EVERBILT 90750 Genevieve 6 ft. White Adjustable Closet Organizer Double Instruction Manual

90750 Genevieve 6 ft. White Adjustable Closet Organizer Double
Instruction Manual 73.5 in. Double Long Hang with Shoe Racks, Six Shelf Stack and
Four Drawers ( Two Large and Two Small)
SKU#: 1008446126 / 1008446106 / 1008446089

90750 Genevieve 6 ft. White Adjustable Closet Organizer Double

Shipping Package Checklist:

10069411 /7/10066411491006841140
1007115853/100719202011007792059| 25n. White/Gray/Birch Shoe Rack (2pk) – Add- On
24 it x 16 in. Shoe Flack(2PIO, White/Gray/Birch – Add-On| I
1006841112/1006841104/1001141024| 21n. White/Gray/Birch Decor Shelf Cover (2pk)| 4
1007775625/10OT715807/10:175837| 24 0116 it Law Drawer Kt. White/Gray/Birch – Add-On| 2
100T775352/100T775795/1007775821| 24 in. X 16 ii. Small Drawer Kt. White/Gray/Birch – Add-On| 2

Quick Start Guide
Look for packet in this ‘BASE KIT’ box labeled “Modular Configuration Guide”, find your layout in the packet, and make sure you received the correct number of boxes and
contents to build your specific layout.

1. First, find the “Assembly and Installation” instructions for building your ‘BASE KIT’ in this base kit box.
   a) Measure your space to make sure the complete closet design will fit.
   b) Be sure to install the ‘Base Kit’ at the furthest left side of your closet space.
   c) Note: At this time, only install the hang track and vertical rails. Save the brackets, shelves, closet rods and decorative covers for later installation steps.

2. Next, install the hang track and vertical rails from the ‘Extension’ box(s) if your layout includes extensions. Save the brackets, shelves, closet rods and decorative covers for later installation steps.

3. Now install the brackets, shelves, and closet rods from the base kit and extension boxes, at the desired locations.

4. Next, install components from the ‘Add-On’ box(s) if your layout includes add-ons.

5. Last, finish the closet by installing the decorative hang track covers, vertical rail covers, and shelf covers.

ASSEMBLY AND INSTALLATION GUIDE

73.5 IN. LONG HANG WITH SHELF STACK – BASE KIT
Item # 1006-844-947
Model # 90441
Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase of this closet organizer. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Everbilt!

Safety Information

• Please read and strictly follow the assembly instructions for proper installation. Failure to do so may cause objects to accidentally fall, which may result in personal injury or property damage.
• Make sure to distribute the weight evenly on each shelf and use the correct hardware for system mounting.
• Do not overload, which may cause collapse of the system and cause personal injury or property damage.
• Do not climb, stand or step on the product, which may cause collapse of the system and cause personal injury or property damage.
• Be sure to wear appropriate safety equipment when using power tools and hand tools.
• The metal may have sharp edges or corners. The use of protective gloves is strongly recommended.
• Recommend to protect the work surface during assembly.
• This product is not a toy and contains small parts which may cause choking hazard for small children. Close supervision is necessary near children.

DANGER: The metal may have sharp edges or corners. The use of protective gloves is strongly recommended.
WARNING: Do not overload the shelving units. This may cause collapse of the system and cause personal injury or property damage.
IMPORTANT: Please read and strictly follow the assembly instructions for proper installation.

Product Specifications

LOAD CAPACITY
Maximum 45 lb per linear foot (closet shelf and rod) / Maximum 20 lb per linear foot for rod loading (when installed per manufacturer’s instructions below):

• Drywall installation requires mounting into at least 1 stud.
• Drywall requirement for claimed load : ASTM C1396 Compliant, Minimum thickness 1/2 in.
• Maximum spacing between two vertical rails: 24 in. center-to-center spacing, as shown in “Plan Your Layout” section.
• Closet rod support bracket a maximum of 18 in. spacing.
• Installed per manufacturer’s requirements.

