Simx FAN5653 High Speed Hand Dryer Instruction Manual
- June 13, 2024
- Simx
Table of Contents
INSTALLATION INSTRUCTIONS
High Speed Hand Dryer
FAN5653 – White
TECHNICAL SPECIFICATIONS
Supply: 220 – 240V AC
Total Power: 1100 Watts
Air Speed: 95 m/s
Drying Time: 10-15 sec
Housing: ABS
Sound Level: 70 db(A)
Safety: Class I
IP Rating: IPX1
IK Rating: IK08
Dimensions (A x B x C): 248 x 250 x 178 mm
Net Weight: 3.2 kg
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
IMPORTANT
This product is suitable for use only with a supply voltage of 230-240V AC,
50Hz.
All electrical work must be carried out in accordance with local and national
electrical codes as applicable.
We strongly recommend that this device is installed by a registered
electrician.
Always switch power off prior to installation. A means of mains power
isolation must be installed in the circuit for the purpose of safe access for
any internal cleaning, recalibration, or maintenance.
This device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Young children should be supervised to ensure that they do not play with the
appliance.
Any changes or modifications made or attempted to this product, without the
prior written approval of the manufacturer, will void any and all stated
warranties.
INSTALLATION INSTRUCTIONS
Note: This unit must be fixed to a solid supporting wall. Mounting above
shelves or over stainless steel/reflective surface counters may interfere with
sensor operation and is not recommended.
To ensure the ease of installation and subsequent maintenance of this unit,
the horizontal distance to any adjacent wall should not be less than 200mm.
- Unscrew front panel from the bottom of the unit.
- Disconnect power indicator plug from the BASE (see Figure A).
- Align base of unit on desired wall location and mark mounting hole locations (see Figure B).
- Drill holes and installed supplied wall plugs.
- Fix base to the wall using screws provided.
- Install power indicator plug back into the BASE and reinstall front panel.
- Plug unit into approved power point.
- Check hand dryer operations.
SERVICING AND MAINTENANCE
- This unit must be isolated from the power supply during routine maintenance.
- This unit should be serviced every 3 months or more frequently to remove dust, fluff or any other build up from the filter inlet and outlet grill areas (see label on unit).
- Do not attempt to disassemble unit as this may void the product warranty.
WARRANTY
This product is guaranteed by Simx Ltd for 24 months from the date of purchase
against faulty materials or workmanship which affects its design ability to
switch and operate. During this period if the product has a defect of this
nature it will be repaired or replaced free of charge by Simx with the same
item, or a similar one of higher specifications, ON THE CONDITIONS THAT:
The buyer returns it to the seller from whom it was bought, freight paid.
The product has been bought by the user, i.e. a receipt/sales invoice is
produced as a proof of purchase.
The product has not been misused or handled carelessly, installed in anyway
contrary to the installation instruction, or installed in any unusually
exposed or harsh environmental conditions.
This guarantee excludes liability for any discolouration or delamination of
paint or plastic, or any user replacement parts. It does not confer any rights
other than those expressly set out above and does not cover any claims for
consequential loss or damage.
Our Goods come with guarantees that cannot be excluded under the Australian
and New Zealand Consumer Law. You are entitled to a replacement or refund for
a major failure and for compensation for any other reasonably foreseeable loss
or damage.
You are also entitled to have the Goods repaired or replaced if the Goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
Specifications are subject to change without notice.
Distributed by Simx (NZ) and Ventair (AUS)
PO Box 14 347, Panmure, Auckland, NZ.
Technical Support (09) 259 1662
e:sales@simx.co.nz
www.simx.co.nz
www.ventair.com.au
PUB1279 2205
Documents / Resources
| Simx
FAN5653 High Speed Hand
Dryer
[pdf] Instruction Manual
FAN5653 High Speed Hand Dryer, FAN5653, High Speed Hand Dryer, Speed Hand
Dryer, Hand Dryer, Dryer
---|---