ANSMANN FL800AC Portable Floodlight User Manual

: October 27, 2023
: ANSMANN

Table of Contents

SCOPE OF DELIVERY
INTENDED USE
SIGNS AND SYMBOLS
SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
SETUP INSTRUCTIONS
SETTING THE FLOODLIGHT
STARTING OPERATION
CLEANING
DISPOSAL
DISCLAIMERS
WARRANTY INFORMATION
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANSMANN FL800AC Portable Floodlight User Manual

SCOPE OF DELIVERY

1x Portable floodlight
1x Instruction manual

First unpack the product and check it for completeness and damages. Do not operate the product if it is damaged. Contact your retailer should you find any damage to the product.

INTENDED USE

The product serves as a mobile light source for working spaces, open spaces, etc. It is supplied with power via a power outlet. The product can be set up on the ground, suspended or carried by the handle.
The product is designed exclusively for household use; it is not suitable for commercial purposes.

SIGNS AND SYMBOLS

Please adhere to the following signs and warningsused in the instruction manual, on the product and on the packaging.

= Information
Additional useful information about the product
= Notice
This notice informs the user of possible damages of all kinds
= Warning
Can result in serious injury or death
= Caution
Can result in minor or moderate injuries
= Protection class I
= Do not look into the light beam
= Replace any broken safety cover
= Rough service

SAFETY INSTRUCTIONS

Carefully read the entire instruction manual before first operating the product.
It contains important information on handling the product.
If you give the product to third parties, you must include this instruction manual.

Keep children away from the product and the packaging. The product is not a toy. Children should be supervised to ensure that they do not play with the product.
Before connecting the product with the power supply, always make sure that the supply voltage complies with the information on the rating plate.
This product complies with protection class IP54/ IP65: Protected against the ingress of dust into hazardous and sensitive components. Splashproof. Do not immerse the product in water.
In order to ensure protection class IP44 (splashproof) for the plug, the product must be connected with a power outlet of protection class IP44.
Never touch the product with wet or damp hands.
Always ensure that the power cord is not taut nor comes into contact with sharp objects, chemicals or solvents.
Regularly check the power cord and power plug for damages.
To avoid hazards, the flexible exterior cord of this floodlight, if damaged, may only be replaced by the manufacturer, its service representative or a comparable professional.
This product complies with protection class I and must therefore be connected to the protective earth conductor.
Do not look directly into the beam of light.
Do not shine the light in the faces of others.
Looking into the beam of light for too long may cause damage to the retina due to blue light.
Safe operation cannot be guaranteed if the product shows any kind of damage. If the product is damaged, it must be disposed of or repaired.
Do not repair the product yourself! Have repairs carried out by a professional electrician.
Caution: The light source of this luminaire is not replaceable. When the light source reaches its end of life the whole luminaire shall be replaced.
Warning: Fire hazard! Do not cover the product during operation and keep it away from inflammable surfaces.

PRODUCT DESCRIPTION

LEDs
Handle
Set screws
Power cord with power plug
Suspension eyelet
Stand
Joints

SETUP INSTRUCTIONS

Always carry the product by the handle.
Always set up the product on the stand.
Always suspend the product by the suspension eyelet.
The joints have some resistance to prevent unintentional adjustments. Adjust the angle of the stand slowly, avoid jerky movements.

SETTING THE FLOODLIGHT

Loosen both set screws.
Adjust the angle of the floodlight.
Re-tighten the set screws.

STARTING OPERATION

The product does not have a switch. It is turned on and off directly via the power supply.

Turn on: Plug the power plug into a suitable power outlet.
Turn off: Disconnect the power plug from the power outlet.

CLEANING

Always disconnect the power supply before cleaning the product.
Use only a soft, dry or slightly damp cloth (where necessary with a little mild dishwashing detergent) to clean the product. Never use any abrasive cleaners or solvents to clean the product.

DISPOSAL

At the end of its service life, dispose of the light in keeping with all legal requirements.
The dustbin symbol indicates that waste electrical and electronic equipment may not be disposed of with normal household waste within the EU. Please use local recycling and collection points or contact the retailer where you purchased the product.

You thus fulfill your statutory obligations and contribute to protection of the environment.

DISCLAIMERS

The information contained in this instruction manual is subject to change without prior notice. ANSMANN assumes no liability for direct, indirect, accidental or other types of damage or consequential damage that result from improper handling of the product or failure to comply with the information contained in this instruction manual. We assume no liability and grant no warranty claims in cases of improper use of the product.

WARRANTY INFORMATION

We offer a ten-year warranty on the product.
Damages to the product due to failure to observe the instruction manual will void the warranty.
This does not affect your legal warranty right.

You can find our warranty terms online at www.ansmann.de

TECHNICAL DATA

Mode| 1600-0277: FL800AC| 1600-0278: FL1600AC| 1600-0279: FL2400AC| 1600-0403: FL4500AC| 1600-0404: FL7200AC
---|---|---|---|---|---
Supply voltage| 230 V~, 50/60 Hz| 220-240 V~, 50/60 Hz
Power output in watts| 10 W| 20 W| 30 W| 50W| 80W
IP protection class| IP54 (splashproof)| IP65
IK protection class| IK05
IP protection class (plug)| IP44 (splashproof)
Protection class| I
Luminary type| LED
Colour temperature| 5000 K
Colour rendering index (CRI)| >80 Ra
Nominal luminous flux| 900 lm| 1800 lm| 2700 lm| 4500lm| 7200lm
Max. projection area| 454 cm2| 697 cm2| 827 cm2| 1053 cm2| 2 1211 cm2
Use site| Indoors and outdoors
Operating temperature ta| -20 to +50 °C
Glass dimensions (W x B x D) – approx.| 90 x 124 x 4 mm| 128 x 178 x 4 mm| 147 x 202 x 4 mm| 161 x 213 x 4 mm| 172 x 249 x 5 mm
Dimensions (W x B x D) – approx.| 209 x 217 x 144 mm| 264 x 264 x 149 mm| 289 x 286 x 164 mm| 320 x 329 x 206 mm| 355 x 341 x 227 mm
Weight – approx.| 0,91 kg| 1,4 kg| 1,71 kg| 2,17 kg| 3,13 kg
Rough service| Yes| Yes| Yes| No| No