Good Earth Lighting GL1348-WHG-03LF0-G USB Ring Full Spectrum LED Grow Light with Adapter Instruction Manual
- June 3, 2024
- Good Earth Lighting
Table of Contents
Good Earth Lighting GL1348-WHG-03LF0-G USB Ring Full Spectrum LED Grow Light with Adapter
Hardware kit
Required
- Actual hardware may differ from illustration
SAFETY INFORMATION
WARNING: TO AVOID ELECTRIC SHOCK, DISCONNECT POWER BEFORE INSTALLING!
ATTENTION
-
* DO NOT attempt to alter the fixture. The fixture is not manufactured with parts that are serviceable or replaceable.
- DO NOT ALTER THE PLUG OR CORD.
- DO NOT look directly at LED light source when on. LED grow light is designed to mimic the sun. Use eye protection when working near light
WARNING
-
* DO NOT INSTALL LIGHT WHILE UNIT IS PLUGGED IN.
- DO NOT plug the USB cord into the power source until installation is complete.
CAUTION
-
* DO NOT USE THIS FIXTURE ON A DIMMING CIRCUIT. USE DIMMING CONTROLS ON LIGHT TO ADJUST OUTPUT.
- Suitable for damp locations.
- USE CARE WHEN WATERING PLANTS TO NOT POUR WATER DIRECTLY ON LIGHT.
USB Adapter parameters & UL/ETL safety statement
- Read and follow all instructions carefully and heed all warnings. Keep instructions for future reference
- To reduce the risk of fire and electric shock, do not use this product near water. Do not allow this product to come into contact with water, rain, or other moisture
- Clean only with a dry cloth. Do not clean when unit is connected to power
- Maintain adequate distance around the product to provide sufficient of ventilation and accessibility
- Do not install near heat sources including radiators, heat registers, stoves, open flame, and other apparatus (including amplifiers) that produce heat
- Use care to protect the power cord and plug from pinching or trampling. Use caution when installed on a moving surface such as a cart or table
- Use only attachments/accessories specified by the manufacturer
- To reduce risk of shock, unplug the product during lightning storms or when used for extended periods of time
- This product is not intended to be serviceable. If product does not operate as intended, please purchase a replacement
- Caution marking and rating plate is located on the bottom of the product
- Use product only in moderate controlled climates
- Maximum ambient temperature around the product must not exceed 40°
- For connection to a power supply not un the U.S.A, use an appropriate adapter to connect to the local power outlet. Do not exceed the maximum voltage rating printed on the product.
INSTALLATION
OPERATION
Adjust telescoping stake
Function Controller
Increase brightness by short pressing 5 light levels (100%/80%/60%/40%/20%). Long press and hold for 5 seconds, it will be at 100%
Decrease brightness by short pressing 5 light levels (100%/80%/60%/40%/20%). Long press and hold for 5 seconds, it will be at 20%
8H: Light is “ON” for 8 hours and “OFF” for 16 hours.
12H: Light is “ON” for 12 hours and “OFF” for 12 hours.
16H: Light is “ON” for 16 hours and “OFF” for 8 hours. 9.8 in.
NOTE: The timer is on a 24-hour cycle. The light will turn on
automatically the same time everyday. Do not manually turn off the light or
cut the power source. If that happens, reset the timer function by selecting
the timer again.
Press to turn on and off. Light indicator will be on if the light fixture is on.
TROUBLESHOOTING GUIDE
Light does not come on.
Timer has malfunctioned.
Stake is not adjusting.
Light is dimmer than usual.
Still trouble shooting.
3-YEAR LIMITED WARRANTY
Good Earth Lighting® – The manufacturer warrants this lighting fixture to be
free from defects in materials and workmanship for a period of (3) years from
the date of original purchase by the consumer. The fixture is not warrantied
for use in a commercial or retail application. The warranty is limited to use
in a residential environment. We will repair or replace (at our option) the
unit in the original color and style if available, or in a similar color and
style if the original item has been discontinued, without charge. Defective
units must be properly packed and returned to the manufacturer with a letter
of explanation and your original purchase receipt showing date of purchase.
Call 1-800 291-8838 to obtain a return authorization number and an address
where to ship your defective product. Note: C.O.D. shipments will NOT be
accepted. The liability of the manufacturer is in any case limited to
replacement of the defective light fixture product. The manufacturer will not
be liable for any other loss, damage, labor costs, or injury which is caused
by the product. This limitation upon the liability of the manufacturer
includes any loss, damage, labor costs, or injury which is (I) to person or
property or otherwise; (II) incidental or consequential in nature; (III) based
upon theories of warranty, contract, negligence, strict liability, tort, or
otherwise; or (IV) directly, or indirectly related to the sale, use, or repair
of the product. This warranty gives you specific rights, and you may also have
other rights which vary from state to state.
FCC STATEMENT: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Caution:
Changes or modifications of this product is not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment. NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: — Reorient or relocate
the receiving antenna.– Increase the separation between the equipment and
receiver. — Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. — Consult the dealer or an
experienced radio/TV technician for help.
FCC responsible party name : Good Earth Lighting Inc. Address: 1400 E Business
Center Drive, STE 108 Mount Prospect, IL 60056 USA. Telephone number:
1-800-291-8838
Please visit our website at: https://goodearthlighting.com/contact-us
or call the Customer Care Center
1-800-291-8838, 8:30 a.m.-5 p.m.,
CST, Monday-Friday.
Good Earth Lighting® 1400 East Business Center Drive, Ste. 108 Mount
Prospect, IL 60056
Good Earth Lighting®
is a registered trademark of Good Earth Lighting, Inc.
© 2022 Good Earth Lighting, Inc. REV08.22
Por favor, viste nuestro sitio web en:
www.goodearthlighting.com/support
o llame al Centro de
Atención al Cliente al 1-800-291-8838,
de 8:30 a.m. a 5 p.m., Hora Central (CST), de lunes a viernes.
Good Earth Lighting® 1400 East Business Center Drive, Ste. 108 Mount
Prospect, IL 60056
Good Earth Lighting® es una marca registrada de Good Earth Lighting,
Inc. © 2022 Good Earth Lighting, Inc. REV08.22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>