CLICKWIN MC02 Magnetic Charging Instructions
- June 17, 2024
- CLICKWIN
Table of Contents
CLICKWIN MC02 Magnetic Charging
parameter
- Prouct model MC02
- Charging input specification DC5V 300mA MAX
- Operating Frequency 446.5~493.5kHz
- WPT Output Power: 1W
- Data cable length 0.7-0.8m
- Description of working principle of wireless charging: The wireless charging module mainly adopts the principle of electromagnetic induction, which couples energy through coils to achieve energy transfer, providing charging for digital products that support wireless charging.
Environment Requirement
Operating Temperature and Relative Humidity 0℃ – 40℃ 20%RH to 80%RH @altitude should be below 10000 feet.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference
received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, Human proximity to the antenna shall not
be less than 20cm(8 inches)during normal operation.
That changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>