Warranty

This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.

Pre-installation

PLANNING INSTALLATION

1. Measure the closet width and plan the layout. See the “Plan Your Closet Layout” section for illustration examples.
2. Select the correct hardware for assembly. See “choose your hardware” section below.
3. Use stud finder to locate the studs and mark. It is recommended to mount hang tracks onto studs.
4. For creating larger layouts that include multiple hang tracks, install this kit hang track first then install additional hang track extensions ensuring additional hang track is level and in line with previously mounted hang track(s).

TOOLS REQUIRED

HARDWARE PACKAGE CONTENTS

NOTE: Hardware not shown to actual size.

CHOOSE YOUR HARDWARE
STUDS
Secure to the wall with panhead screws (AA) at stud locations.
CONCRETE Drill 1/4 in. holes, insert wall anchors (BB) and secure to the wall with panhead screws (AA).
WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov

CHOOSE YOUR HARDWARE
DRYWALL

Drill a 1/2 in. hole in the drywall. If  you hit a stud during drilling, use above stud   ardware/instructions for each stud location.| Insert bolt through hang track (or vertical rail/vertical rail joiner) then screw on toggle (DD). Install toggles (DD) in each hole of the component you are attaching before attaching to the wall. Compress and pass the toggle (DD) through the hole you drilled.

Allow the toggle (DD) to spring apart behind the drywall.| Screw the bolt (CC) until tight to secure. Pull back on screw head for tension if toggle (DD) is spinning behind wall. Install toggles (DD) in each hole of components before attaching to wall.

COMPONENT PACKAGE CONTENTS

Plan Your Closet Layout

When planning your installation, measure the dimensions of your installation location. For specific designs refer to separate Modular Closet System Configuration Guide.  NOTE: All vertical measurements are taken from the floor.

Installation

Install Hang Track

• Use a stud finder to locate and mark your studs if installing on drywall.
• Place the longest hang track (C) flush against the wall, the bottom of the track should be 84 in. off the ground. The thicker side should be on top, closest to the ceiling.

TIP: When creating larger closet layouts that include multiple hang tracks, install this kit hang track to the far-left of your planned closet design.
Additional shorter length hang tracks will be installed in continuous sequence to the right of this kit hang track.

• Make sure the track is level and mark each screw hole on the wall. Ensure at least one hole aligns with a stud.
• Use correct hardware to secure the hang track and tighten (see “Choose Your Hardware” in the Pre-installation section).
• Repeat steps above for adding remaining hang tracks (J). Be sure to install the next shorter hang tracks (J) level and flush with previous installed hang track (C).

WARNING: Before cutting, drilling, or hammering into any wall, verify the location of electrical, plumbing, and gas lines. Cutting may cause serious injury.

Install Upper Vertical Rails

• Attach the upper vertical rail (A) to the hang track (C) slots as the diagram shows (see Fig. 1).
• Slide the first vertical rail (A) to the left edge of the hang track (C) , so make sure it is fiush with the end of the hang track (C) (see Fig. 2).
• Use a level to ensure upper vertical rail (A) assembly is vertically straight (plumb) and secure it using screw holes in vertical rail with appropriate hardware (see Fig. 3).
• Use provided spacer (O) to line up the next upper vertical rail (A) (see Fig. 4). It is CRITICAL to install vertical rails at the correct spacing using spacer (P) for the system to work.
• Repeat the above process to install remaining upper vertical rails.

If creating a larger kit (which ships in several boxes) install all hang tracks and vertical rails from boxes labeled ‘EXTENSION’ BEFORE installing any brackets, shelves or decorative covers in following steps.
WARNING: Before cutting, drilling, or hammering into any wall, verify the location of electrical, plumbing, and gas lines. Cutting may cause serious injury.

