PROAIM P-TP-100-B 100mm Bowl Head Tripod Stand Instruction Manual
- October 30, 2023
- PROAIM
Table of Contents
PROAIM P-TP-100-B 100mm Bowl Head Tripod Stand
Product Information
The Proaim 100mm Bowl Head Tripod Stand is a highly stable platform that offers an incredible height range of 31-53 inches. It is equipped with quick horizontal locking knobs for easy functionality and secure height adjustments. The tripod stand is made of High-Grade CNC Aluminum, making it solid and easily accommodating a payload of up to 80kg /176lb at minimum height & 25kg / 55lb at maximum. The feet of the tripod have quick ”on-off’, rubber grip shoes which are custom-made to stabilize and strengthen the tripod.
What’s In The Box
- 3 x Proaim Rubber Tripod Shoes
- Bag Packing 100mm bowl Tripod Stand
Product Usage Instructions
- Inspect the contents of the shipped package to ensure you have received everything listed above.
- Set up the tripod stand by extending the legs to your desired height and securing them with the horizontal locking knobs. Ensurethat the rubber grip shoes are securely attached to the feet of the tripod.
- Attach your camera or other equipment to the bowl head using the appropriate mounting hardware.
- Adjust the angle and position of your equipment using the bowl head and lock it in place.
- When finished, carefully disassemble the tripod stand and store it in the provided bag packing for safekeeping.
Note: Do not exceed the maximum payload weight capacity of 25kg / 55lb at maximum height as this may cause damage to your equipment or the tripod stand itself.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Tripod Stand Setup
- Properly spread and open all the legs of the tripod stand.
- Then, spread the Mid-Level Spreader of the tripod according to your requirements and secure it properly with the help of the provided knobs.
- Attach a rubber tripod shoe to the bottom legs of the stand. Then, pull the rubber tripod shoe grips & secure it.
- Follow the same above process to attach the remaining Rubber Tripod Shoes.
- NOTE: its feet have quick ”on-off’, rubber grip shoes which are custom-made to stabilize and strengthen the tripod.
- To adjust the height of the tripod, loosen all three adjustment knobs. You can adjust the tripod up to the desired height and then re-tighten the knobs securely.
- NOTE: Tripod is an extremely stable platform with an incredible height range of 31”-53”. Equipped with quick horizontal locking knobs, the tripod legs offer easy functionality and secure height adjustments.
- Remove the knob of the 100mm Bowl Fluid Head (Not Included) and mount it on the Tripod Stand.
- Then, properly tighten and secure the knob of the Fluid Head (Not Included) from the bottom.
- Pull and release the Fluid Head knob and then remove the camera plate.
- Then, after removing the camera plate, attach it to the bottom side of the Camera (Not Included).
- After attaching the camera plate to the camera (Not Included), secure it with the help of a screwdriver. Pull the knob of the fluid head, then mount the camera (Not Included), as shown in the image.
- To secure the camera (Not Included), pull and tighten the knob of the Fluid Head.
- NOTE: Precisely engineered with High-Grade CNC Aluminum, it is solid and easily accommodates a payload of up to 80kg /176lb at minimum height & 25kg / 55lb at maximum.
YOUR PROAIM 100MM BOWL HEAD TRIPOD STAND WITH RUBBER TRIPOD SHOES IS ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase.
Within this period of time, we will repair it without charge for labor or
parts. Warranty doesn’t cover transportation costs nor does it cover a product
subjected to misuse or accidental damage. Warranty repairs are subjected to
inspection and evaluation by us. Liability: We are not liable for damage
caused by products that we do not supply or from mishandling in transit,
accident, misuse, neglect, lack of care of the product, or service by anyone
other than our company. Contact Us: In case of any kind of dissatisfaction,
please Contact us immediately and we promise our utmost support and care until
you use our product. 100mm Bowl Head Tripod Stand With Rubber Tripod Shoes
(P-TP-100-B)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>