hombli Smart Smoke Detector-13User Manual

hombli Smart Smoke Detector-13

Thanks for your purchase!
Great choice to invest into the safety of yourself and your loved ones inside your home, with the Hombli Smart Smoke Detector. Getting a notification through the Hombli app, wherever you are, helps you to take action and prevent loss or damage. If you accidentally trigger the alarm while exploring your cooking skills, you don’t have to rapidly try to reach for the ceiling. Instead you can just turn it off with your smartphone. Need extra help? Visit the support page on our website: hombli.com/support.

Follow the steps below in order to successfully install the Smart Smoke Detector. Some steps are optional.

What’s in the box?

1. Smart Smoke Detector
2. Bracket
3. Magnetic mount
4. 2x Screw
5. 2x Plug

Power on

The product must be activated before use. Press the Hombli logo for 5 seconds until the red LED indicator blinks and you hear a beep.

Connect the Smart Smoke Detector to the app

• Download the Hombli App
• Create an account and log in
• Create a family
• Turn on the Bluetooth on your phone
• To pair the Smart Smoke Detector, press the Hombli logo on the front of the product 4 times. You will now see a fast flashing red light.
• Add a new product
• Wait until a pop-up appears and follow the instructions in the app
• Follow the instructions in the app

Testing the Smart Smoke Detector

Press and hold the Hombli logo on the Smart Smoke Detector to test the alarm. The alarm gets louder with every beep. The final beep, after 9 seconds, has the same volume as the alarm in case of an emergency. The device connects to the Wi-Fi network and send a test notification through the Hombli app. Conduct this manual test monthly.

Note: DO NOT test your alarm using an open flame. This may damage the smoke alarm and its sensor, or start a fire.

Mounting the Smart Smoke Detector

Follow the next steps to mount your Smart Smoke Detector

Location advice
Install multiple Smart Smoke Detectors in your home to ensure maximum protection.

Before installing this device, also check your local legislation.

Recommended locations

• Required by law in most countries:     At least one on every floor where people live
• Highly recommended:                       All bedrooms, hallways and remote rooms
• Extra protection:                              Living room, attic and basement

DO NOT place the Smoke Detector here:

• Next to air vents, fans and central heating
• Dusty, dirty areas, areas with insects and easily polluted places (Garage)
• Places with difficult access (making it difficult to operate the test function)
• Next to doors or windows
• Close to a fireplace or a wood-burning stove
• Areas with high humidity or cooking fumes (Kitchens, bathrooms)

Placement advice

• In the middle of the ceiling (if that is not possible, install it at least 30cm away from corners)
• If the length of the room or hall is more than 9m long, multiple Smart Smoke Detectors should be installed
• If the wall or ceiling is slanted, the Smart Smoke Detector needs to be installed at least 50cm away from the highest wall or ceiling point in the room
• If the Smart Smoke Detector is installed on the wall, it should be at least 10cm away from the ceiling.

Check the Wi-Fi connection

After you have found a good position to mount your Smart Smoke Detector, check the Wi-Fi signal. When you are standing where you want to mount the Smart Smoke Detector, check the Wi-Fi connection of your smartphone or conduct a manual test of the Smart Smoke Detector, by pressing the logo to check if you get a notification. If the Wi-Fi connection is good, continue to the following paragraph 4.4. If the Wi-Fi signal is poor, try to find another position, or move your router closer to the preferred location, or use an access point or extender.

Installing the Smart Smoke Detector
Before installing the Smart Smoke Detector, choose between three mounting options. We do not recommend using option 2 if the surface has a rough texture. For ease of maintenance, we recommend using option 1.

Option 1 – Magnetic mount and a screw

Option 2 – Magnetic mount and 3M tape
Note: Clean the surface before sticking the 3M tape to the ceiling.

Option 3 – Screw based installation

Maintenance

Clean the Smart Smoke Detector at least once a month with a vacuum cleaner with the brush nozzle. While cleaning the device, also check the alarm function, like described in step 3. In the Hombli app, view the log to see if the daily automatic battery and sensor check is successful.