Install Vertical Rail Joiners and Lower Vertical Rails
SCENARIO 1: STUD

• Push vertical rail joiner (I) up into upper vertical rail (A) as shown, secure the vertical rail joiner (I) on hole B with panhead screw (#12 x 2 in.) (see Fig. 5).
• Put the lower vertical rail (B) as shown and secure the lower vertical rail (B) on the hole C and D with panhead screw (#12 x 2 in.) (see Fig. 6).
• Use remaining screw holes in lower vertical rail (B) to secure to wall with appropriate hardware, just as you did for upper vertical rail (A) installation (see Fig. 7).
• Use provided spacer (P) to line up the next lower vertical rail. It is CRITICAL to install vertical rails at the correct spacing using spacer (P) for the system to work.
• Repeat the above process to install remaining vertical rail joiners and lower vertical rails.

SCENARIO 2: CONCRETE

• Tear the drilling template box (P) according to the dashed line (see Fig. 8).

• Align the drilling template box (P) as a locator as shown and mark the holes on the wall (see Fig. 9).

• Drill 1/4 in. holes and insert wall anchors (1/4 in.) into hole B, C and D (see Fig. 10).
  

• Push vertical rail joiner (I) up into upper vertical rail (A) as shown, secure the vertical rail joiner (I) on hole B with panhead screw (#12 x 2 in.) (see Fig. 11).

• Put the lower vertical rail (B) as shown and secure it on the hole C and D with panhead screw (#12 x 2 in.) (see Fig. 12).

• Use remaining screw holes in lower vertical rail (B) to secure to wall with appropriate hardware, just as you did for upper vertical rail (A) installation (see Fig. 13).

• Use provided spacer (P) to line up the next lower vertical rail (B) . It is CRITICAL to install vertical rails at the correct spacing using spacer (P) for the system to work.

• Repeat the above process to install remaining vertical rail joiners and lower vertical rails.

SCENARIO 3: DRYWALL

• Tear the drilling template box (P) according to the dashed line (see Fig. 14).
• Align the drilling template box (P) as a locator as shown and mark the holes on the wall (see Fig. 15).
• Drill 1/4 in. holes for hole B and C, drill 1/2 in. hole for hole D. Insert wall anchors (1/4 in.) into hole B and C (see Fig. 16).
• Push vertical rail joiner (I) up into upper vertical rail (A) as shown, secure the vertical rail joiner (I) on hole B with panhead screw (#12 x 2 in.) (see Fig. 17).
• Put the lower vertical rail (B) as shown and secure it on hole C with panhead screw (#12 x 2 in.) and on hole D with toggle (3/16 in.) and bolt (3 in.) (see Fig. 18). Make sure the toggle (3/16 in.) and the bolt (3 in.) are installed on lower vertical rail (B) before secure.
• Use remaining screw holes in lower vertical rail (B) to secure to wall with appropriate hardware, just as you did for upper vertical rail (A) installation (see Fig. 19).
• Use provided spacer (P) to line up the next lower vertical rail (B) . It is CRITICAL to install vertical rails at the correct spacing using spacer (P) for the system to work.
• Repeat the above process to install remaining vertical rail joiners and lower vertical rails.

If creating a larger kit (which ships in several boxes) install all vertical rail joiners and lower vertical rails from boxes labeled ‘EXTENSION’ BEFORE installing any brackets, shelves or decorative covers in following steps.

Install Brackets

• Insert shelf brackets (H) to the vertical rails (A – B).
• Insert back tabs of bracket into vertical rail slots at desired position.
• Pull down on front of bracket and ensure bracket is locked in place.
• Ensure shelf brackets are inserted at same height on vertical rails so shelf will be level once installed.

Install Shelves

• Make sure your shelves (G) fit your closet layout design.
• Hold the shelf’s (G) front rod, let it fit into the bracket’s (H) front notches as the diagram shows, then push down the shelf’s rear part allowing the shelf’s rear horizontal rod to lock into the back clip of bracket.

