Ansmann 1600-0437 cabinet light small LED User Manual
- June 3, 2024
- ANSMANN
Table of Contents
BEDIENUNGSANLEITUNG
1600-0437 cabinet light small LED
User Manual
1600-0437 cabinet light small LED
SAFETY – EXPLANATION OF NOTES
Please take note of the following symbols and words used in the operating
instructions, on the product and on the packaging:
= Information | Useful additional information about the product
= Note | The note warns you of possible damage of all kinds
= Caution | Attention – Hazard can lead to injuries
= Warning | Attention – Danger! May result in serious injury or death
PROPER INTENDED USE
The product serves as a mobile light source and is not intended for use in
other applications. The product is intended exclusively for private, household
use and is not suitable for commercial use or for household room lighting and
is only for use as described in the operating instructions. Use outside that
stipulated in the information is improper use and this can result in damage to
property or personal injury. We accept no liability for damage caused by
incorrect or improper use.
GENERAL SAFETY INSTRUCTIONS
This product may be used by children from the age of 8 and by persons with
reduced physical, sensory or mental abilities or lack of experience and
knowledge, if they have been instructed on the safe use of the product and are
aware of the hazards. Children are not permitted to play with the product.
Children are not permitted to carry out cleaning or care without supervision.
Keep the product and the packaging away from children. Thisproduct is not a
toy. Children should be supervised in order to ensure that they do not play
with the product or packaging. Avoid eye injuries – Never look directly into
the beam of light or shine it into other people‘s faces. If this occurs for
too long, the blue light portion of the beam can cause retinal damage. Never
touch a device that is connected to the mains with wet hands, or if it has
fallen into water. In this case, first switch off the house circuit breaker
andthen pull out the mains plug.
Do not expose to potentially explosive environments where there are flammable
liquids, dusts or gases.
Never submerge the product inwater or other liquids.
Use only an easily accessible mains socket so that the productcan be quickly
disconnected fromthe mains in the event of a fault. All illuminated objects
must be atleast 10cm away from the lamp. Use the product exclusively withthe
accessories included with it.
Never try to open, crush or heat a standard/rechargeable battery or set it on
fire. Do not throw into a fire. The product may only be charged in closed, dry
and spaciousrooms, away from combustible materials and liquids. Disregard can
result in burns and fires.
Leaking battery fluid can cause irritation if it comes into contact with the
skin. Immediately rinse affected areas with fresh water and then seek medical
attention.
Do not short-circuit connection terminals or batteries.
**DANGER OF FIRE AND EXPLOSION
Do not use while still in the packaging.
Do not cover the product – risk of fire.
Never expose the product to extreme conditions, such as extreme heat/cold etc.
Do not use in the rain or in damp areas.
GENERAL INFORMATION**
- Do not throw or drop
- The LED cover cannot be replaced. If the cover is damaged, the product must be disposed of.
- The LED light source cannot be replaced. If the LED has reached the end of its service life, the complete lamp must be replaced.
- Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualified person.
- Disconnect the device from the power supply only by pulling on the plug or plug housing, never on the cable.
- Information for the light and mains adapter as well as mains voltage on the socket must match with the type plate.
- The lamp shall not be placed face-down or allowed to topple face-down.
RECHARGEABLE BATTERY PACK
The product contains a non-replaceable, rechargeable battery pack. If the
rechargeable battery pack is empty, recharge it immediately. Once fully
charged, remove from the charger. In the event of liquid leaking from the
power source, remove this with protective gloves and a dry cloth.
ENVIRONMENTAL INFORMATION | DISPOSAL
Dispose of packaging after sorting by material type. Cardboard and cardboard
to the waste paper, film to the recycling collection.
Dispose of the unusable product in accordance with legal provisions. The
„waste bin“ symbol indicates that, in the EU, it is not permitted to dispose
of electrical equipment in household waste. Use the return and collection
systems in your area or contact the dealer from whom you purchased the
product.
For disposal, pass the product on to a specialist disposal point for old
equipment. Do not dispose of the device with household waste! Always dispose
of used batteries & rechargeable batteries in accordance with the local
regulations and requirements. In this way you will fulfil your legal
obligations and contribute to environmental protection.
PRODUCT DESCRIPTION
- Sensor
- Main light
- Mounting eye
- Charge socket
- On/off button
- Adhesive tape
- Magnetic strip
FIRST USE
- By pressing the button, the light toggles through the colour temperatures: Cool white / natural white / warm white / all LEDs / off
- The sensors and switch-off timer are active (13 seconds) at this time. Movements in the PIR sensor detection range trigger the activation of the LED in the dark or increase the lighting duration.
- By double-clicking in the respective mode, the light stays on continuously. (Confirmed by the light flickering twice.)
- Pressing and holding the button: dimming function
CHARGING
- Connect the USB charging cable to the light. Insert the USB connector into a suitable charger. The charging process is indicated by a red LED. When the light is fully charged, a green LED lights up.
- Charge the light before it is used for the first time!
The product complies with the requirements from the EU directives.
Subject to technical changes. We assume no liability for printing errors.
Kundenservice | Customer service:
ANSMANN AG
Industriestrasse 10
97959 Assamstadt
Germany
Hotline: +49 (0) 6294 / 4204 3400
E-Mail: hotline@ansmann.de
MA-1600-0437/V1/06-2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>