hombli B08X9ZLHS5 Smart Doorbell 2 User Manual

hombli B08X9ZLHS5 Smart Doorbell 2

Thanks for your purchase!
We are glad you chose the Hombli Smart Doorbell 2. From now on you can always see who is at your door via the Hombli app on your smartphone. In this manual you will find a clear explanation of the steps you need to follow to successfully install your Smart Doorbell 2. Need extra help? Then have a look at our instruction video or contact our customer service.

What’s in the box?

1.  Hombli Smart Doorbell 2
2.  Bracket
3.  Corner Mount
4.  3M Tape
5.  2x Screws
6.  Security Screw
7.  2x Screws and Plugs
8.  2x Wire Nuts
9.  2x Wire Extensions
10.  Hex Key
11.  USB charging cable

Connect the Hombli Smart Doorbell to the app

Follow the steps below to connect the Smart Doorbell to the Hombli app and your Wi-Fi network

Download the Hombli App

Create an account and log in

Create a family

Add a new product

Select the Smart Doorbell from the Cameras category.

To turn on the Smart Doorbell, press and hold the power button on the back for 3 seconds. The button of the Smart Doorbell will now flash red.

Select the correct Wi-Fi network and enter the password.

Scan the QR code that is shown on your phone with the camera of the Smart Doorbell.

The Smart Doorbell plays a sound if you successfully scanned the QR code. It will now connect to your Wi-Fi network..

Continue to the next screen. The Smart Doorbell will again play a sound to confirm it has been paired and is ready for use.

Pair the Hombli Chime

Do you have a Hombli Chime? Pair it to the Smart Doorbell before you mount it on the outside of the house. To install it follow the steps in the manual of the Chime.

Check Wi-Fi connection

Before you start mounting, please check if the Smart Doorbell connects with your Wi-Fi network at your door. Do this by pressing the button of the Smart Doorbell at your door and check if you receive a video stream in the app.

Fully charge the battery

To charge the Smart Doorbell, lift the side cover and insert the micro-USB cable. Connect the other end of the cable to a 5V power adapter or a USB port.

Local storage

To use local storage, lift the cover on the side of the Smart Doorbell and insert a MicroSD card (maximum 128GB). The app automatically provides an additional menu in the settings.

Removing the existing doorbell

Before you start mounting the Smart Doorbell on a wall, door or frame, please follow the steps below.

Notes : If your existing doorbell is not using a wired chime, it is not possible to connect the Smart Doorbell directly to the two wires. The Smart Doorbell can handle an alternating voltage of 8-24V. If you need help with this process or live in a country where it is illegal to work in the fuse box, hire a qualified electrician.

• Turn off the power of the existing doorbell.
•  Test if the power is cut off by ringing your existing doorbell. It went well if you do not hear a chime.
• Now remove the existing doorbell from the wall or frame.

Place the Bracket (or Corner Mount)

Follow the steps to place the Bracket or optional Corner Mount on your door, wall, or frame. Use the optional Corner Mount to give your Smart Doorbell a 25° angle for a better view on your walkway and visitors coming towards your door.

Decide if you want to use the Corner Mount, which gives the Smart Doorbell an angled view. This is optional.

Determine at which height you want to place the Smart Doorbell. We recommend a height between 140 and 150 cm for an ideal viewing angle. Also consider the placement of the wiring of your existing doorbell.

Choose between two mounting options. Recommended option: screw and plug set (continue to step 4). Alternative option: double-sided 3M tape (continue to step 6).

Note : Choose for the 3M tape option if you install the Smart Doorbell on a smooth and clean surface or if you do not want to drill holes.

Draw where the screws should be. Use the Bracket or Corner Mount for this.

Drill two holes for the plugs and insert them. Skip this step when installing on a wooden surface.

Mount the Bracket or Corner Mount with the screws set or 3M tape. If you choose to install with the Corner Mount, mount it first. Then you place the bracket on the Corner Mount.

Connect wiring

Follow the steps below to connect your existing doorbell wires to the Smart Doorbell

For a wired installation, insert the two  wires through the upper large opening and  hold the Bracket or Corner Mount in the desired position.

Loosen the screws on the back of the Smart Doorbell with approximately 3 rotations. Attach the wires of the old doorbell. Then tighten the screws firmly again.

If the existing wires are too short to connect to the back of your Smart Doorbell, please use the provided wire extenders and wire nuts. Strip the wire extender, insert together with the existing wire in the wire nut and twist them together.

Place the Hombli Smart Doorbell in the bracket

Attach the Smart Doorbell to the bracket by inserting the top of the Smart Doorbell into the bracket and then pressing the bottom side into the bracket. Tighten the safety screw at the bottom with the supplied Hex key.

Turn on power with a wired installation

Switch the power back on in the junction box back so that there is voltage on your Smart Doorbell. Test whether your existing chime responds to the Smart Doorbell by pressing the button on the Smart Doorbell.

Connect to Google and Alexa

The Smart Doorbell is compatible with Google Assistant and Amazon Alexa speakers. Check out our installation guides and instruction videos to learn how to connect them.

Do you want to stream camera footage from the Smart Doorbell to the Google Nest Hub or Amazon Echo Show? Activate this feature at www.hombli.com/support/#contact

Cloud Storage

With Hombli cloud storage you always have enough storage space to save videos from the past 7 days. Activate this paid service in the Hombli app.

App interface

Here we explain what all icons mean in the Smart Doorbell app interface.

• Microphone Mute or unmute audio in the app.
• Speak Tap to talk to visitors.
• Screenshot Tap to take screenshots.
• Record Tap to record videos.
• Playback Watch locally stored videos.
• Cloud Storage Watch videos that are stored in the cloud.
• Alarm Scare off unwanted visitors.
• Photo Album View saved screenshots and videos.
• Pencil Go to the settings screen to configure your Smart Doorbell.

Frequently Asked Questions

Do you have questions about the Hombli Smart Doorbell 2? Find answers to frequently asked questions at our online FAQ page:

CONTACT

• + 31 702 210 077
• support@hombli.com

References

• Smart Doorbell 2 - Hombli
• Support - Hombli
• Hombli Smart Doorbell 2 instruction video - Hombli
• Smart Doorbell 2 - Hombli
• Support - Hombli

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>