Ansmann 1600-0222 Portable Headlight Instruction Manual

Ansmann 1600-0222 Portable Headlight

SCOPE OF DELIVERY

• 1x Portable spotlight
• 1x Wall mount
• 1x USB charging cable
• 1x Color filter
• 2x screws
• 2x dowels

First unpack all parts and check them for completeness and damages.
Do not operate the product if it is damaged. Contact your retailer should you find any damage to the product.

INTENDED USE

The product is intended to be used as a mobile light source. It features a built-in rechargeable battery that can be charged via a Micro USB connection. The wall mount with charging function serves as a safe storage system with quick-remove action.

The product is designed exclusively for household use; it is not suitable for commercial purposes.

SAFETY INFORMATION

Carefully read the entire instruction manual before first operating the product. It contains important information on handling the product.

If you give the product to third parties, you must include this instruction manual.

• Keep children away from the product and the packaging. The product is not a toy. Children must always be supervised to ensure that they do not play with the product.

• The product is not intended for use by person (including children) with reduced physical, sensory or mental capabilities or a lack of knowledge and experience in handling the product. Such persons must first receive instructions from a person responsible for their safety or be supervised while using the product!

• Risk of fatal injury due to electric shock! Take care not to damage water, electricity or telecommunications lines while drilling holes.
  Use a cable locator.

• Do not look directly into the beam of light.
  Do not shine the light in the faces of others. Looking into the beam of light for too long may cause damage to the retina due to blue light.

• The product complies with Protection Class III and operates at a harmless voltage range.

• The light bulb is non-replaceable. The entire product must be replaced when the lamp reaches the end of its service life.

• Do not open or modify the product! Repair work and battery pack replacement may only be carried out by the manufacturer, a service  technician authorized by the manufacturer or a similarly qualified person.

• The lamp may be used indoors.

• The USB port to which the product is connected must supply an output current of at least 1 A (1000 mA).

• Always read the safety and operating instructions of any other devices which are connected to the product.

• Keep the product dry at all times.

Caution:

• The product contains a non-replaceable lithium-ion rechargeable battery. Do not throw the product into open flames.
• Always charge the product in a spacious, empty area, removed from flammable materials and liquids. Failure to comply may lead to fire and burn injuries.
• Never attempt to open, crush, heat or set fire to the rechargeable battery.
• Do not use or charge the rechargeable battery if the product appears to be damaged.
• Dispose of used (rechargeable) batteries in keeping with local laws and requirements.

PRODUCT DESCRIPTION

1. Joint
2.  On/off button
3. Mode button
4. LED indicator
5. Holding magnet
6. Charging contacts
7. Micro USB connection with rubber cap
8. Mounting hole
9. Charging contacts
10. Micro USB connection
11. Strain relief
12. USB cable
13. Color filter
14. Screws
15. Dowels

ASSEMBLY

Caution: Mount the product in dry indoor areas only.

1. Mark the positions for the drill holes through the mounting holes.
2. Drill the holes.
3. Insert the dowels.
4. Connect the USB cable to the Micro USB connection on the wall mount.
5. Firmly press the USB cable into the strain relief.
6. Screw on the wall mount.
7. Connect the USB cable to a USB voltage source with at least 1 A output current.

CHARGING

Option A: Place the product in the wall mount.
Option B: Charge the product via the built-in Micro USB connection.

1. Open the rubber cap on the Micro USB connection.
2. Use a suitable cable to connect a USB voltage source with at least 1 A output current.
3. After charging, unplug the USB cable and close the rubber cap.

Power failure system

• Begin charging while the product is turned on.
• As soon as the product is supplied with power, it turns itself off.
• If the power supply is interrupted, the product turns on automatically with approx. 20% luminosity.
• The product turns off again automatically when the power supply is reconnected.

LED indicator (charging)

Note: If you turn the product on during charging, the luminosity is reduced in 100% mode to approx. 20% and in 25% mode to approx. 15%.

OPERATION

• The spotlight unfolds 90° thanks to the joint.
• The magnet holder allows the product to be fastened to most magnetizable surfaces.
• The color filter can be attached to the front of the spotlight if required.

LED indicator (light-ON mode)

Note: Shortly before the rechargeable battery is depleted, the spotlight flashes 3 times once every 15 seconds. From this point, there are only 2 minutes left of light-ON operation.

MAINTENANCE AND CARE

Cleaning

• Always disconnect the power supply before cleaning the product.
• Use only a soft, dry or slightly damp cloth (where necessary with a little mild dishwashing detergent) to clean the product. Never use any abrasive cleaners or solvents to clean the product.

Maintenance
If the product has not been used for 6 months, the rechargeable battery should be charged to maintain its service life.

TECHNICAL DATA

DISPOSAL

At the end of its service life, dispose of the lamp in keeping with all legal requirements. The dustbin symbol indicates that waste electrical and electronic equipment may not be disposed of with normal household waste within the EU. Please use local recycling and collection points or contact the retailer where you purchased the product.

Return the used device to a collection point for used devices.
Do not dispose of the device with household waste as i contains a (rechargeable) battery.
You thus fulfill your statutory obligations and contribute to protection of the environment.

DISCLAIMER

The information contained in this instruction manual is subject to change without prior notice. ANSMANN assumes no liability for direct, indirect, accidental or other types of damage or consequential damage that result from improper handling of the product or failure to comply with the information contained in this instruction manual. We assume no liability and grant no warranty claims in cases of improper use of the product.

WARRANTY INFORMATION

We offer a three-years warranty on the device. Damages to the device due to failure to observe the instruction manual will void the warranty.
This does not affect your legal warranty right.

ANSMANN AG | Industriestrasse 10
97959 Assamstadt | Germany

Hotline: +49 (0) 6294 / 4204 3400
E-Mail: hotline@ansmann.de | www.ansmann.de

References

• ANSMANN AG - We bring products to life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>