socket mobile DuraScan D600 NFC and RFID Contactless Refurbished Instructions
- June 5, 2024
- socket mobile
Table of Contents
socket mobile DuraScan D600 NFC and RFID Contactless Refurbished
Instructions
Instructions
Step 1: Remove Battery Door
Use screw driver to loosen screw and remove battery door.
Step 2: Remove Battery
Use a flat head screw driver and place in the top right corner to gently push the battery out. Then, pull the connector to remove.
Step 3: Insert New Battery
Plug the connector on the new battery.
Step 4: Secure Battery Door
Ensure the battery door is properly placed, then screw the battery door back on.
Step 5: Use a wall charger to charge battery until the battery light turns
solid green (up to 8 hours)
Charging Requirements:
Min 5.0 VDC, 1 AMP
Max 5.5 VDC, 3 AMPs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>