AT T APM7210 Business Wi-Fi Extender User Guide

: June 2, 2024
: AT&T

Table of Contents

Instruction for use
DEVICE LAYOUT
GETTING STARTED
ALTERNATIVE PAIRING
SOFTWARE UPDATE
LEGAL
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AT T APM7210 Business Wi-Fi Extender

AT T APM7210 Business Wi-Fi Extender

Instruction for use

STEP 1

Plug in the extender with the included power adapter.

STEP 2
Wait for the extender to power up and for the LED lights to turn solid. (Approx. 2-3 minutes)

STEP 3
*Pair the extender with your AT &T 5G Gateway.
Wireless Method
Step 1 For the best experience, place the extender next to the 5G gateway during setup.
Step 2 Press WPS (Wi-Fi Protected Setup) button on the back of the 5G gateway. The Wi-Fi LED will flash blue.
Step 3 Press WPS button on the back of the extender.
Step 4 The Wi-Fi LED on both the extender and 5G gateway will change to solid blue and the Mesh LED will illuminate.
Step 5* Setup complete, move extender to desired location.

Connection with AT&T Internet Air™ for Business 5G Gateway required (gateway and internet service sold separately)
Wi-Fi extender placement and proximity.
The extender should be placed within wireless range of the 5G gateway, no more than 30 feet away.
The design and structure of your environment may impact performance. For best results, position the extender closer so the Mesh LED illuminates green.
Connect your devices to the extender’s Wi-Fi or Ethernet ports.
Network name & password
The extender will share the same network name and password as the 5G gateway it’s paired with.
Web UI Settings
You can manage additional settings from the Web UI of your 5G gateway.

DEVICE LAYOUT

Get to know your device

Front
Back
Bottom
Top

GETTING STARTED

LED status table

Get started

Note: If the Mesh LED is blue or red, you might try relocating the extender closer to the gateway or extender it’s paired with to get a stronger mesh connection.

ALTERNATIVE PAIRING

Alternative pairing method

Step 1 Connect one end of an Ethernet cable in the main gateway port of your choice.
Step 2 Connect the other end to the Ethernet port of your choice on your extender
Step 3 The Mesh LED on the extender will illuminate.

5G Gateway
Extender

SOFTWARE UPDATE

Complete firmware update

Auto-Update

Your Wi-Fi extender will periodically check for updates, including after each device power cycle. Most updates will be automatically installed overnight. If an update requires manual installation, the system light will illuminate solid blue until the update has been completed.

Manual Update

Step 1 Use a web browser to access the Web UI of the main 5G gateway.
Note: You can find the default web address on the gateway label.
Step 2 From the dashboard, click the Wi-Fi Extender tile.
Step 3 Click Check for update next to the device name.
Step 4 The status will update to indicate if an update is available.
Step 5 Click Download and Update . A progress bar will appear, and the System LED Light will flash blue during the installation process.
Step 6 Your Wi-Fi extender will power cycle upon successful completion.

Note: Your internet access may be momentarily interrupted while the installation is taking place, and the device is rebooting.

NOTE: All device illustrations need to be replaced with actual device images. All graphics, logos and text MUST be a minimum of 3/16” or 0.1875” away from folds and die cut edge.

LEGAL

Network performance and internet speeds may vary due to proximity, connection method, or number of extenders connected. No more than three extenders recommended. Internet service sold separately. 5G available only in 5G coverage areas.

©2024 AT&T INTELLECTUAL PROPERTY. ALL RIGHTS RESERVED. AT&T, the Globe and other marks are trademarks of AT&T Intellectual Property. All other product or service names are the property of their respective owners.