NAVITEL MSR500 Portable Video Recorder User Manual
- June 7, 2024
- NAVITEL
Table of Contents
NAVITEL MSR500 Portable Video Recorder User Manual
Introduction
Dear Customer! Thank you for purchasing this NAVITEL® product. NAVITEL MSR500 is a multifunctional high-definition DVR with many functions and features that are described in this User Manual. Please read the manual carefully before using the device and keep it for future reference.
Device layout
- Mount port
- Port mini-USB
- Power
- OK
- Menu
- LCD screen
- LED indicator
- Up
- Down
- microSD slot
- Microphone
- Reset
- Speaker
- Camera
- Night light
Buttons
Note: The built-in battery is designed only for recording an emergency event in parking mode and turning off the device correctly when the power is turned off. For the full operation of the device in any mode, a constant power connection is required.
NAVITEL s.r.o. hereby declares that the device NAVITEL MSR500 is compatible with the European directive EMC 2014/30/EU. The full text of Declaration of conformity is available at the following internet address: www.navitel.cz/en/declaration_of_conformity/msr500
Device functions
Format SD-card
Formatting a microSD card in the DVR is necessary for the correct operation of
the device. Before using a microSD card or in case of data error, please
format the microSD card. For formatting the SD-card in Menu mode select Format
SD-card and confirm it.
Video
Connect the device to an external power supply and it will start recording
automatically (indicated by the flashing blue light). Press the OK button to
stop recording (the blue light will become steady). Press OK again to record
another video. Each video will be saved automatically.
Photo
In Video Recording mode, press the Menu button to enter Capture mode,
press the OK button to take a photo (it will be saved automatically).
Playback
In Video Recording mode, press the Menu button twice to enter Playback
mode; press the Up and Down buttons to select a file; press the OK button to
play a file. During playback, press OK to pause/un pause; press the Up and
Down keys to fast forward/rewind.
Lock file
In Video Recording mode, press Power to protect the current recording. A key
symbol will appear at the bottom of the screen. In Playback mode, select a
file, press Menu and select Protect, then Lock Current or Lock All. Protected
files cannot be deleted or overwritten. Select Unlock Current / Unlock All to
remove protection.
Record audio
Record video with or without sound.
Loop recording
This feature allows you to save a video as a set of files given in the
duration menu. If the memory card runs out of space, the unprotected files
will be overwritten in the order in which they were created.
G-sensor
If the vehicle is hit by something, the DVR will automatically lock the
current video.
Night light
Turn on when it’s dark to improve image brightness.
Stamp
This function adds date stamp or device logo to the record. Click “OK” to
select type of stamp or to switch the function off.
Parking monitor
When the device in the standby mode will detect the vibration, it will
automatically start recording. If for one minute vibration will not happen
again, the device goes into standby mode.
Motion detection function is available in the Parking mode (disabled by
default). In the Video recording mode, select “Motion event REC”. When an
object is moving the device will automatically start recording. If the object
does not move for more than 10 seconds, recording stops.
Battery
Red indicator lights up when the device is plugged into an external power
supply; as the battery is charging, the red light will gradually dim; the red
light going out means the battery is full.
Screen saver
The device can automatically shut off the screen to reduce power consumption;
time interval can be set in the Screen Saver menu.
Installation
-
Stop the car engine.
-
Put the microSD card into the DVR.
Note: use a high-speed SD card (Class 6 or above); capacity should be within 8-64 GB.
• To avoid malfunctions of the DVR and / or SD-card, don’t insert and remove SD-card during DVR operation.
• Before using a microSD card, please format it inside the DVR to avoid data errors. For formatting the SD-card in Menu mode select Format SD-card and confirm it. -
Secure the device on the windshield with the bracket.
-
Connect the car charger to the cigarette lighter socket.
-
Connect the mini-USB interface to the car charger with the charger extension cord. Note: charger extension cord can be placed along the edge of the windscreen.
-
Adjust the camera position; make sure the lens is facing parallel to the ground.
-
Start the engine; check whether the device is installed correctly.
Note: if the device is installed correctly, the indicator will glow red; the device will start up and begin recording (indicated by flashing blue light).
Precautions
- Use only the original charger adapter. Using another adapter may negatively affect the device’s battery.
- Do not use the device in humid or hot environment.
- Keep the lens clean.
- Do not disassemble the device and do not perform repairs by yourself.
- Strictly follow the laws and regulatory acts of the region where the device is used. This device can not be used for illegal purposes.
- Permissible ambient temperature in operating mode: 0 to +35 °. Storage temperature: +5 to +45 °. Relative humidity: 5% to 90% without condensation (25 °).
Specifications
References
- NAVITEL Prohlášení o Shodě
- NAVITEL Declaration of Conformity
- NAVITEL Deklaracja Zgodności
- NAVITEL Prehlásenie o Zhode
- NAVITEL detailed offline maps for iPhone, iPad, Android
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>