RAB Wall Pack Series Instructions

Wall Pack Series
Instruction Manual
HIDFA-XXS-H-E26-8CCT-BYP
HIDFA-XXS-H-EX39-8CCT-BYP

RAB Lighting is committed to creating high-quality, affordable, well- designed and energy-efficient LED lighting and controls that make it easy for electricians to install and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com

IMPORTANT

READ CAREFULLY BEFORE INSTALLING LED HID BULBS. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB LED HID Bulbs must be wired in accordance with the National Electrical Code and all applicable codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNINGS:

• Main applications include for use in high bay and other suitable light fixtures.
• Operating temperature: -30°C to 60C(-22F to 140°F).
• These LED Lamps require all ballasts, capacitors, and ignitors to be bypassed or removed. Do not operate lamps on existing ballasts.
• Dimmable with optional control modules.
• Do not use with standard dimmers. Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when  connected to a standard (incandescent) dimmer or dimming control.
• This device is not intended for use with emergency exits.
• For use in enclosed fixtures.
• Before installation make certain the AC power to the fixture is off.
• Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Check for enclosed wiring and components.
• Risk of fire or electric shock. LED Retrofit lamp installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a  qualified electrician.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• Installers should not disconnect existing wires from lampholder terminals to make new connections at lampholder terminals. Instead installers should cut existing  lampholder leads away from the lampholder and make new electrical connections to lampholder lead wires by employing applicable connectors.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs or drawings and where the  input rating of the retrofit kit does not exceed the input rating of the luminaire.
• Use only with a portable luminaire that is provided with a shade.
• Added weight of the device may cause instability of a free-standing portable luminaire.
• THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE  DETERMINED BY AUTHORITIES HAVING JURISDICTION.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

LAMP INSTALLATION

1. Turn off the power before installation Remove old ballast or disconnect from existing lampholder. Shown as Figure’ Remove and dispose of ballast in correct manner.  (North America 100-277/AC)
   

2. Reconnect directly to the existing lamp holder. Shown as Figure 2 (North America 100-277VAC)
   

3. Select power and color temperature (CT) of new LED replacement lamp before installation.

4. Install new LED replacement amp. Shown as Figure 3. Please make sure the old fitting is correctly grounded Attach retrofit label to luminare (North America 100- 277VA)
   

Securely fasten the ground wire to the main body structure. If the wire is damaged in any way please replace. (Do not use existing burnt out wire). If needed, the replacement ground wire must be 1.0mm in size and insulated from heat.

SELECTABILITY Power and CCT Selectable

Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.

HIDFA-205-H-E26-8CCT-BYP
HIDFA-20S-H-EX39-8(CT-BYP| SW| 3000K
10W| 4000K
20W| S000K
HIDFA-305-H-E26-8(CT-BYP
HIDFA-30S-H-EX39-8(CT-BYP| l0W| 3000K
20W| 4000K
30W| S000K
Model Number| Power Selectable| CCT Selectable
---|---|---
HIDFA-40-H-E26-8(CT-BYP
HIDFA-40$-H-EX39-8(CT-BYP| 20W| 3000K
30W| 4000K
40W| S000K
HIDFA-60S-H-EX39-8(CT-BYP| 20W| 3000K
40W| 4000K
60W| S000K

HORIZONTAL LAMP SUPPORT INSTALLATION

Only for 30W 40W 60W lamps

For face-down installation use the two-legged Support and cut to desired length (Fig. 4)

For face-out installation use the one-legged support and cut to desired length (Fig. 5)

© 2023 RAB LIGHTING Inc.
Cranbury, New Jersey 08512USA
COHB-IN-0123
rablighting.com Visit our website for product info
Tech Help Line Call our experts: 888 722-1000
e-mall Answered promptly – sales@rablighting.com
Free Lighting Layouts Answered online or by request
RAB WARRANTY: RAB’s warranty is subject to all terms and conditions found at rabfighting.com/warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>