AT T IMSC10 Magnetic Stand Charger User Guide

AT T IMSC10 Magnetic Stand Charger

Thank you for buying AT &T IMSC10! 
Please read this quick start guide before using the device to ensure safe and proper use.

Features

• Charge your Mag-Safe compatible phones and AirPods® at the same time with Mag-Safe wireless charging pad.
• Delivering wireless charging up to 15W for iPhone® 12 and 13 devices with the use of a QC 3.0 Quick Charge™ adapter (QC adapter not included) and 5W for AirPods®.
• Unit can be used vertically or horizontally as well as having an adjustable viewing angle.
• Charge your iPhone® devices more efficiently with a strong magnetic connection and easy alignment.
• Includes 3 ft / 1.0 m USB C to Type-C Charging Cable.

What’s included

Product Appearance

Operating Steps

1. Connect the included Type C cable to an adapter or a QC 3.0 or PD adapter for fast charging (QC 3.0 adapter not included) to power the unit.
2. Place Mag-Safe compatible phones on top ring to begin charging.
3. Place your Airpods® or any Qi® wireless compatible phone to begin charging

Tips Before Using:

1. Before charging, please remove the phone case, or use a phone case that supports magnetic wireless charging for a better charging experience.
2. If the case is too thick, we suggest you take off the Non Mag-Safe Phone Case
3. Magnetic alignment function is only compatible with iPhone® 13/12 series.

Charging Status Indicator

1. Place the device directly on the bottom ring to start charging. The blue light will turn on to indicate the unit is being charged.
2. If your phone was placed improperly or any foreign object that might affect the device is nearby, the status indicator light will start flashing.

Charging Status Indicator Chart For Wireless Charging Airpods® Area

Over-temperatured

Over Voltaged

| Red light flash

Compatible Devices

• 15W output
• All Qi® compatible wireless devices (Use with PD/QC3.0 adapter)
• 5W output
• for AirPods® 2 (with wireless charger)
• AirPods Pro®(with wireless charger)
• Other wireless charging devices (Qi® compatible) with use of PD/QC 3.0 adapter

NOTE:

1. To fast charge both phone and Airpods®, we recommend you
   use a 20W PD adapter (not included) or at least a 20W PD Charger.

2. Magnetic charging pad is suitable only for smartphones that support magnetic charging (such as iPhone 13®/13 Pro®/Max™/Mini®/12®) or for smartphones with magnetic charging cases.

Product Specification

• Type C Input: 5V/3A , 9V/2.22A , 12V.2A
• Wireless Output(Mobile): 5W, 7.5W, 10W, 15W
• Airpods Output: 5W (Max)
• Dimension: 6.44’’ X 4.9’’ X 2.26’’
• Weight: 13.4oz

1 YEAR LIMITED WARRANTY

The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC
at www.att.com/electronics or call 1(888) 920-8680 from the USA or Canada. Concept 101 LLC warrants that the product will be free from defects in material, parts and workmanship for the period of one (1) year from date of purchase. Concept 101 LLC agrees that it will, at its option, replace the defective product with either a new or remanufactured product equivalent to your original purchase during the warranty period. Please be advised the returned product must carry the proof of purchase.

Exclusions and limitations
Concept 101 LLC does not warrant that the product will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this user’s manual. Concept 101 LLC has made every effort to ensure that this user’s manual is accurate and disclaims liability for any inaccuracies or omissions that may have occurred. Information in this user’s manual is subject to change without notice and does not represent a commitment on the part of Concept 101 LLC. Concept 101 LLC reserves the right to make improvements to this user’s manual and/or to the products described in this user’s manual at any time without notice. If you find information in this quick start guide that is incorrect, misleading, or incomplete, please contact us through our website.

Important Safety Instructions

1. Always clean the unit using a dry cloth, do not use liquids or any cleaners.
2. Do not use attachments not recommended by the manufacturer.
3. The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
4. The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
5. Do not place the unit on an unstable table, stand, tripod, or bracket. This may result in serious personal injuries and damage to the unit.
6. If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
7. Do not place the wireless charging cover solely on the wireless charger. Doing so may overheat the charger and cause fire. It may result in damaging the device or may result in serious burns.

Compliance with FCC Regulations

The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / television technician for assistance.

© 2022 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue 1.1 AT&T 2/2022.
iPhone®, AirPods® and AirPods Pro® are registered trademarks of Apple Inc., registered in the U.S. and other countries. The ‘Qi’ symbol and Qi are registered trademarks of the Wireless Power Consortium. The Quick Charge™ are registered trademarks of Qualcomm Technologies, Inc. Other trademarks and trade names are those of their respective owners.
www.att.com/electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>