EDIMAX EW-7833AXP Dual Band 802.11ax and Bluetooth Installation Guide

EW-7833AXP
Quick Installation Guide
04-2022 / V2.0

EW-7833AXP Dual Band 802.11ax and Bluetooth

Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan
Email: support@edimax.com.tw
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven, The Netherlands
Email: support@edimax.nl
Edimax Computer Company
530 Technology Drive Suite 100, Irvine, CA 92618, USA
Email: support@edimax.us

I-1. Insert the PCIe Adapter
I-1-1. Before inserting the PCIe Adapter, turn off your computer and unplug the power cord. Once the computer is power off, remove the case panel.
Ensure the power is off before you move on I-1-2.
I-1-2. Insert the PCIe Adapter into the desktop PCIe slot. To use the Bluetooth function, connect the included USB Bluetooth header  connector cable to the mother board and PCIe Adapter respectively.

I-1-3. There are 2 ways to connect the external antennas.

1. Connect the antennas to the PCIe Adapter directly.
2. Connect the external antennas with the included magnetic antenna base.

I-1-4. Reattach the case panel and power-on your computer.
I-2. Download & Install the Driver

1. Please access the link below. Search the model name in the search box and download the driver.
   https://www.edimax.com/download
   

2. Unzip the downloaded file and run the setup.exe. After following the instructions to complete the installation procedures, restart the computer.

I-3. Connect or Pair
I-3-1. Connect to the Wi-Fi Network

1. Click the Wi-Fi icon on the windows taskbar to connect to the Wi-Fi network. The Wi-Fi icon might be different depending on your OS versions.
   (Refer to II. FAQ -> Q2)

2. Select your Wi-Fi network (SSID), connect and enter the password if it is required. I-3-2. Pair with Bluetooth Devices
   Double-click the Bluetooth icon and select “Add Bluetooth or other device”. Select the Bluetooth device from the list. Follow the instructions to complete the Bluetooth pairing. (If the Bluetooth icon doesn’t appear, refer to II. FAQ -> Q3)

To activate Bluetooth without problems, please disable all existing Bluetooh devices first. (Refer to II. FAQ -> Q1)

Frequently Asked Question (FAQ)

Q1. How to disable the existing Bluetooth device?****

– A. Right-click the Windows Start button , and select the “Device Manager”. Expand all the Bluetooth devices. Right-click on target device and disable the bluetooth device one by one.

Q2. After the driver is installed, why is the Wi-Fi icon not displayed on the Windows taskbar?

– A. For Windows 7, please right-click “Date and Time” at the taskbar, and select “Properties”. Find the system item “Network”, set the behaviors as “On”. Then the Wi-Fi icon will be displayed on the Windows Taskbar.

Q3. Why the Bluetooth icon doesn’t display on the Window taskbar?

– A1. Click Windows Start button , and click “Setting” , select “Device and other setting”, and set the stauts as “On” to enable the bluetooth service.
– A2. If the Bluetooth icon still doesn’t appear, you may need to install the driver and try again. Please go to section I-2, to download and install the driver and try again.

More Information

For more information, please visit our website with the following URL or scan the QR code: https://www.edimax.com/download
Please search the model name to enter the referred page.

https://www.edimax.com/download

Safety Instructions

The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details.

• This product is designed for indoor use only.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product.
• The device contains no user serviceable parts. Do not attempt to service the product and never disassemble the product.
• Do not spill food or liquid on your product and never push any objects into the openings of your product.
• Do not use this product near water, areas with high humidity, or condensation.
• Keep the product away from radiators and other heat sources.
• This device is not designed to be operated by children.
• Always unplug the product from mains power before cleaning and use a dry lint free cloth only

Simplified EU Declaration of Conformity

Hereby, Edimax Technology declares that the radio equipment type, Wi-Fi USB Adapter, is in compliance with Directive 2014/53/EU, 2014/35/EU.
The full text of the EU declaration of conformity is available at the following internet address:

https://www.edimax.com/download/doc

COPYRIGHT
Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.

| AT| BE| BG| HR| CY| CZ| DK|
---|---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE|
IT| LV| LT| LU| MT| NL| PL|
PT| RO| SK| SI| ES| SE| UK| UK(NI)

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.

FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
This device is restricted to indoor use.

Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.

Canada, Innovation, Science and Economic Development Canada (ISED) Notices
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

RED Compliance Statement

Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU: Frequency range (MHz)| Max. Transmit Power (dBm)
---|---
2402-2480 (BT+BLE)| 14.11
2412-2472 (Wi-Fi)| 19.88
5180-5320| 20.78
5500-5700| 21.76

A simplified DoC shall be provided as follows: Article 10(9)
Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type AX3000 Dual band PCI-E
Network Adapter is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/

This device meets the EU RED requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62311 SAR is measured with this device at a separation of 20cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 20cm away from your body to ensure exposure levels remain at or below the as-tested levels.
For class 2 device (supporting WLAN 5GHz: 5150-5350 MHz)
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not Intended for Use
None

EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU.

WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or eturned to the supplier for disposal.

Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives.
Equipment: AX3000 Dual band PCI-E Network Adapter
Model No.: EW-7833AXP
The following European standards for essential requirements have been followed:

Directives 2014/53/EU Spectrum| EN 300 328 V2.2.2 (2019-07)
EN 301 893 V2.1.1 (2017-05)
EN 300 400 V2.1.1 (2017-03)
---|---
EMC| EN 55032:2015+AC:2016
EN 55035:2017
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EMF| EN 62311:2008
Safety(LVD)| LVD-EN 62368-1:2014+A11:2017
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 29/April/2022, Eindho
Signature: Printed Name: David Huang
Title:
Director

| a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Date & Place of Issue: 29/April/2022, Taipei
Signature: Printed Name: Hunter Chen
Title:
Director
---|---

Declaration of Conformity

We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom Radio Equipment directives.
Equipment: AX3000 Dual band PCI-E Network Adapter
Model No.: EW-7833AXP
The following European standards for essential requirements have been followed:

Radio Equipment Regulations 2017 (S.I. 2017/1206) Spectrum| EN 300 328 V2.2.2 (2019-07)
EN 301 893 V2.1.1 (2017-05)
EN 300 400 V2.1.1 (2017-03)
---|---
EMC| EN 55032:2015+AC:2016
EN 55035:2017
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EMF| EN 62311:2008
Safety(LVD)| LVD-EN 62368-1:2014+A11:2017
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Date & Place of Issue: 29/April/2022, Eindhoven
Signature: Printed Name: David Huang
Title:
Director

| a company of:
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Date & Place of Issue: 29/April/2022, Taipei
Signature: Printed Name: Hunter Chen
Title:
Director
---|---

References

• EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
• EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
• EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart Home
• EDIMAX - Download
• EDIMAX - Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>