NOTE: The bracket is supposed to be shared by two shelves in system as shown on the right. Each end of shelf will take up half of bracket.

Install Closet Rod Brackets and Closet Rod

• Count 6 rods or more from one side of the wire shelf and install closet rod brackets as shown. Maximum spacing between closet rod brackets is 18 in. for this system (see Fig. 20).
• Put the closet rod support bracket (M) at an angle as shown and place the back part onto the horizontal rod (B) (see Fig. 21).
• Pull down the closet rod support bracket (M) and snap onto the shelf’s front rod (C) (see Fig. 21 and Fig. 22).

NOTE: Closet rod brackets need to be installed BEFORE any decorative shelf covers are installed on shelf.
Install Closet Rod End Caps

• Measure length of closet rod assembly needed based on your closet layout.
• Push end caps (N) into both ends of closet rod (L) (see Fig. 9).
• Position closet rod assembly at desired location and snap into closet rod brackets (M) (see Fig. 10 and Fig. 11).

NOTE: Make sure to complete joiner assembly (if needed based on layout) before adding end caps to the finished ends of closet rod.
If creating a larger kit (which ships in several boxes) install all brackets, shelves, and closet rods from each box BEFORE installing decorative hang track covers and vertical rail covers in the following steps.
Install Hang Track Covers

• Place the hang track cover (D/K) with the direction as shown then push to snap and lock. Slide from left to right to make sure the whole cover is secured.
• Make sure to put longer hang track cover (D) on the longer hang track (C).

Install Vertical Rail Covers
Measure open areas of the vertical rail, this includes: bottom of hang track cover to top of shelves, bottom of shelf brackets to top of shelves, bottom of brackets to end of vertical rails, etc.
Cut the vertical rail cover (E-F) to your desired length with hacksaw.
Push and press one end of the vertical rail cover (E-F) to the rail to lock onto the rail. Press and move the other end to make sure the whole vertical rail cover is securely in place. NOTE: For safety, please remember to wear safety gloves, goggles and strictly follow the instructions of your hacksaw during the cutting.

Care and Cleaning

EverbiIt closet organizer is powder coated. Clean following these steps:

• To remove dust, stains, and other deposits: Use a soft cloth (or soft brush) with a diluted solution mix of warm water and a mild detergent (such as liquid dishwashing detergent). DO NOT use solvents.
• Make sure you thoroughly rinse the surface(s) with clean fresh water after cleaning to remove all residue.
• Thoroughly dry the surface(s) before reuse.

Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-305-1726
HOMEDEPOT.COM
Retain this manual for future use.

Assembly and Installation Guide
Item #1006-841-177 / 1006-841-145 / 1006-841-140
Model #90450 / 90452 / 90454
25 in. White / Gray /Birch Shoe Rack (2-Pack) -Add-On

PARTS LIST

Installation
NOTE: PLEASE REMOVE PROTECTIVE FILM (TWO SIDES) BEFORE INSTALLATION. Warranty
This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.
HOMEDEPOT.com
Please contact 1-800-305-1726 for further assistance.
WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov

Assembly and Installation Guide
24 in. White / Gray / Birch Shoe Rack (2PK) – Add-On
Item #1007-775-853 / 1007-782-020 / 1007-782-059
Model #90676 / 90678 / 90680

PARTS LIST

Installation
NOTE: Please remove protective film on the decor shoe shelf cover before installation.

1. Install shoe shelf brackets (B) on your existing vertical rails. Pay attention to the installed site of left and right vertical rails. NOTE: The bracket has two angles as 69°and 80.5°. Pick the angle you want and make sure all of brackets have the same angle.
2. Place the wire shelf (A) on the installed brackets (B), ensuring the rear horizontal rod sits under the back hooks of the brackets (B).
3. Install the clips (E) over wire shelf (A) and onto brackets (B) as shown below.
4. Put the decor shoe shelf cover (C) on the lip of wire shelf (A), then install as shown.
5. Install the end caps (D) on the decor shoe shelf cover (C). NOTE: If you install more than 2 PCS of decor shoe shelf covers, it is not necessary to put the end caps between them.