Beeps and LED flashes

turned off

| Beeps 3 times and pau- ses once. Continues until the alarm is turned off| Turn off the alarm in the Hombli app or by pressing the Hombli logo on the product
Silence mode| Red LED flashes once every 8 seconds (lasts 10 minutes)| No beeps| After 10 minutes the device resets automatically
Low Battery status| Red LED flashes once every 60 seconds| 1 beep every 60 seconds| Replace the device as soon as possible. Turn off the power by pressing and holding the Hombli logo for 15 seconds until the red LED indicator blinks twice and beeps twice.
Fault status| No LED flashes| 1 beeps every 40 seconds| Clean the device (according to step 5). If the beeping continues, the device is malfunctioning. Replace the device or contact the customer service.
Pairing mode| Red LED flashes once every second| No beeps| The device is ready to con- nect. Pair the Smart Smoke Detector by flowing the steps in the Hombli app
Status| LED indication| Sound indication| Action
---|---|---|---
Pairing| Green LED flashes fast| No beeps| The device is connecting to the Hombli app. Wait until the LED stops flashing and the Smart Smoke Detector is successfully added to your app.
Alarm test| Red LED flashes a maximum of 9 times, while you keep pressing

the Hombli logo

| Maximum of 9 beeps, while you keep pressing the Hombli logo| Check if you get a notificati- on through the Hombli app. Repeat this manual test every month.

Troubleshooting

turned on (step 1). Now press and hold the Hombli logo again to test. If this does not work, contact our customer service.
The Smart Smoke Detector beeps and flashes a red light every minute.| The battery is low. Please replace the device as soon as possible. Turn off the power by following step 1.
The Smart Smoke Detector beeps every 40 seconds| 1. Clean the device (according to step 5)

2. If the beeping continues, the device is malfunctioning. Replace the device or contact our customer service.

The alarm triggers intermittently or when residents are cooking or taking showers, etc.| 1. Clean the device (according to step 5)

2. Move the device to different location. Check step 4.1 for recommended locations and locations to avoid.

The Smart Smoke Detector does not connect to the Hombli app| 1. Check the Wi- Fi signal (according to step 4.3)

2.  If the Wi-Fi signal is poor, try to find another spot, move your router closer to the preferred location, or use an access point or extender.

Alarm goes off
When the alarm of the Smart Smoke Detector goes off, first make sure that you know the cause. In case of a fire, get yourself and others safely outside and call the emergency number. If you have made sure that you, and other members of the household are not in danger, turn off the alarm.

Silence the alarm
To turn off the alarm, use the Hombli app to turn it off or press on the Hombli logo on the device. The alarm of the Smart Smoke Detector will become inactive for 10 minutes. The red LED now flashes once every 8 seconds. After 10 minutes, the Smart Smoke Detector resets. If the device still detects smoke after 10 minutes, the alarm will go off again.

Product specifications

• Type Photoelectric smoke alarm
• Alarm volume ≥85 dB at 3m
• Silencing time ~10 min
• Dimensions 120 * 31.5mm
• Working area Up to 40m²
• Wireless connection Wi-Fi, 802.11 b/g/n
• Battery Non-removeable CR14505, DC3V Lithium battery
• Battery life 10 years
• Operating current <30μA (standby); <70μmA (alarm)
• Working temperature 0°C~40°C
• Working humidity ≤95%RH non-condensing
• Smoke sensitivity Mmin= 0.09 dB/m, Mmax= 0.17 dB/m

Important safety instructions

• Make sure you have read and understood the manual before installing and using this product. Only use this product in the ways described in this manual.
• Replace the device when the manufacturing date has been reached. This date can be found on the sticker on the product.
• The device is only suitable for residential use indoors.
• If the product is defective, do not attempt to repair the device but replace the device with a new one.
• Do NOT paint over or cover the product.

The notifications in the Hombli app requires a functional Wi-Fi connection. If the Smart Smoke Detector detects smoke, but has no connection to your Wi-Fi- network, the alarm will go off like normal. However, you will NOT get a notification on your phone. Therefore, you should never solely rely on these notifications.
All electronic devices, including this Smart Smoke Detector, have a chance of failing. There is a chance that, in case of a fire, the device will not warn you because the alarm did not go off, or because the alarm did not go off in time. Make sure you test your Smart Smoke Detector regularly to maximize the chance of being alerted in time by the device.

EU Declaration of Conformity and Performance
This device is in compliance with the essential requirements and other relevant provisions of the following EU Directives:

• Directive 2011/65/EU
• Directive 2014/53/EU

A copy of the EU Declaration of Conformity and the Declaration of Performance are available at www.hombli.com/compliance
Wireless RF mode frequency band: 2.412 to 2.484 GHz
Maximum transmitted power. 20 dBm
The WEEE symbol means that a device must be disposed of separately from general household waste. When a device reaches the end of its lifespan, it must be taken to a designated waste collection point for safe disposal or recycling. This conserves natural resources, protects human health and helps the environment. Details to this are defined by the national law of the respective country.

Hombli is a registered brand of Avanca lnternational BV.
Maanweg 174
2516 AB, The Hague
The Netherlands

References

• Support - Hombli
• Compliance - Hombli

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>