Nadoli DSB6122BK Sliding Bathtub Screen Instruction Manual
- June 1, 2024
- Nadoli
Table of Contents
DSB6122BK
39″ Sliding
Baththub Screen
DSB6122BK Sliding Bathtub Screen
*When reversed to right side please follow the instruction guide on page 5.
Dimension of shower door : (666-990)mm X 1400mm(H) (26″-39″) X 55″(H)
Glass thickness : 6mm
Profile adjustment :+1 5mm/9/1 6″
Rev: Feb 06, 2024
♦ General Information
* Informations generales
Please inspect the product immediately upon receipt for transit damage,missing
packs/parts or manufacturing fault.Damage reported later cannot be
accepted.Please handle the product with care avoiding knocks and shock loading
to all sides and edges of the glass.
Notes: Safety glass can not be re-worked
Please read these nstructions carefully before start of installation.
Special care should be taken when drilling walls to avoid hidden pipes or
electrical cables.
Note: This product is heavy and may require two people to install.
Aftercare instructions
After use, your shower should be cleaned with soap and water.This s
particularly important in hard water districts where insoluble lime salts may
be deposited and allowed to build up.Cleaners of a gritty or abrasive nature
should not be used.Care should be taken to avoid contact with strong chemicals
can be used but with cauition,if in doubt contact the manufacturer of the
cleaner in question.
Please keep these instructions for aftercare and customer service details.
Tools Required 
**** This product is heavy and may require two people to install 
Required Parts
Item no.in exploded
drawing picture| Description| CITY| Item no.in exploded
drawing picture| Description| QTY
---|---|---|---|---|---
1| Wall Post| 1| 9| Screws M4x8| 3
2| Water Deflector| 2| 10| Screw cover caps| 3
3| Door Panel| 1| 11A| Rollers A| 2
4| Handle Set| 1| 1113| Rollers B| 2
5| Post Cover Cap| 1| 12| Top Hinge mounting block| 1
6A| Rail caps A| 3
6B| Rail caps B| 3| 13| Bottom Hinge mounting block| 1
7| Wall Plugs| 3
8| Screws M4X35| 3| 14| Jubrication oil| 1
♦ Installation Steps
Step 2
FACTORY SETTING LH
2.1-2.2 Screw off, taking out the barrel hinges & plate
2.3-2.6 Screw on after silicion
Step 2
To turn to RH, please flollow steps as following
2.1-2.2 Screw off, taking out the barrel hinges & plate
2.3 Rotating the door as instructions stated below
2.4-2.7 Screw on after silicion
*Remark: only glass turn,top and bottom
hing no need.
LIMITED WARRANTY
By choosing a NADOLI product, a eader in the plumbing industry, you are sure
to make the right choice. On top of the quality materials that are used to
make their products, NADOLl’s advanced manufacturing processes also benefit
its products’ quality and ongevity. To attest to this, they decided to offer
their customers a beneficial warranty.
We certify that our products will meet your needs with their style, but also
with their manufacturing quality. To make sure that they are reliable and
safe, each product was carefully inspected, tested and approved during the
quality control process that is in place.
To whom does this warranty apply?
NADOLI offers a 10-year limited warranty on shower bases and doors from the
date of purchase, exclusive to the first buyer as long as he/she resides in
the same property. The warranty is ntended for residential and/or domestic
use.
Care instructions
Clean the product with water and a mild detergent. Abrasive or corrosive
cleaners, steel wool, acetone, dry cleaning products or ammonia compounds must
never be used to clean the product. If a shower mat s used, it must be removed
right after each use. We recommend the use of cleaning products that are made
for acrylic specifically.
What is covered by the warranty?
| 1 Year| 10 Years
---|---|---
Bases and walls| Drain, drain cover, polypropylene and PVC| Acrylic and
fiberglass against manufacturing defects
Shower doors| Wheels, handles, diverter, screws, rails, towel bars and guide|
Tempered glass
Shower Niches| Finish against any manufacturing defects|
*From the date of purchase.
Should there be any manufacturing defects that are not covered by the
warranty, the product will need to be inspected prior to following through
with the claim. Without that verification, the brand will assume no charge
and/or responsibility.
What are the exclusions?
This warranty is applicable on all NADOLI products purchased on or after
January l5t, 2018.
The warranty doesn’t apply if the product is damaged as a result of misuse,
overuse or non-residential use, neglect, ack of maintenance, or the use of
corrosive or abrasive products, regardless of the person who did those
damages. The warranty does not cover shipping and labour costs. The warranty
does not apply to the normal tear and wear of the goods.
The warranty doesn’t cover the damages caused by the acts of God or breakage
resulting from a shock or mishandling, regardless of the part played by the
buyer or the nstaller. It also excludes the damages caused by an mproper
installation.
NADOLI doesn’t cover damages caused by a water leak, even if they result
directly or indirectly from a product defect, except where the applicable
egislation does not allow any exclusion or limitation following indirect or
consequential damages.
t is fair to say that if the product has a manufacturing defect, t will show
as soon as it is installed or shortly after. However, a leak caused by an
mproper nstallation could happen a ong time after. Therefore, it is strongly
advised to have it done by a professional.
All warranty claims must include the invoice copy.
Should a part or product component be defective or the finish damaged
following a normal domestic and residential use, NADOLI commits to replacing
the defective part(s) to the first buyer only. NADOLI could also, in its sole
discretion, commit to offer a full replacement. No indemnity shall be claimed
for loss of enjoyment of life, loss of income or losses caused by water.
Rev: 2 november 2023