smartwares CMS-30400 Wireless Outdoor Security Camera Set Instruction Manual
- June 8, 2024
- smartwares
Table of Contents
Instruction manual
CMS-30400 | Wireless outdoor security camera set
PARTS DESCRIPTION
Camera
- Antenna
- LED light
- Lens
- Day/night sensor
- Reset button
- Power input
- Power adaptor for camera DC12V 1A
Monitor
- Antenna
- Touch screen
- Microphone (not for use with this model)
- LED battery indicator
- LED recording indicator
- USB slot
- MicroSD slot
- On/Off switch for battery use
- AC adaptor input
- Stand
- Power adaptor for monitor DC5V 2.5A
INSTALLATION
The cameras are plug and play, they are already pre-paired to the recorder.
- Connect the monitor to the power supply by inserting AC adapter.
- Optional: Insert a MicroSD card (not included) in the slot on the right side of the monitor.
- Screw the antenna onto the camera.
- Connect the AC adaptor from the camera (7) to the power port (6) and plug it in to a socket.
→ NOTE: Before mounting the camera to the wall, first check if the wireless distance to the monitor is sufficient.
ON-SCREEN MENU
The on screen menu appears when you tap in the video feed.
| No: | Button | Description |
|---|
1
| Speaker| Select to mute/unmute the monitor speakers
2
| Home| Select to enter the main menu
3
| Zoom| Select to Zoom the video feed.
Tap once to select the zoom mode.
Tap again in the image to zoom.
Select the (-) icon to exit the zoom mode.
4
| Playback| Select to enter the Playback menu.
This will allow you to view recordings.
WIRELESS INTERNET
Do the procedure below to enable the wireless internet connection. This feature is optional but it enables you to use the following features:
- App connectivity
- Time and date synchronization.
-
Make sure that you have an internet connected WIFI router, your password and router name (SSID) available.
-
From the main menu: Select “System Setup”.
-
Select “Wireless Internet”.
-
Enable WLAN.
-
Select “Hotspot list”.
-
Find and select your wireless router.
-
Type your password.
→ NOTE: Only 2.4GHz networks are supported -
Download the “SW360” app.
-
Open the app, register as a new user and follow the instructions given in the app.
CONNECT ADDITIONAL CAMERAS
The monitor can pair up to 4 cameras.
-
Turn the camera on by connecting it to the mains supply.
-
Wait for 30 seconds.
-
You will now hear: “Start configuration mode”.
NOTE: if you don’t hear the voice, press the re-set button on the camera for 6 seconds until you hear “Restore factory setting”. -
On the monitor from the main menu: Select “Add Camera”.
-
Select “Add Camera”.
-
On the camera: If the above steps are done correctly, you will hear:
– “Wireless settings, please wait”
– “Wireless connection successful” -
On the monitor: Wait for the pairing to complete.
Technical data:
Wireless technology: Wi-Fi
Operating frequency: 2,4 GHz
Max. radio-frequency power: 18.30 dBm
Information for power adapters:
Monitor:
Output DC5V 2.5A
Input: 100-240V 50/60Hz
Camera:
Input: 100-240V 50/60Hz
Output: DC 12V 1A
Use only the power adaptors supplied
MORE INFORMATION
For more information go to : www.smartwares.eu and search for CMS-30400
smartwares Europe
Swaardvenstraat 65
5048 AV Tilburg
The Netherlands
Documents / Resources
|
smartwares CMS-30400 Wireless Outdoor Security Camera
Set
[pdf] Instruction Manual
CMS-30400, Wireless Outdoor Security Camera Set, Security Camera Set, Wireless
Outdoor Camera Set, Outdoor Camera Set, Outdoor Camera, Camera
---|---