Warranty

This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.
WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov

Assembly and Installation Guide
24 in. White / Gray / Birch Décor Shelf Cover (2-Pack)
Item #1006-841-112 / 1006-841-104 / 1006-841-024
Model #90442 / 90444 / 90446

PARTS LIST

Installation

1. REMOVE PROTECTIVE FILM (TWO SIDES) BEFORE INSTALLATION.
   

2. PUT ON ENDCAPS (B) AS SHOWN BELOW (SINGLE OR CONNECTED).

3. PLACE A DÉCOR SHELF COVER (A) ONTO WIRE SHELF AND PUSH ALL THE WAY TO THE REAR SO THAT THE FRONT LIP OF THE COVER IS FLUSH AGAINST THE FRONT LIP OF THE WIRE SHELF.
   SNAP DOWN REAR OF THE DÉCOR SHELF COVER (A) OVER BACK OF THE BRACKET AT EACH INTERSECTION WITH VERTICAL RAILS.

ASSEMBLY AND INSTALLATION GUIDE
24 IN. X 16 IN. WHITE / GRAY / BIRCH DRAWER KIT-ADD-ON
Item # 1007-775-352 / 1007-775-625
1007-775-795 / 1007-775-807
1007-775-821 / 1007-775-837
Model # 90670 / 90671
90672 / 90673
90674 / 90675Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-305-1726
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase of this drawer kit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Everbilt!
Safety Information

• Please read and strictly follow the assembly instructions for proper installation. Failure to do so may cause objects to accidentally fall, which may result in personal injury or property damage.
• Make sure to distribute the weight evenly on each unit.
• Do not overload, which may cause collapse of the system and cause personal injury or property damage.
• Do not climb, stand or step on the product, which may cause collapse of the system and cause personal injury or property damage.
• Be sure to wear appropriate safety equipment when using power tools and hand tools.
• The metal may have sharp edges or corners. The use of protective gloves is strongly recommended.
• Recommend to protect the work surface during assembly.
• This product is not a toy and contains small parts which may cause choking hazard for small children. Close supervision is necessary near children.

DANGER: The metal may have sharp edges or corners. The use of protective gloves is strongly recommended.
WARNING: Do not overload the units. This may cause collapse of the system and cause personal injury or property damage.
IMPORTANT: Please read and strictly follow the assembly instructions for proper installation..

Product Specifications

• Drywall installation requires mounting into at least 1 stud.
• Drywall requirement for claimed load : ASTM C1396 Compliant, Minimum thickness 1/2 in.
• Spacing between two vertical rails: 24 in. center-to-center.
• Installed per manufacturer’s requirements.

Warranty
This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.
WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov
Pre-installation
PLANNING INSTALLATION

1. If installing 2 or more drawer kits, install bottom drawer kit first.
2. Drawer kit is heavy. It is recommended to install the drawer kit on the brackets with two people.
3. Please remove all packaging paperboards from inside the drawer kit before installation.

COMPONENT PACKAGE CONTENTS

Installation
Install Handles
Install Brackets

Install drawer kits on the bracket NOTE: Please remove all packaging paperboards from inside the drawer kit before installation.
Install bracket covers

Care and Cleaning

Everbilt closet organizer is powder coated and drawer kit is made of particle board. Clean following these steps:

• To remove dust, stains, and other deposits: Use a soft cloth (or soft brush) with a diluted solution mix of warm water and a mild detergent (such as liquid dishwashing detergent). DO NOT use solvents.
• Make sure you thoroughly rinse the surface(s) with clean fresh water after cleaning to remove all residue.
• Thoroughly dry the surface(s) before reuse.

Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Retain this manual for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>