ASRock iEP-9010E, iEPF-9010S Series Edge AIoT Platform Instruction Manual
- June 9, 2024
- ASRock
Table of Contents
iEP-9010E, iEPF-9010S Series Edge AIoT Platform
Instruction Manual
iEP-9010E, iEPF-9010S Series Edge AIoT Platform
Package Contents
| Item | Quantity |
|---|---|
| iEPF-9010S Series / iEP-9010E Series | 1 |
| Rubber foot | 4 |
| M3x8L Round Head Bolts for Rubber foot | 4 |
| Desk Mount | 2 |
| M3x5L Countersunk Screws for Desk Mount | 8 |
| M4x10L Round Head Bolts for Desk Mount | 4 |
| M3x4L Round Head Bolts for SODIMM Bracket | 4 |
| Terminal Block 1X3P ST 7.62m | 1 |
| Terminal Block 1X3P ST 5.0m | 1 |
| Terminal Block 1X10P ST 3.5m | 2 |
| Screw for M.2 I-Head M2*2 | 3 |
| Screw for MiniPCIe 3.7xM2.0x3.3L | 2 |
| Screw M3*4mm for 2.5” Tray | 16 |
| M.2 Heatsink | 1 |
| SODIMM Bracket w/Mylar | 2 |
| SODIMM Heatsink | 2 |
| Nut M2 H=3.35mm w/Thread (HEX) | 1 |
| Option: Power Adapter 330W, FSP330-AAAN3 /9NA3300208 | 1 |
The terms HDMI® and HDMI High-De
nition Multimedia Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Product Overview
| No | Description |
|---|---|
| 1 | Antenna Port 1 |
| 2 | Serial Port (COM 2) |
| 3 | Serial Port (COM 1) |
| 4 | Serial Port (COM 4) |
| 5 | Serial Port (COM 3) |
| 6 | Digital Input |
| 7 | Digital Output |
| 8 | ClearCMOS Button |
| 9 | Antenna Port 3 |
| 10 | Antenna Port 4 |
| 11 | Power Switch |
| 12 | HDMI |
| 13 | M.2 Slot (Key M) Status LED |
| 14 | Audio (Mic-in) |
| 15 | Audio (Line-out) |
| 16 | IGN Status LED |
| 17 | DisplayPort |
| 18 | Remote Power On/off Switch (IGN) |
| 19 | USB |
| 20 | VGA Port |
| 21 | PoE1 Port Status LED (PoE 1) |
| 22 | PoE2 Port Status LED (PoE 2) |
| 23 | LAN RJ-45 PoE Port (PoE 2) |
| 24 | LAN RJ-45 Port (LAN 3) (R680E sku) |
| 25 | LAN RJ-45 PoE Port (PoE 1) |
| 26 | LAN RJ-45 Port (LAN 2) |
| 27 | LAN RJ-45 Port (LAN 1) |
| 28 | USB |
| 29 | Serial Port (COM 5) |
| 30 | Serial Port (COM 6) |
| 31 | DC Power Input (DC-IN) |
| 32 | Antenna Port 2 |
Hard Drive: How to Install a 2.5” Hard Drive to the Hard Drive Tray
-
Place a 2.5″ HDD into the tray with the printed circuit board side facing down. Carefully align the mounting holes in the hard drive and the tray.
-
Secure the hard drive using four screws.
-
Slide the drive tray into the HDD bay until the drive is fully seated. Push in the locking lever to lock the HDD tray into place.
SIM Card: How to Install the SIM Card
- Release the screw and remove the SIM card slot cover.
- Insert a SIM card to the SIM card slot.
SIM1 (Upper Slot):
When inserting the SIM Card to the
upper slot, make sure the notch on the SIM card is oriented with the gold
contacts face down.
SIM2 (Lower Slot):
When inserting the SIM Card to the
lower slot, make sure the notch on the SIM card is oriented with the gold
contacts face up.
Rubber Foot: How to Install the Rubber Foot- iEPF-9010S Series
-
Attach four rubber foots to the iEPF-9010S Series and secure them with four screws.
-
Then you can put the iEPF-9010S Series Sto any horizontal surface.
Desk Mounting: How to Install the Desk Mounting Bracket – iEPF-9010S Series
- Attach the two desk mount brackets to the iEPF-9010S Series and secure them with eight screws. 2. Then you can attach the iEPF-9010S Series to any horizontal surface.
Dimension of the iEPF-9010S Series with Desk Mounting Bracket
Installed
Desk Mounting: How to Install the Desk Mounting Bracket – iEP-9010E Series
-
Attach the two desk mount brackets to the iEP-9010E Series and secure them with eight screws.
-
Then you can attach the iEP-9010E Series to any horizontal surface.
Dimension of the iEP-9010E Series with Desk Mounting Bracket Installed
Rubber Foot: How to Install the
Rubber Foot – iEP-9010E Series
-
Attach four rubber foots to the iEP-9010E Series and secure them with four screws.
-
Then you can put the iEP-9010E Series to any horizontal surface.
Position of the iEP(F)-9010E/S Series
The iEP(F)-9010E/S Series should be placed in vertical position only.
Recommended Torque Table
Screw Driver Recommended Torque Value
| Items Secured to Chassis | Value (Kgf-cm) |
|---|---|
| Chassis & Top Case/Heatsink | 3.0 + / – 0.5 |
| Rubber Foot | 3.0 + / – 0.5 |
| Desk Mount | 3.0 + / – 0.5 |
| 2.5” Tray and 2.5” Device | 3.0 + / – 0.5 |
| Items Secured to PCBA | Value (Kgf-cm) |
| DIMM BKT | 2.0 + / – 0.5 |
| Device: M.2 & Mini PCIE Module | 2.0 + / – 0.5 |
| Phoenix DC in & IGN | 2.0 + / – 0.5 |
Warranty Term
– Warranty of host of- iEP(F)-9010E/S Series super m icrocomputer (casing
excluded): 2 year
– Warranty of transformer (including the plug), remote control and wireless
module: 2 year
– Our warranty does not cover the casing of the product, the CD drive, the
metal frame and fastenings and screws, or packaging accessories.
– Data stored in the product may be lost as a result of the repair work or re-
formatting of the hard drive disk. We does not provide data recovery services
or data storage. Please back up your data regularly to protect the data and
avoid loss. For details of our warranty terms, please refer to the individual
warranty statement applicable to the district where your product was bought.
Safety & Regulatory Information
Failure to use the included Power Adapter may violate regulatory compliance
and may expose the user to safety hazards.
Risk of explosion if the battery is replaced with an incorrect type. Batteries
should be recycled where possible. Disposal of used Batteries must be in
accordance with local environmental regulations.
BURN HAZARD
Hot surface! Do not touch! Touching this surface could result in bodily
injury. To reduce risk, allow the surface to cool before touching