
Robot is not working, no display on display panel and power switch is on; Selected mode: Robot is not working, “88:88” on display panel is flashing; Cleaning mode: Robot is working, display panel will show different status.

1. Starting up
A. Make sure the power switch is on
B. Press CLEAN button on main body or on remote control to start cleaning.

NOTE: If robot is in sleeping mode, press CLEAN button to wake the robot up from sleeping mode. Then press CLEAN for a second time, the robot will start cleaning automatically.

2. Pause
To exchange robot from cleaning mode to selected mode:
A. Press either button on display panel;
B. Press CLEAN on remote control.
NOTE : When robot is paused, press CLEAN to make the robot to re- start cleaning.

3. Sleeping
To turn the robot into sleeping mode from selected mode:
A. Robot will automatically enter sleeping mode if no command received after 15 seconds.
B. Keep pressing CLEAN on main body for 3 seconds.

3. SCHEDULING

You can schedule to let the robot starts cleaning from a certain time. For example, if you set 6:30, robot will start to clean after 6 hours and 30 minutes from now on, and will clean everyday at this time. All the scheduling will be automatically cancelled if the power switch turns off.

Scheduling on Remote:

Power on the robot and point the remote towards the robot.
Press PLAN and then use directional buttons to set the schedule.
Press CLEAN to save the setting. To cancel, make the number to “00:00”.

Scheduling on Display Panel:

Turn ON power switch and press PLAN to enter scheduling mode.
In scheduling mode, press PLAN to exchange hour and minute, press HOME to increase number and press SPOT to decrease number.
Press CLEAN to confirm the setting. To cancel, long press PLAN for 5 seconds and then press CLEAN to confirm cancelling.

When you set the clock time or schedule, all your operation will be confirmed by tone from robot; If no tone received, your setting is unsuccessful.

4. CLEANING MODE

1. Auto Cleaning
The robot will clean the room automatically and adjust its cleaning according to the situation.

NOTE:
Press CLEAN button on robot or on remote control to start auto cleaning.

2. Spot Cleaning
Put the robot near a dirty area and press SPOT on remote control to start spot cleaning.

NOTE:
Spot cleaning will automatically stop after the area is cleaned and then the robot will turn to selected mode.

3. Edge Cleaning
Put the robot near the edge (wall) and press EDGE on remote control to start edge cleaning.

NOTE:
Edge cleaning will automatically stop when robot could not detect any edges, or you could manually press CLEAN to stop edge cleaning.

PRODUCT MAINTAINING

1. Cleaning Side Brushes

Clean the side brushes when it gets dirty and replace if it’s damaged.
NOTE:
Before replacing side brushes, check and match “L””R” mark on both side brush and bottom of robot.

2. Cleaning dust bin and filter

Clean and empty dust bin after each use, steps are as shown in below figures.

NOTE:
After taking out dust bin, check whether there is foreign matter stuck in suck passage and clean it. Wash HEPA filter after 15-30 days’ use and replace it after use for 6 months at maximum.
• Install both HEPA and primary filters when they are dry.
• HEPA and primary filter could be replaced if needed.

Pure Clean Smart Robot Vacuum User Manual - Cleaning dust bin and
filter

3. Cleaning cliff sensors and auto charging pins.

Slightly clean the sensor window and auto charging pins with a soft dry cloth
NOTE: Charge connecting points on charging dock if it needs cleaning.

Pure Clean Smart Robot Vacuum User Manual - Cleaning cli sensors and auto
charging pins.